📦 linux-manual

82568 pages · page 105 of 413

E (continued)

explicit fencing properties(9)✨
export_dmabuf_from_addr(9)export a dma-buf object for the given memory address and size.✨
exportfs_cannot_lock(9)check if export implements file locking✨
exportfs_encode_fh(9)encode a file handle from dentry✨
exportfs_encode_ino64_fid(9)encode non-decodeable 64bit ino file id✨
exportfs_encode_inode_fh(9)encode a file handle from inode✨
Exposing MMIO regions to userspace(9)✨
expr_calc_value(9)return the tristate value of the given expression✨
expr_invalidate_all(9)invalidate all cached expression values✨
expr_lookup(9)return the expression with the given type and sub-nodes This looks up an expression with the specified type and sub-nodes. If such an expression is found in the hash table, it is returned…✨
ext2_alloc_blocks(9)Allocate multiple blocks needed for a branch.✨
ext2_alloc_branch(9)allocate and set up a chain of blocks.✨
ext2_bg_has_super(9)number of blocks used by the superblock in group✨
ext2_bg_num_gdb(9)number of blocks used by the group table in group✨
ext2_blks_to_allocate(9)Look up the block map and count the number of direct blocks need to be allocated for the given branch.✨
ext2_block_to_path(9)parse the block number into array of offsets✨
ext2_discard_reservation(9)✨
ext2_find_goal(9)find a preferred place for allocation.✨
ext2_find_near(9)find a place for allocation with sufficient locality✨
ext2_find_shared(9)find the indirect blocks for partial truncation.✨
ext2_free_blocks(9)- Free given blocks and update quota and i_blocks✨
ext2_free_branches(9)free an array of branches✨
ext2_free_data(9)free a list of data blocks✨
ext2_get_branch(9)read the chain of indirect blocks leading to data✨
ext2_has_free_blocks(9)✨
ext2_init_block_alloc_info(9)✨
ext2_splice_branch(9)splice the allocated branch onto inode.✨
ext2_try_to_allocate(9)✨
ext2_try_to_allocate_with_rsv(9)✨
ext4_alloc_branch(9)allocate and set up a chain of blocks✨
ext4_bg_has_super(9)number of blocks used by the superblock in group✨
ext4_bg_num_gdb(9)number of blocks used by the group table in group✨
ext4_blks_to_allocate(9)Look up the block map and count the number of direct blocks need to be allocated for the given branch.✨
ext4_block_to_path(9)parse the block number into array of offsets✨
ext4_count_free_clusters(9)- count filesystem free clusters✨
ext4_double_down_write_data_sem(9)write lock two inodes's i_data_sem✨
ext4_double_up_write_data_sem(9)Release two inodes' write lock of i_data_sem✨
ext4_find_goal(9)find a preferred place for allocation.✨
ext4_find_near(9)find a place for allocation with sufficient locality✨
ext4_find_shared(9)find the indirect blocks for partial truncation.✨
ext4_free_blocks(9)- Free given blocks and update quota✨
ext4_free_branches(9)free an array of branches✨
ext4_free_data(9)free a list of data blocks✨
ext4_get_branch(9)read the chain of indirect blocks leading to data✨
ext4_get_group_desc(9)- load group descriptor from disk✨
ext4_get_stripe_size(9)Get the stripe size.✨
ext4_group_add_blocks(9)- Add given blocks to an existing group✨
ext4_has_free_clusters(9)✨
ext4_ind_remove_space(9)remove space from the range✨
ext4_inode_to_goal_block(9)return a hint for block allocation✨
ext4_mb_clear_bb(9)- helper function for freeing blocks. Used by ext4_free_blocks()✨
ext4_move_extents(9)Exchange the specified range of a file✨
ext4_read_block_bitmap_nowait(9)✨
ext4_should_retry_alloc(9)check if a block allocation should be retried✨
ext4_splice_branch(9)splice the allocated branch onto inode.✨
ext4_swap_extents(9)Swap extents between two inodes✨
ext4_trim_all_free(9)- function to trim all free space in alloc. group✨
ext4_trim_extent(9)- function to TRIM one single free extent in the group✨
ext4_trim_fs(9)- trim ioctl handle function✨
ext_tree_encode_commit(9)encode as much as possible extents into the buffer✨
ext_tree_prepare_commit(9)encode extents that need to be committed✨
ext_tree_try_encode_commit(9)try to encode all extents into the buffer✨
extcon_alloc_cables(9)alloc the cables for extcon device✨
extcon_alloc_groups(9)alloc the groups for extcon device✨
extcon_alloc_muex(9)alloc the mutual exclusive for extcon device✨
extcon_dev_register(9)Register an new extcon device✨
extcon_dev_unregister(9)Unregister the extcon device.✨
extcon_get_edev_name(9)Get the name of the extcon device.✨
extcon_get_extcon_dev(9)Get the extcon device instance from the name.✨
extcon_get_property(9)Get the property value of an external connector.✨
