📦 linux-manual

82568 pages · page 65 of 413

D (continued)

dm_crtc_additional_color_mgmt(9)enable additional color properties✨
dm_crtc_high_irq(9)Handles CRTC interrupt✨
dm_crtc_high_irq_handler(9)Common OTG vblank/flip event handling✨
dm_dcn_vertical_interrupt0_high_irq(9)Handles OTG Vertical interrupt0 for DCN generation ASICs✨
dm_dmub_aux_setconfig_callback(9)Callback for AUX or SET_CONFIG command.✨
dm_dmub_outbox1_low_irq(9)Handles Outbox interrupt✨
dm_early_create(9)create a mapped device in early boot.✨
dm_helpers_parse_edid_caps(9)Parse edid caps✨
dm_hw_fini(9)Teardown DC device✨
dm_hw_init(9)Initialize DC device✨
dm_init_init(9)parse "dm-mod.create=" argument and configure drivers✨
dm_irq_work_func(9)Handle an IRQ outside of the interrupt handler proper.✨
dm_ism_get_idle_allow_delay(9)Calculate hysteresis-based idle allow delay✨
dm_ism_insert_record(9)Insert a record into the circular history buffer✨
dm_ism_next_state(9)Get next state based on current state and event✨
dm_mst_test_atomic_best_encoder(9)Test MST encoder selection✨
dm_mst_test_atomic_check_no_old_crtc(9)Test atomic check no-op path✨
dm_mst_test_aux_result_ebusy(9)invalid reply / engine acquire map to -EBUSY.✨
dm_mst_test_aux_result_eio(9)HPD/unknown/protocol errors map to -EIO.✨
dm_mst_test_aux_result_success(9)AUX_RET_SUCCESS preserves the input result.✨
dm_mst_test_aux_result_timeout(9)AUX_RET_ERROR_TIMEOUT maps to -ETIMEDOUT.✨
dm_mst_test_aux_transfer_error_result(9)transfer errors are remapped.✨
dm_mst_test_aux_transfer_hpd_discon_quirk(9)HPD disconnect quirk succeeds.✨
dm_mst_test_aux_transfer_native_read(9)native AUX read through DM callback.✨
dm_mst_test_aux_transfer_native_write(9)native AUX write through DM callback.✨
dm_mst_test_aux_transfer_non_ack_reply(9)non-ACK AUX reply is logged.✨
dm_mst_test_aux_transfer_partial_write(9)partial write reports byte count.✨
dm_mst_test_create_fake_mst_encoders(9)Test fake MST encoder setup✨
dm_mst_test_detect_unregistered(9)Test detect skips unregistered connector✨
dm_mst_test_down_rep_msg_ready_wrapper(9)Test DOWN_REP wrapper✨
dm_mst_test_fill_payload_flags_i2c_read_mot(9)I2C read with MOT request decode.✨
dm_mst_test_fill_payload_flags_native_read(9)native read request decode.✨
dm_mst_test_fill_payload_flags_native_write(9)native write request decode.✨
dm_mst_test_fill_payload_flags_write_status(9)write status update decode.✨
dm_mst_test_fp_guarded_public_stubs(9)Test FP-off public fallbacks✨
dm_mst_test_initialize_dp_connector_edp(9)Test eDP initialization path✨
dm_mst_test_initialize_dp_connector_mst(9)Test MST root initialization path✨
dm_mst_test_msg_ready_mask(9)ESI mask selection per message-ready type.✨
dm_mst_test_needs_dsc_aux_workaround_low_sink_count(9)Test workaround skipped for single sink✨
dm_mst_test_needs_dsc_aux_workaround_match(9)Test workaround triggers for matching device✨
dm_mst_test_needs_dsc_aux_workaround_rev12(9)Test workaround triggers for DPCD rev 1.2✨
dm_mst_test_needs_dsc_aux_workaround_wrong_dev_id(9)Test workaround skipped for wrong device✨
dm_mst_test_needs_dsc_aux_workaround_wrong_rev(9)Test workaround skipped for unsupported rev✨
dm_mst_test_needs_dsc_aux_workaround_zero_sink_count(9)Test workaround skipped for zero sinks✨
dm_mst_test_pbn_divider_null_link(9)Test pbn_divider with NULL link✨
dm_mst_test_pbn_divider_uses_link_bandwidth(9)Test pbn_divider with link cap✨
dm_mst_test_reset_connector_setting(9)Test MST connector setting reset✨
dm_mst_test_retrieve_branch_no_parent(9)Test branch lookup needs a parent port✨
dm_mst_test_retrieve_branch_reads_oui(9)Test branch OUI parsing✨
dm_mst_test_retrieve_downstream_aux_error(9)Test downstream read failure✨
dm_mst_test_retrieve_downstream_no_aux(9)Test retrieval bails out without AUX✨
