📦 linux-manual

82568 pages · page 236 of 413

O (continued)

optc2_set_gsl(9)Assign OTG to GSL groups, set one of the OTGs to be master & rest are slaves✨
optc301_set_drr(9)Program dynamic refresh rate registers m_OTGx_OTG_V_TOTAL_*.✨
optc32_enable_crtc(9)Enable CRTC - call ASIC Control Object to enable Timing generator.✨
optc35_get_crc(9)Capture CRC result per component✨
optc35_set_odm_combine(9)Enable CRTC - call ASIC Control Object to enable Timing generator.✨
optc3_set_timing_double_buffer(9)DRR double buffering control✨
optc401_enable_crtc(9)Enable CRTC✨
optee_disable_shm_cache(9)Disables caching of mapped shared memory allocations in OP-TEE✨
optee_disable_unmapped_shm_cache(9)Disables caching of shared memory allocations in OP-TEE which are not currently mapped✨
optee_enable_shm_cache(9)Enables caching of some shared memory allocation in OP-TEE✨
optee_ffa_do_call_with_arg(9)Do a FF-A call to enter OP-TEE in secure world✨
optee_ffa_from_msg_param(9)convert from OPTEE_MSG parameters to struct tee_param✨
optee_ffa_shm_pool_alloc_pages(9)create page-based allocator pool✨
optee_ffa_to_msg_param(9)convert from struct tee_params to OPTEE_MSG parameters✨
optee_fill_pages_list(9)write list of user pages to given shared buffer.✨
optee_free_msg_arg(9)Free previsouly obtained shared memory✨
optee_from_msg_param(9)convert from OPTEE_MSG parameters to struct tee_param✨
optee_get_msg_arg(9)Provide shared memory for argument struct✨
optee_handle_rpc(9)handle RPC from secure world✨
OPTEE_MSG_GET_ARG_SIZE(9)return size of struct optee_msg_arg✨
optee_shm_pool_alloc_pages(9)create page-based allocator pool✨
optee_smc_do_call_with_arg(9)Do an SMC to OP-TEE in secure world✨
optee_supp_recv(9)receive request for supplicant✨
optee_supp_send(9)send result of request from supplicant✨
optee_supp_thrd_req(9)request service from supplicant✨
optee_to_msg_param(9)convert from struct tee_params to OPTEE_MSG parameters✨
opti_pre_reset(9)probe begin✨
opti_set_piomode(9)set initial PIO mode data✨
opti_write_reg(9)control register setup✨
optidma_lock(9)issue temporary relock✨
optidma_make_bits43(9)PCI setup helper✨
optidma_mode_setup(9)set mode data✨
optidma_pre_reset(9)probe begin✨
optidma_set_dma_mode(9)DMA setup callback✨
optidma_set_mode(9)mode setup✨
optidma_set_pio_mode(9)PIO setup callback✨
optidma_unlock(9)unlock control registers✨
optiplus_mode_setup(9)DMA setup for Firestar Plus✨
optiplus_set_dma_mode(9)DMA setup callback✨
optiplus_set_pio_mode(9)PIO setup callback✨
optiplus_with_udma(9)Look for UDMA capable setup✨
or1k_early_setup(9)✨
orc_alloc_scb(9)allocate an SCB✨
orc_device_reset(9)device reset handler✨
orc_exec_scb(9)Queue an SCB with the HA✨
orc_interrupt(9)IRQ processing✨
orc_load_firmware(9)initialise firmware✨
orc_release_scb(9)release an SCB✨
orc_reset_scsi_bus(9)perform bus reset✨
order_base_2(9)calculate the (rounded up) base 2 order of the argument✨
orderly_poweroff(9)Trigger an orderly system poweroff✨
orderly_reboot(9)Trigger an orderly system reboot✨
os_area_get_property(9)Get a saved_params value from the device tree.✨
os_area_queue_work_handler(9)Asynchronous write handler.✨
os_area_set_property(9)Add or overwrite a saved_params value to the device tree.✨
os_idle_sleep(9)sleep until interrupted✨
os_rcv_fd_msg(9)receive message with (optional) FDs✨
os_timer_create(9)create an new posix (interval) timer✨
os_timer_disable(9)disable the posix (interval) timer✨
osd_req_op_extent_osd_iter(9)Set up an operation with an iterator buffer✨
osintfc_mrioc_security_status(9)Check controller secure status✨
osnoise_options_write(9)Write function for "options" entry✨
other_cnt_show(9)other io count - this is the number of I/O requests other than read and write requests. Typically these are tape movement requests but will include driver tape movement. This includes only requests…✨
out_of_memory(9)kill the "best" process when we run out of memory✨
outer_clean_range(9)clean dirty outer cache lines✨
outer_disable(9)clean, invalidate and disable the outer cache✨
outer_flush_all(9)clean and invalidate all cache lines in the outer cache✨
outer_flush_range(9)clean and invalidate outer cache lines✨
outer_inv_range(9)invalidate range of outer cache lines✨
