📦 linux-manual

82568 pages · page 64 of 413

D (continued)

dfll_set_force_output_enabled(9)enable/disable force output✨
dfll_set_force_output_value(9)set fixed value for force output✨
dfll_set_frequency_request(9)start the frequency change operation✨
dfll_set_mode(9)change the DFLL control mode✨
dfll_set_open_loop_config(9)prepare to switch to open-loop mode✨
dfll_tune_low(9)tune to DFLL and CPU settings valid for any voltage✨
dfll_unlock(9)switch from closed-loop to open-loop mode✨
dfll_unregister_clk(9)unregister the DFLL output clock✨
dfs_cache_canonical_path(9)get a canonical DFS path✨
dfs_cache_destroy(9)destroy DFS referral cache✨
dfs_cache_find(9)find a DFS cache entry✨
dfs_cache_get_tgt_referral(9)returns a DFS referral (@ref) from a given target iterator (@it).✨
dfs_cache_get_tgt_share(9)parse a DFS target✨
dfs_cache_init(9)Initialize DFS referral cache.✨
dfs_cache_noreq_find(9)find a DFS cache entry without sending any requests to the currently connected server.✨
dfs_cache_noreq_update_tgthint(9)update target hint of a DFS cache entry without sending any requests to the currently connected server.✨
dfs_cache_remount_fs(9)remount a DFS share✨
dfs_parse_target_referral(9)set fs context for dfs target referral✨
dfs_pattern_detector_init(9)constructor for pattern detector class @param region: DFS domain to be used, can be NL80211_DFS_UNSET at creation @return instance pointer on success, NULL otherwise✨
dget(9)get a reference to a dentry✨
dget_dlock(9)get a reference to a dentry✨
DH Helper Functions(9)✨
diag204(9)Issue diagnose 204 call.✨
diag210_get_dev_info(9)retrieve device information via diag 0x210✨
diag210_to_senseid(9)convert diag 0x210 data to sense id information✨
diag_cmd_data_alloc(9)fills in a bde struct with dma buffers✨
diag_cmd_data_free(9)Frees an lpfc dma buffer extension✨
diag_ftp_2c4(9)DIAGNOSE X'2C4' service call✨
diag_ftp_cmd(9)executes a DIAG X'2C4' FTP command, targeting a HMC✨
diag_ftp_handler(9)FTP services IRQ handler✨
diag_ftp_shutdown(9)shutdown of FTP services, when running on z/VM✨
diag_ftp_startup(9)startup of FTP services, when running on z/VM✨
diag_trigger_event_show(9)show the diag_trigger_event attribute✨
diag_trigger_event_store(9)store the diag_trigger_event attribute✨
diag_trigger_master_show(9)show the diag_trigger_master attribute✨
diag_trigger_master_store(9)store the diag_trigger_master attribute✨
diag_trigger_mpi_show(9)show the diag_trigger_mpi attribute✨
diag_trigger_mpi_store(9)store the diag_trigger_mpi attribute✨
diag_trigger_scsi_show(9)show the diag_trigger_scsi attribute✨
diag_trigger_scsi_store(9)store the diag_trigger_scsi attribute✨
dibs_dev_add(9)register with dibs layer and all clients✨
dibs_dev_alloc(9)allocate and reference device structure✨
dibs_dev_del(9)unregister from dibs layer and all clients✨
dibs_register_client(9)register a client with dibs layer✨
dibs_unregister_client(9)unregister a client with dibs layer✨
die_collect_global_vars(9)Save all global variables✨
die_collect_vars(9)Save all variables and parameters✨
die_compare_name(9)Compare diename and tname✨
die_deref_ptr_type(9)Return type info for pointer access✨
die_entrypc(9)Returns entry PC (the lowest address) of a DIE✨
die_find_child(9)Generic DIE search function in DIE tree✨
die_find_func_rettype(9)Search a return type of function✨
die_find_inlinefunc(9)Search an inlined function at given address✨
die_find_member(9)Find a given name member in a data structure✨
die_find_realfunc(9)Search a non-inlined function at given address✨
die_find_tailfunc(9)Search for a non-inlined function with tail call at given address✨
die_find_top_inlinefunc(9)Search the top inlined function at given address✨
die_find_variable_at(9)Find a given name variable at given address✨
die_find_variable_by_addr(9)Find variable located at given address✨
die_find_variable_by_reg(9)Find a variable saved in a register✨
die_get_call_file(9)Get callsite file name of inlined function instance✨
die_get_call_lineno(9)Get callsite line number of inline-function instance✨
die_get_cfa(9)Get frame base information✨