dm_mst_test_retrieve_downstream_present(9)Test retrieval parses DPCD 0x05✨
dm_mst_test_select_esi_dpcd_esi(9)1.2+ DPCD ESI address/length.✨
dm_mst_test_select_esi_dpcd_legacy(9)pre-1.2 DPCD ESI address/length.✨
dm_mst_test_sideband_msg_ready_no_ready_bits(9)Test idle sideband event✨
dm_mst_test_sideband_msg_ready_read_error(9)Test ESI read failure path✨
dm_mst_test_sideband_msg_ready_without_mst_state(9)Test ready bit no-op path✨
dm_need_dp_aux(9)Does this source transition require the DP AUX handle?✨
dm_parse_device_entry(9)parse a device entry✨
dm_parse_devices(9)parse "dm-mod.create=" argument✨
dm_parse_table(9)parse "dm-mod.create=" table field✨
dm_parse_table_entry(9)parse a table entry✨
dm_path_uevent(9)called to create a new path event and queue it✨
dm_pflip_high_irq(9)Handle pageflip interrupt✨
dm_plane_color_pipeline_active(9)Check if a plane's color pipeline active.✨
dm_register_dmub_notify_callback(9)Sets callback for DMUB notify✨
dm_send_uevents(9)send uevents for given list✨
dm_test_abort_fused_io_no_dmub_srv(9)Test fused IO abort is a safe no-op without DMUB service✨
dm_test_adaptive_sync_type_converter_no_conditions(9)Converter without caps✨
dm_test_adaptive_sync_type_converter_nonwhitelist(9)Converter not whitelisted✨
dm_test_adaptive_sync_type_converter_partial_conditions(9)Partial caps✨
dm_test_adaptive_sync_type_none_default(9)Test Adaptive sync type none default✨
dm_test_adaptive_sync_type_pcon_whitelist(9)Test Adaptive sync type pcon whitelist✨
dm_test_add_common_modes_edp_adds(9)Test eDP adds the smaller common modes✨
dm_test_add_common_modes_non_edp_noop(9)Test non-eDP/LVDS adds no modes✨
dm_test_add_freesync_modes_null_edid_noop(9)Test NULL EDID adds no modes✨
dm_test_add_fs_modes_no_preferred_mode(9)Test no preferred mode yields no modes✨
dm_test_add_modifier_appends_value(9)Verify one modifier append.✨
dm_test_add_modifier_grows_capacity(9)Verify add triggers growth and preserves old data.✨
dm_test_add_modifier_noop_when_mods_null(9)Verify helper is a no-op on NULL mods list.✨
dm_test_adjust_colour_depth_10bpc_passes(9)Test Adjust colour depth 10bpc passes✨
dm_test_adjust_colour_depth_16bpc_no_fallback(9)Test Adjust colour depth 16bpc cannot fall back✨
dm_test_adjust_colour_depth_420_halves_clk(9)Test Adjust colour depth 420 halves clk✨
dm_test_adjust_colour_depth_420_reduces(9)Test Adjust colour depth 420 reduces✨
dm_test_adjust_colour_depth_fits_at_888(9)Test Adjust colour depth fits at 888✨
dm_test_adjust_colour_depth_invalid_depth(9)Test Adjust colour depth invalid depth✨
dm_test_adjust_colour_depth_none_fits(9)Test Adjust colour depth none fits✨
dm_test_adjust_colour_depth_reduces_12bpc_to_10bpc(9)Test Adjust colour depth reduces 12bpc to 10bpc✨
dm_test_adjust_colour_depth_reduces_to_888(9)Test Adjust colour depth reduces to 888✨
dm_test_apply_clock_for_voltage_eopnotsupp(9)Test EOPNOTSUPP treated as success✨
dm_test_apply_clock_for_voltage_fail(9)Test DPM error returns false✨
dm_test_apply_clock_for_voltage_invalid_type(9)Test invalid clock type path✨
dm_test_apply_clock_for_voltage_success(9)Test successful voltage request✨
dm_test_apply_delay_nonzero_wait(9)Test a non-zero wait interval executes delay path✨
dm_test_apply_delay_null_sink(9)Test a NULL sink returns without delay✨
dm_test_apply_delay_zero_wait(9)Test a zero wait interval skips the delay✨
dm_test_apply_display_requirements_dpm_disabled(9)Test DPM-disabled path✨
dm_test_apply_display_requirements_dpm_enabled(9)Test DPM-enabled path✨
dm_test_apply_edid_quirks_disable_colorimetry(9)Test SDC VSC-disable quirk✨
dm_test_apply_edid_quirks_disable_fams(9)Test SAM panel FAMS-disable quirk✨
dm_test_apply_edid_quirks_dpcd_poweroff_delay(9)Test GBT 0x3215 delay quirk✨
dm_test_apply_edid_quirks_remove_sink_ext_caps(9)Test AUO 0x317 clear quirk✨