extcon_get_property_capability(9)Get the capability of the property for an external connector.✨
extcon_get_state(9)Get the state of an external connector.✨
extcon_register_notifier(9)Register a notifier block to get notified by any state changes from the extcon.✨
extcon_register_notifier_all(9)Register a notifier block for all connectors.✨
extcon_set_property(9)Set the property value of an external connector.✨
extcon_set_property_capability(9)Set the capability of the property for an external connector.✨
extcon_set_property_sync(9)Set property of an external connector with sync.✨
extcon_set_state(9)Set the state of an external connector.✨
extcon_set_state_sync(9)Set the state of an external connector with sync.✨
extcon_sync(9)Synchronize the state for an external connector.✨
extcon_unregister_notifier(9)Unregister a notifier block from the extcon.✨
extcon_unregister_notifier_all(9)Unregister a notifier block from extcon.✨
Extensibility(9)✨
extract_iter_to_sg(9)Extract pages from an iterator and add to an sglist✨
extract_new_mappings(9)Find all valid new mappings to be applied to the block map.✨
extract_u32_until_given_char(9)given a string of the format "<u32><char>*", extract the u32.✨
exynos4_read_count_32(9)Read the lower 32-bits of the global counter✨
exynos4_read_count_64(9)Read all 64-bits of the global counter✨
exynos4_timer_interrupts(9)initialize MCT interrupts✨
exynos5_counters_get(9)Gets the performance counters values.✨
exynos5_dmc_align_bypass_dram_timings(9)Chooses and sets DRAM timings✨
exynos5_dmc_align_bypass_voltage(9)Sets the voltage for the DMC✨
exynos5_dmc_align_init_freq(9)Align initial frequency value✨
exynos5_dmc_align_target_voltage(9)Sets the final voltage for the DMC✨
exynos5_dmc_change_freq_and_volt(9)Changes voltage and frequency of the DMC using safe procedure✨
exynos5_dmc_disable_perf_events(9)Disable performance events✨
exynos5_dmc_enable_perf_events(9)Enable performance events✨
exynos5_dmc_get_cur_freq(9)Function returns current DMC frequency✨
exynos5_dmc_get_status(9)Read current DMC performance statistics.✨
exynos5_dmc_get_volt_freq(9)Gets the frequency and voltage from the OPP table.✨
exynos5_dmc_init_clks(9)Initialize clocks needed for DMC operation.✨
exynos5_dmc_perf_events_calc(9)Calculate utilization✨
exynos5_dmc_perf_events_check(9)Checks the status of the counters✨
exynos5_dmc_probe(9)Probe function for the DMC driver✨
exynos5_dmc_remove(9)Remove function for the platform device✨
exynos5_dmc_set_pause_on_switching(9)Controls a pause feature in DMC✨
exynos5_dmc_start_perf_events(9)Setup and start performance event counters✨
exynos5_dmc_switch_to_bypass_configuration(9)Switching to temporary clock✨
exynos5_dmc_target(9)Function responsible for changing frequency of DMC✨
exynos5_dram_change_timings(9)Low-level changes of the DRAM final timings✨
exynos5_init_freq_table(9)Initialized PM OPP framework✨
exynos5_performance_counters_init(9)Initializes performance DMC's counters✨
exynos5_set_bypass_dram_timings(9)Low-level changes of the DRAM timings✨
exynos5_switch_timing_regs(9)Changes bank register set for DRAM timings✨
exynos_arm64_enable_bus_clk(9)Enable parent clock of specified CMU✨
exynos_arm64_init_clocks(9)Set clocks initial configuration✨
exynos_arm64_register_cmu(9)Register specified Exynos CMU domain✨
exynos_arm64_register_cmu_pm(9)Register Exynos CMU domain with PM support✨
exynos_cluster_power_down(9)power down the specified cluster✨
exynos_cluster_power_state(9)returns the power state of the cluster✨
exynos_cluster_power_up(9)power up the specified cluster✨
exynos_cpu_power_down(9)power down the specified cpu✨
exynos_cpu_power_state(9)returns the power state of the cpu✨
exynos_cpu_power_up(9)power up the specified cpu✨
exynos_drm_ipp_commit_ioctl(9)perform image processing operation✨
exynos_drm_ipp_get_caps_ioctl(9)get ipp module capabilities and formats✨
exynos_drm_ipp_get_limits_ioctl(9)get ipp module limits✨
exynos_drm_ipp_get_res_ioctl(9)enumerate all ipp modules✨
exynos_drm_ipp_register(9)Register a new picture processor hardware module✨
exynos_drm_ipp_task_done(9)finish given task and set return code✨
exynos_drm_ipp_unregister(9)Unregister the picture processor module✨
exynos_get_pmu_regmap(9)Obtain pmureg regmap✨
exynos_get_pmu_regmap_by_phandle(9)Obtain pmureg regmap via phandle✨
exynos_scu_enable(9)enables SCU for Cortex-A9 based system✨
exynos_usi_enable(9)Initialize USI block✨
exynos_usi_set_sw_conf(9)Set USI block configuration mode✨
ezport_flash(9)flash device firmware✨