outer_resume(9)restore the cache configuration and re-enable outer cache✨
output probing helper overview(9)✨
ov9282_detect(9)Detect ov9282 sensor✨
ov9282_enum_frame_size(9)Enumerate V4L2 sub-device frame sizes✨
ov9282_fill_pad_format(9)Fill subdevice pad format from selected sensor mode✨
ov9282_init_controls(9)Initialize sensor subdevice controls✨
ov9282_parse_hw_config(9)Parse HW configuration and check if supported✨
ov9282_update_controls(9)Update control ranges based on streaming mode✨
ov9282_update_exp_gain(9)Set updated exposure and gain✨
overflows_flex_counter_type(9)Check if the counter associated with the given flexible array member can represent a value.✨
overflows_type(9)helper for checking the overflows between value, variables, or data type✨
overlay_adjust_local_conflicting_phandle(9)Changes a phandle value✨
overlay_adjust_local_phandles(9)Adjust the phandles of a whole overlay✨
overlay_adjust_node_phandles(9)Offsets the phandles of a node✨
overlay_apply_node(9)Merges a node into the base device tree✨
overlay_fixup_one_phandle(9)Set an overlay phandle to the base one✨
overlay_fixup_phandle(9)Set an overlay phandle to the base one✨
overlay_fixup_phandles(9)Resolve the overlay phandles to the base device tree✨
overlay_get_target_phandle(9)retrieves the target phandle of a fragment✨
overlay_merge(9)Merge an overlay into its base device tree✨
overlay_phandle_add_offset(9)Increases a phandle by an offset✨
overlay_prevent_phandle_overwrite(9)Fixes overlay phandles to not overwrite base phandles✨
overlay_prevent_phandle_overwrite_node(9)Helper function for overlay_prevent_phandle_overwrite✨
overlay_symbol_update(9)Update the symbols of base tree after a merge✨
overlay_update_local_conflicting_references(9)Recursively replace phandle values✨
overlay_update_local_node_references(9)Adjust the overlay references✨
overlay_update_local_references(9)Adjust the overlay references✨
overlay_update_node_conflicting_references(9)Recursively replace phandle values✨
Overview(9)✨
overview(9)✨
overview and lifetime rules(9)✨
ovl_lookup_real_one(9)Lookup a child overlay dentry to get an overlay dentry whose real dentry is given✨
ovl_show_options(9)✨
ovl_statfs(9)✨
ovpn_aead_crypto_req_sg(9)locate the scatterlist following the AEAD request within a temporary buffer allocated using ovpn_aead_crypto_tmp_size✨
ovpn_aead_crypto_tmp_iv(9)retrieve the pointer to the IV within a temporary buffer allocated using ovpn_aead_crypto_tmp_size✨
ovpn_aead_crypto_tmp_req(9)retrieve the pointer to the AEAD request structure within a temporary buffer allocated using ovpn_aead_crypto_tmp_size✨
ovpn_aead_crypto_tmp_size(9)compute the size of a temporary object containing an AEAD request structure with extra space for SG and IV.✨
ovpn_bind_from_sockaddr(9)retrieve binding matching sockaddr✨
ovpn_bind_reset(9)assign new binding to peer✨
ovpn_bind_skb_src_match(9)match packet source with binding✨
ovpn_crypto_config_get(9)populate keyconf object with non-sensible key data✨
ovpn_dev_is_valid(9)check if the netdevice is of type 'ovpn'✨
ovpn_dst_cache_check_key(9)reset peer dst cache after key changes✨
ovpn_dst_cache_current(9)check whether a route lookup matches peer state✨
ovpn_get_dev_from_attrs(9)retrieve the ovpn private data from the netdevice a netlink message is targeting✨
ovpn_is_keepalive(9)check if skb contains a keepalive message✨
ovpn_key_id_from_skb(9)extract key ID from the skb head✨
ovpn_nexthop_from_rt4(9)look up the IPv4 nexthop for the given destination✨
ovpn_nexthop_from_rt6(9)look up the IPv6 nexthop for the given destination✨
ovpn_nexthop_from_skb4(9)retrieve IPv4 nexthop for outgoing skb✨
ovpn_nexthop_from_skb6(9)retrieve IPv6 nexthop for outgoing skb✨
ovpn_nl_key_new_doit(9)configure a new key for the specified peer✨
ovpn_nl_key_swap_notify(9)notify userspace peer's key must be renewed✨
ovpn_nl_peer_del_notify(9)notify userspace about peer being deleted✨
ovpn_nl_peer_float_notify(9)notify userspace about peer floating✨
ovpn_nl_peer_modify(9)modify the peer attributes according to the incoming msg✨
ovpn_nl_register(9)perform any needed registration in the NL subsustem✨
ovpn_nl_unregister(9)undo any module wide netlink registration✨
ovpn_opcode_compose(9)combine OP code, key ID and peer ID to wire format✨