dm_test_apply_edid_quirks_skip_phy_ssc(9)Test DEL 0x4147 PHY SSC quirk✨
dm_test_apply_edid_quirks_unknown_noop(9)Test unknown panel id is a no- op✨
dm_test_apply_synaptics_fifo_reset_wa_first_fail(9)Test FIFO reset early exit✨
dm_test_apply_synaptics_fifo_reset_wa_full(9)Test full FIFO reset sequence✨
dm_test_are_sinks_equal_both_null(9)Test Are sinks equal both null✨
dm_test_are_sinks_equal_different_edid_data(9)Test Are sinks equal different edid data✨
dm_test_are_sinks_equal_different_edid_length(9)Test Are sinks equal different edid length✨
dm_test_are_sinks_equal_different_signal(9)Test Are sinks equal different signal✨
dm_test_are_sinks_equal_first_null(9)Test Are sinks equal first null✨
dm_test_are_sinks_equal_full_edid_identical(9)Test Are sinks equal full edid identical✨
dm_test_are_sinks_equal_full_edid_last_byte_differs(9)Test Are sinks equal last byte differs✨
dm_test_are_sinks_equal_identical(9)Test Are sinks equal identical✨
dm_test_are_sinks_equal_second_null(9)Test Are sinks equal second null✨
dm_test_are_sinks_equal_zero_length(9)Test Are sinks equal zero length✨
dm_test_aspect_ratio_16_9(9)Test Aspect ratio 16 9✨
dm_test_aspect_ratio_256_135(9)Test Aspect ratio 256 135✨
dm_test_aspect_ratio_4_3(9)Test Aspect ratio 4 3✨
dm_test_aspect_ratio_64_27(9)Test Aspect ratio 64 27✨
dm_test_aspect_ratio_no_data(9)Test Aspect ratio no data✨
dm_test_atomic_async_check_overlay_cursor(9)Verify overlay cursor rejection.✨
dm_test_atomic_async_check_rejects(9)Verify async check rejections.✨
dm_test_atomic_blend_lut_bypass(9)amdgpu_dm_atomic_blend_lut bypass: no LUT, linear TF -> bypass✨
dm_test_atomic_check_color_pipeline_conflict(9)Verify color conflict rejection.✨
dm_test_atomic_check_edp_native_keeps_scaling(9)Test native eDP mode is left alone✨
dm_test_atomic_check_helper_failure(9)Verify helper-check failures return.✨
dm_test_atomic_check_lvds_non_native_enables_scaling(9)Test non-native LVDS turns on scaling✨
dm_test_atomic_check_missing_crtc_state(9)Verify missing CRTC state fails.✨
dm_test_atomic_check_no_dc_state(9)Verify missing DC plane state succeeds.✨
dm_test_atomic_check_non_mst_returns_zero(9)Test non-MST connectors short-circuit✨
dm_test_atomic_check_scaling_failure(9)Verify scaling-info failures return.✨
dm_test_atomic_destroy_state_no_context(9)Test destroying DM atomic state without a DC context✨
dm_test_atomic_dup_state_copies_fields(9)Test atomic_duplicate copies fields✨
dm_test_atomic_get_new_state_empty(9)Test empty atomic state has no DM state✨
dm_test_atomic_get_new_state_match(9)Test atomic state returns matching DM private state✨
dm_test_atomic_lut3d_data_forwarded(9)Non-zero size: LUT data forwarded to tetrahedral_17✨
dm_test_atomic_lut3d_nonzero_state_bits(9)Non-zero size: state bits and mode flags must be set✨
dm_test_atomic_lut3d_zero_size(9)Zero LUT size: initialized must be cleared, no LUT data written✨
dm_test_atomic_shaper_blend_srgb(9)Non-linear TFs enable shaper and blend✨
dm_test_atomic_shaper_lut_bypass(9)No LUT and linear TF: must take bypass path✨
dm_test_audio_component_bind_sets_fields(9)Test bind wires up audio component✨
dm_test_audio_component_get_eld_copies_matching_connector(9)Test ELD lookup✨
dm_test_audio_component_get_eld_no_match(9)Test ELD lookup miss✨
dm_test_audio_component_unbind_clears_fields(9)Test unbind tears down component✨
dm_test_audio_fini_without_enabled_audio(9)Test fini exits when audio is not enabled✨
dm_test_audio_init_disabled(9)Test audio init exits when audio is disabled✨
dm_test_audio_init_enabled_success(9)Test init deeper path when audio is enabled✨
dm_test_audio_init_pins_sets_defaults(9)pin entries are initialised to default values✨
dm_test_audio_init_pins_zero_count(9)zero audio_count leaves num_pins at zero✨