F

f2fs_issue_discard_timeout(9)Issue all discard cmd within UMOUNT_DISCARD_TIMEOUT✨
f_extend(9)Convert PDC addresses to kernel addresses.✨
Factors for calculation of lux(9)✨
fadump_calculate_reserve_size(9)reserve variable boot area 5% of System RAM✨
failover_register(9)Register a failover instance✨
failover_slave_register(9)Register a slave netdev✨
failover_slave_unregister(9)Unregister a slave netdev✨
failover_unregister(9)Unregister a failover instance✨
fair_share_throttle(9)throttles devices associated with the given zone✨
fallible_matches_name(9)determine if a dent matches a given name.✨
fallible_read_node(9)try to read a leaf node.✨
fallible_resolve_collision(9)resolve a collision even if nodes are missing.✨
fan_curve(9)✨
fan_minimum_pwm(9)✨
fan_target_temperature(9)✨
fan_zero_rpm_enable(9)✨
fan_zero_rpm_stop_temperature(9)✨
Faraday TV Encoder TVE200 DRM Driver(9)✨
fas216_add(9)initialise FAS/NCR/AMD SCSI ic.✨
fas216_busservice_intr(9)handle bus service interrupt from FAS216 chip✨
fas216_cleanuptransfer(9)clean up after a transfer has completed.✨
fas216_done(9)complete processing for current command✨
fas216_eh_abort(9)abort this command✨
fas216_eh_bus_reset(9)Reset the bus associated with the command✨
fas216_eh_device_reset(9)Reset the device associated with this command✨
fas216_eh_host_reset(9)Reset the host associated with this command✨
fas216_funcdone_intr(9)handle a function done interrupt from FAS216 chip✨
fas216_get_last_msg(9)retrive last message from the list✨
fas216_handlesync(9)Handle a synchronous transfer message✨
fas216_init(9)initialise FAS/NCR/AMD SCSI structures.✨
fas216_init_chip(9)Initialise FAS216 state after reset✨
fas216_internal_done(9)trigger restart of a waiting thread in fas216_noqueue_command✨
fas216_intr(9)handle interrupts to progress a command✨
fas216_kick(9)kick a command to the interface✨
fas216_message(9)handle a function done interrupt from FAS216 chip✨
fas216_pio(9)transfer data off of/on to card using programmed IO✨
fas216_queue_command_internal(9)queue a command for the adapter to process✨
fas216_release(9)release all resources for FAS/NCR/AMD SCSI ic.✨
fas216_reselected_intr(9)start reconnection of a device✨
fas216_reset_state(9)Initialise driver internal state✨
fas216_rq_sns_done(9)Finish processing automatic request sense command✨
fas216_send_command(9)send command after all message bytes have been sent✨
fas216_send_messageout(9)handle bus service to send a message✨
fas216_set_sync(9)setup FAS216 chip for specified transfer period.✨
fas216_std_done(9)finish processing of standard command✨
fas216_stoptransfer(9)Stop a DMA transfer onto / off of the card✨
fas216_syncperiod(9)calculate STP register value✨
fas216_transfer(9)Perform a DMA/PIO transfer off of/on to card✨
fas216_updateptrs(9)update data pointers after transfer suspended/paused✨
fast_fail_rsp(9)- Handle response to MAD enable fast fail✨
fast_to_acquire(9)determine if a resource group will be fast to acquire✨
fastpath_timer_check(9)POSIX CPU timers fast path.✨
FASTRPC_POLL_MODE(9)Enable/disable poll mode for FastRPC invocations✨
fat_parse_long(9)Parse extended directory entry.✨
fat_parse_short(9)Parse MS-DOS (short) directory entry.✨
fault_flag_allow_retry_first(9)check ALLOW_RETRY the first time✨
fault_in_readable(9)fault in userspace address range for reading✨
fault_in_subpage_writeable(9)fault in an address range for writing✨
fault_in_user_writeable(9)Fault in user address and verify RW access✨
fault_in_writeable(9)fault in userspace address range for writing✨
faux_device_create(9)create and register with the driver core a faux device✨
faux_device_create_with_groups(9)Create and register with the driver core a faux device and populate the device with an initial set of sysfs attributes.✨
faux_device_destroy(9)destroy a faux device✨