ovpn_opcode_from_skb(9)extract OP code from skb at specified offset✨
ovpn_peer_add(9)add peer to the related tables✨
ovpn_peer_add_mp(9)add peer to related tables in a MP instance✨
ovpn_peer_add_p2p(9)add peer to related tables in a P2P instance✨
ovpn_peer_check_by_src(9)check that skb source is routed via peer✨
ovpn_peer_del(9)delete peer from related tables✨
ovpn_peer_del_mp(9)delete peer from related tables in a MP instance✨
ovpn_peer_del_p2p(9)delete peer from related tables in a P2P instance✨
ovpn_peer_endpoints_update(9)update remote or local endpoint for peer✨
ovpn_peer_get_by_dst(9)Lookup peer to send skb to✨
ovpn_peer_get_by_id(9)retrieve peer by ID✨
ovpn_peer_get_by_id_p2p(9)get peer by ID in a P2P instance✨
ovpn_peer_get_by_transp_addr(9)retrieve peer by transport address✨
ovpn_peer_get_by_transp_addr_p2p(9)get peer by transport address in a P2P instance✨
ovpn_peer_get_by_vpn_addr4(9)retrieve peer by its VPN IPv4 address✨
ovpn_peer_get_by_vpn_addr6(9)retrieve peer by its VPN IPv6 address✨
ovpn_peer_hold(9)increase reference counter✨
ovpn_peer_id_from_skb(9)extract peer ID from skb at specified offset✨
ovpn_peer_keepalive_send(9)periodic worker sending keepalive packets✨
ovpn_peer_keepalive_set(9)configure keepalive values for peer✨
ovpn_peer_keepalive_work(9)run keepalive logic on each known peer✨
ovpn_peer_new(9)allocate and initialize a new peer object✨
ovpn_peer_put(9)decrease reference counter✨
ovpn_peer_release(9)release peer private members✨
ovpn_peer_release_kref(9)callback for kref_put✨
ovpn_peer_release_p2p(9)release peer upon P2P device teardown✨
ovpn_peer_release_rcu(9)RCU callback performing last peer release steps✨
ovpn_peer_reset_sockaddr(9)recreate binding for peer✨
ovpn_peer_skb_to_sockaddr(9)fill sockaddr with skb source address✨
ovpn_peer_transp_match(9)check if sockaddr and peer binding match✨
ovpn_peer_vpn_addr_conflict4(9)check if the VPN v4 address is already in use✨
ovpn_peer_vpn_addr_conflict6(9)check if the VPN v6 address is already in use✨
ovpn_peers_free(9)free all peers in the instance✨
ovpn_socket_new(9)create a new socket and initialize it✨
ovpn_socket_put(9)decrease reference counter✨
ovpn_socket_release(9)release resources owned by socket user✨
ovpn_udp4_output(9)send IPv4 packet over udp socket✨
ovpn_udp6_output(9)send IPv6 packet over udp socket✨
ovpn_udp_encap_recv(9)Start processing a received UDP packet.✨
ovpn_udp_output(9)transmit skb using udp-tunnel✨
ovpn_udp_send_skb(9)prepare skb and send it over via UDP✨
ovpn_udp_socket_attach(9)set udp-tunnel CBs on socket and link it to ovpn✨
ovpn_udp_socket_detach(9)clean udp-tunnel status for this socket✨
ovpn_xmit_special(9)encrypt and transmit an out-of-band message to peer✨
ovs_nla_get_flow_metadata(9)parses Netlink attributes into a flow key.✨
ovs_nla_get_match(9)parses Netlink attributes into a flow key and mask. In case the 'mask' is NULL, the flow is treated as exact match flow. Otherwise, it is treated as a wildcarded flow, except the mask does not…✨
ovs_vport_add(9)add vport device (for kernel callers)✨
ovs_vport_alloc(9)allocate and initialize new vport✨
ovs_vport_del(9)delete existing vport device✨
ovs_vport_exit(9)shutdown vport subsystem✨
ovs_vport_find_upcall_portid(9)find the upcall portid to send upcall.✨
ovs_vport_free(9)uninitialize and free vport✨
ovs_vport_get_stats(9)retrieve device stats✨
ovs_vport_get_upcall_portids(9)get the upcall_portids of @vport.✨
ovs_vport_get_upcall_stats(9)retrieve upcall stats✨
ovs_vport_init(9)initialize vport subsystem✨
ovs_vport_locate(9)find a port that has already been created✨
ovs_vport_receive(9)pass up received packet to the datapath for processing✨
ovs_vport_set_upcall_portids(9)set upcall portids of @vport.✨
OWE DH IE handling offload(9)✨
Ownership(9)✨
Ownership transfer(9)✨

P

p1022_ds_exit(9)machine driver exit✨
p1022_ds_init(9)machine driver initialization.✨
p1022_ds_machine_probe(9)initialize the board✨
p1022_ds_machine_remove(9)Remove the sound device✨
p1022_ds_probe(9)platform probe function for the machine driver✨
p1022_ds_remove(9)remove the platform device✨
p1022_ds_startup(9)program the board with various hardware parameters✨
p1022_rdk_exit(9)machine driver exit✨
p1022_rdk_init(9)machine driver initialization.✨