die_get_data_member_location(9)Get the data-member offset✨
die_get_decl_file(9)Find the declared file name of this DIE✨
die_get_linkage_name(9)Get the linkage name of the object✨
die_get_member_type(9)Return type info of struct member✨
die_get_pointer_type(9)Get a pointer/array type die✨
die_get_real_type(9)Get a type die, but skip qualifiers and typedef✨
die_get_scopes(9)Return a list of scopes including the address✨
die_get_type(9)Get type DIE✨
die_get_typename(9)Get the name of given variable DIE✨
die_get_typename_from_type(9)Get the name of given type DIE✨
die_get_var_innermost_scope(9)Get innermost scope range of given variable DIE✨
die_get_var_range(9)Get byte offset range of given variable DIE✨
die_get_varname(9)Get the name and type of given variable DIE✨
die_is_func_def(9)Ensure that this DIE is a subprogram and definition✨
die_is_func_instance(9)Ensure that this DIE is an instance of a subprogram✨
die_is_signed_type(9)Check whether a type DIE is signed or not✨
die_match_name(9)Match diename/linkage name and glob✨
die_walk_instances(9)Walk on instances of given DIE✨
die_walk_lines(9)Walk on lines inside given DIE✨
diff_by_scaled_ppm(9)Calculate difference using scaled ppm✨
digital_start_poll(9)start_poll operation✨
digsig_verify(9)digital signature verification with public key✨
dim2_ahb_isr(9)interrupt service routine✨
dim2_remove(9)dim2 remove handler✨
dim_calc_stats(9)calculate the difference between two samples✨
dim_on_top(9)check if current state is a good place to stop (top location)✨
dim_park_on_top(9)enter a parking state on a top location✨
dim_park_tired(9)enter a tired parking state✨
dim_turn(9)change profile altering direction✨
dim_update_sample(9)set a sample's fields with given values✨
dim_update_sample_with_comps(9)set a sample's fields with given values including the completion parameter✨
dimcb_on_error(9)callback from HAL to report miscommunication between HDM and HAL✨
dio_bus_match(9)Tell if a DIO device structure has a matching DIO device id structure✨
dio_match_device(9)Tell if a DIO device structure has a matching DIO device id structure✨
dio_register_driver(9)register a new DIO driver✨
dio_unregister_driver(9)unregister a DIO driver✨
dir_double_exhash(9)Double size of ExHash table✨
dir_e_read(9)Reads the entries from a directory into a filldir buffer✨
dir_make_exhash(9)Convert a stuffed directory into an ExHash directory✨
dir_new_leaf(9)Add a new leaf onto hash chain✨
dir_split_leaf(9)Split a leaf block into two✨
direction_for_rotation(9)Get the correct reading direction for a given rotation✨
dirent_del(9)Delete a dirent✨
dirent_next(9)Next dirent✨
dirty_all_reference_blocks(9)Mark all reference count blocks in a slab as dirty.✨
dirty_block(9)Mark a reference count block as dirty, potentially adding it to the dirty queue if it wasn't already dirty.✨
dirty_cow_bottom_up(9)dirty a znode and its ancestors.✨
dirty_cow_nnode(9)ensure a nnode is not being committed.✨
dirty_cow_pnode(9)ensure a pnode is not being committed.✨
dirty_cow_znode(9)ensure a znode is not being committed.✨
disable_all_interrupts(9)Disable all interrupts of this I2c Bus✨
disable_audio_stream(9)disable usb snd endpoints✨
disable_clock(9)Disable a device clock.✨
disable_cmf(9)switch off the channel measurement for a specific device✨
disable_context_analysis(9)disables context analysis✨
disable_cu (charp)(9)✨
disable_delayed_work(9)Disable and cancel a delayed work item✨
disable_delayed_work_sync(9)Disable, cancel and drain a delayed work item✨
disable_ecrc_checking(9)disable PCIe ECRC checking for a device✨
disable_fprobe(9)Disable fprobe✨
disable_hardirq(9)disables an irq and waits for hardirq completion✨
disable_interrupts(9)disable the interrupts✨
disable_ioapic_support(9)disables ioapic support at runtime✨
disable_irq(9)disable an irq and wait for completion✨
disable_irq_nosync(9)disable an irq without waiting✨
disable_local_APIC(9)clear and disable the local APIC✨
disable_msix(9)disable the msix✨
disable_nmi_nosync(9)disable an nmi without waiting✨
disable_rpm_wakeref_asserts(9)disable the RPM assert checks✨