dm_test_backlight_caps_aux_support_noop(9)Test Backlight caps aux support noop✨
dm_test_backlight_caps_non_aux_sets_defaults(9)Test Backlight caps non aux sets defaults✨
dm_test_backlight_caps_valid_short_circuit(9)Test Backlight caps valid short circuit✨
dm_test_backlight_device_index_matches_second(9)Test matching second backlight device✨
dm_test_backlight_device_index_missing_fallback(9)Test missing backlight device fallback✨
dm_test_backlight_fill_props_ac_linear(9)Test AC brightness and linear scale✨
dm_test_backlight_fill_props_dc_nonlinear(9)Test DC brightness and non- linear scale✨
dm_test_backlight_fill_props_default_range(9)Test default properties without caps✨
dm_test_backlight_get_brightness_uses_device_index(9)Test get_brightness wrapper✨
dm_test_backlight_get_level_aux_error(9)Test AUX readback fallback✨
dm_test_backlight_get_level_aux_success(9)Test AUX brightness readback✨
dm_test_backlight_get_level_pwm_error(9)Test PWM readback fallback✨
dm_test_backlight_get_level_pwm_success(9)Test PWM brightness readback✨
dm_test_backlight_set_level_aux_programs_power_module(9)Test AUX programming path✨
dm_test_backlight_set_level_connector_off(9)Test connector-off cache path✨
dm_test_backlight_set_level_no_stream(9)Test no-stream early return✨
dm_test_backlight_set_level_pwm_programs_power_module(9)Test PWM programming path✨
dm_test_backlight_set_level_reallows_idle(9)Test idle-optimization toggle path✨
dm_test_backlight_update_status_no_stream(9)Test update_status wrapper✨
dm_test_bandwidth_update(9)Test placeholder bandwidth update is callable✨
dm_test_brightness_from_user_aux(9)Test Brightness from user aux✨
dm_test_brightness_from_user_max(9)Test Brightness from user max✨
dm_test_brightness_from_user_midrange(9)Test Brightness from user mid- range value✨
dm_test_brightness_from_user_null_caps(9)Test Brightness from user null caps✨
dm_test_brightness_from_user_with_curve(9)Test Brightness from user with custom curve active✨
dm_test_brightness_from_user_zero(9)Test Brightness from user zero✨
dm_test_brightness_range_aux(9)Test Brightness range aux✨
dm_test_brightness_range_null_caps(9)Test Brightness range null caps✨
dm_test_brightness_range_pwm(9)Test Brightness range pwm✨
dm_test_brightness_range_zero_signals(9)Test Brightness range with zero min and max signals✨
dm_test_brightness_to_user_above_max(9)Test Brightness to user above max✨
dm_test_brightness_to_user_at_max(9)Test Brightness to user at max✨
dm_test_brightness_to_user_at_min(9)Test Brightness to user at min✨
dm_test_brightness_to_user_below_min(9)Test Brightness to user below min✨
dm_test_brightness_to_user_midpoint_pwm(9)Test Brightness to user midpoint pwm✨
dm_test_brightness_to_user_null_caps(9)Test Brightness to user null caps✨
dm_test_build_pm_display_cfg_per_display(9)Test per-display translation✨
dm_test_build_pm_display_cfg_scalar_fields(9)Test scalar field translation✨
dm_test_build_wm_clock_ranges_dmif(9)Test reader (DMIF) watermark sets✨
dm_test_build_wm_clock_ranges_mcif(9)Test writer (MCIF) watermark sets✨
dm_test_cacp_caps_edp_oled_supported(9)Test CACP enabled on eDP OLED✨
dm_test_cacp_caps_edp_supported(9)Test CACP supported on a new eDP panel✨
dm_test_cacp_caps_excluded_ip_316(9)Test CACP disabled on DCE IP 3.1.6✨
dm_test_cacp_caps_ip_3_1_6_unsupported(9)Test CACP unsupported on DCE 3.1.6✨
dm_test_cacp_caps_lcd_panel(9)Test CACP disabled on LCD panel✨
dm_test_cacp_caps_lcd_unsupported(9)Test CACP unsupported on an LCD panel✨
dm_test_cacp_caps_lvds_oled_supported(9)Test CACP enabled on LVDS OLED✨
dm_test_cacp_caps_lvds_supported(9)Test CACP supported on an LVDS panel✨
dm_test_cacp_caps_non_edp_lvds_unsupported(9)Test CACP unsupported on a non-eDP/LVDS signal✨
dm_test_cacp_caps_non_edp_signal(9)Test CACP disabled on non-eDP/LVDS signal✨