disable_slot(9)disable a slot✨
disable_work(9)Disable and cancel a work item✨
disable_work_sync(9)Disable, cancel and drain a work item✨
disallow_subvp_in_active_plus_blank(9)Function to determine disallowed subvp + drr/vblank configs✨
disassociate_ctty(9)disconnect controlling tty✨
disc_dupl_alert(9)issue node address duplication alert✨
discard_a_page(9)Begin the process of discarding a page.✨
discard_page_if_needed(9)Helper used to trigger a discard if the cache needs another free page.✨
disconnect_bsp_APIC(9)detach the APIC from the interrupt system✨
discovery (int)(9)✨
disk_alloc_independent_access_ranges(9)Allocate an independent access ranges data structure✨
disk_block_events(9)block and flush disk event checking✨
disk_check_media_change(9)check if a removable media has been changed✨
disk_clear_events(9)synchronously check, clear and return pending events✨
disk_flush_events(9)schedule immediate event checking and flushing✨
disk_force_media_change(9)force a media change event✨
disk_has_partscan(9)return %true if partition scanning is enabled on a disk✨
disk_openers(9)returns how many openers are there for a disk✨
disk_register_independent_access_ranges(9)register with sysfs a set of independent access ranges✨
disk_release(9)releases all allocated resources of the gendisk✨
disk_report_zone(9)Report one zone✨
disk_set_independent_access_ranges(9)Set a disk independent access ranges✨
disk_unblock_events(9)unblock disk event checking✨
disk_zone_capacity(9)returns the zone capacity of zone containing @sector✨
disp_priority (int)(9)✨
dispatch_to_local_dsq(9)Dispatch a task to a local dsq✨
display driver integration(9)✨
Display PLLs(9)✨
Display Refresh Rate Switching (DRRS)(9)✨
DisplayPort link capabilities(9)✨
DisplayPort link training(9)✨
distribute_page_over_waitq(9)Complete a waitq of VDO page completions with a page result.✨
div64_s64(9)signed 64bit divide with 64bit divisor✨
div64_s64_precise(9)wrapper for div64_s64()✨
div64_s64_rem(9)signed 64bit divide with 64bit divisor and remainder✨
div64_u64(9)unsigned 64bit divide with 64bit divisor✨
div64_u64_rem(9)unsigned 64bit divide with 64bit divisor and remainder✨
DIV64_U64_ROUND_CLOSEST(9)unsigned 64bit divide with 64bit divisor rounded to nearest integer✨
DIV64_U64_ROUND_UP(9)unsigned 64bit divide with 64bit divisor rounded up✨
div_frac(9)divide two fixed-point numbers✨
div_func(9)Emulate a DIV instruction✨
div_q(9)Performs fixed-point division.✨
DIV_ROUND_UP_POW2(9)divide and round up✨
div_s64(9)signed 64bit divide with 32bit divisor✨
div_s64_rem(9)signed 64bit divide with 32bit divisor with remainder✨
DIV_S64_ROUND_CLOSEST(9)signed 64bit divide with 32bit divisor rounded to nearest integer✨
div_u64(9)unsigned 64bit divide with 32bit divisor✨
div_u64_rem(9)unsigned 64bit divide with 32bit divisor with remainder✨
DIV_U64_ROUND_CLOSEST(9)unsigned 64bit divide with 32bit divisor rounded to nearest integer✨
DIV_U64_ROUND_UP(9)unsigned 64bit divide with 32bit divisor rounded up✨
divu_func(9)Emulate a DIVU instruction✨
divvy_up_power(9)divvy the allocated power between the actors✨
dln2_transfer(9)issue a DLN2 command and wait for a response and the associated data✨
dln2_transfer_rx(9)variant of @dln2_transfer() where TX buffer is not needed✨
dln2_transfer_tx(9)variant of @dln2_transfer() where RX buffer is not needed✨
dln2_unregister_event_cb(9)unregister the callback function for an event✨
dlpar_add_slot(9)DLPAR add an I/O Slot✨
dlpar_remove_pci_slot(9)DLPAR remove a PCI I/O Slot✨
dlpar_remove_slot(9)DLPAR remove an I/O Slot✨
dlpar_remove_vio_slot(9)DLPAR remove a virtual I/O Slot✨
DM Lifecycle(9)✨
dm_arm_vblank_event_pre_programming(9)Prepare for programming✨
dm_bio_integrity_rewind(9)Rewind integrity vector✨
dm_bio_rewind(9)update ->bi_iter of @bio by rewinding @bytes.✨
dm_consult_userspace(9)✨
dm_copy_name_and_uuid(9)Copy mapped device name & uuid into supplied buffers✨
dm_crc_source_should_start_dprx(9)Should drm_dp_start_crc() be called?✨
dm_crc_source_should_stop_dprx(9)Should drm_dp_stop_crc() be called?✨