📦 linux-manual

82568 pages · page 28 of 413

A (continued)

audit_log_n_hex(9)convert a buffer to hex and append it to the audit skb✨
audit_log_n_untrustedstring(9)log a string that may contain random characters✨
audit_log_path_denied(9)report a path restriction denial✨
audit_log_start(9)obtain an audit buffer✨
audit_log_subj_ctx(9)Add LSM subject information✨
audit_log_untrustedstring(9)log a string that may contain random characters✨
audit_log_uring(9)generate a AUDIT_URINGOP record✨
audit_policy(9)Audit a policy's name, version and thumbprint to @ab.✨
audit_pre(9)core AppArmor function.✨
audit_ptrace_mask(9)convert mask to permission string✨
audit_receive(9)receive messages from a netlink control socket✨
audit_reset_context(9)reset a audit_context structure✨
audit_resource(9)audit setting resource limit✨
audit_return_fixup(9)fixup the return codes in the audit_context✨
audit_rule(9)audit an IPE policy rule.✨
audit_rule_change(9)apply all rules to the specified message type✨
audit_seccomp(9)record information about a seccomp action✨
audit_send_reply(9)send an audit reply message via netlink✨
audit_serial(9)compute a serial number for the audit record✨
audit_set_loginuid(9)set current task's loginuid✨
audit_signal_cb(9)call back for signal specific audit fields✨
audit_signal_info(9)record signal info for shutting down audit subsystem✨
audit_signal_info_syscall(9)record signal info for syscalls✨
audit_signal_mask(9)convert mask to permission string✨
audit_string_contains_control(9)does a string need to be logged in hex✨
auditd_conn_free(9)RCU helper to release an auditd connection struct✨
auditd_pid_vnr(9)Return the auditd PID relative to the namespace✨
auditd_reset(9)Disconnect the auditd connection✨
auditd_send_unicast_skb(9)Send a record via unicast to auditd✨
auditd_set(9)Set/Reset the auditd connection state✨
auditd_test_task(9)Check to see if a given task is an audit daemon✨
auditsc_get_stamp(9)get local copies of audit_context values✨
auth_domain_cleanup(9)check that the auth_domain table is empty✨
authenticate_sleb(9)authenticate one scan LEB✨
Authenticated Encryption With Associated Data (AEAD) Cipher API(9)✨
auto_house_keeping(9)Automatically move rtla out of measurement threads✨
autoresize(9)re-size the volume which has the "auto-resize" flag set.✨
aux kms helpers(9)✨
auxiliary_device_create(9)create a device on the auxiliary bus✨
auxiliary_device_destroy(9)remove an auxiliary device✨
auxiliary_device_init(9)check auxiliary_device and initialize✨
auxiliary_device_sysfs_irq_add(9)add a sysfs entry for the given IRQ✨
auxiliary_device_sysfs_irq_remove(9)remove a sysfs entry for the given IRQ✨
auxiliary_driver_unregister(9)unregister a driver✨
auxtrace_record__init(9)Initialize an AUX area tracing record.✨
avail_orphs(9)calculate available space.✨
available_clocksource_show(9)sysfs interface for listing clocksource✨
available_idle_cpu(9)is a given CPU idle for enqueuing work.✨
avc_add_callback(9)Register a callback for security events.✨
avc_audit(9)Audit the granting or denial of permissions.✨
avc_audit_post_callback(9)SELinux specific information will be called by generic audit code✨
avc_audit_pre_callback(9)SELinux specific information will be called by generic audit code✨
avc_compute_av(9)Add an entry to the AVC based on the security policy✨
avc_flush(9)Flush the cache✨
avc_has_perm(9)Check permissions and perform any appropriate auditing.✨
avc_has_perm_noaudit(9)Check permissions but perform no auditing.✨
avc_init(9)Initialize the AVC.✨
avc_insert(9)Insert an AVC entry.✨
avc_lookup(9)Look up an AVC entry.✨
avc_perm_nonode(9)Add an entry to the AVC✨
avc_ss_reset(9)Flush the cache and revalidate migrated permissions.✨
avc_update_node(9)Update an AVC entry✨
avg_array(9)Return average of values within an array.✨
avivo_get_fb_ref_div(9)feedback and ref divider calculation✨
avivo_reduce_ratio(9)fractional number reduction✨
avivo_wait_for_vblank(9)vblank wait asic callback.✨
awcc_op_get_resource_id(9)Get the resource ID at a given index✨
ax_prepare_transfer_hardware(9)Prepares hardware for transfer.✨
ax_spi_chipselect(9)Select or deselect the chip select line✨
ax_spi_config_clock_freq(9)Sets clock frequency✨
ax_spi_config_clock_mode(9)Sets clock polarity and phase✨
ax_spi_detect_fifo_depth(9)Detect the FIFO depth of the hardware✨
ax_spi_fill_tx_fifo(9)Fills the TX FIFO with as many bytes as possible✨
ax_spi_get_rx_byte(9)Gets a byte from the RX FIFO buffer✨
ax_spi_get_rx_byte_for_irq(9)Gets a byte from the RX FIFO buffer✨
ax_spi_init_hw(9)Initialize the hardware and configure the SPI controller✨
ax_spi_irq(9)Interrupt service routine of the SPI controller✨
ax_spi_probe(9)Probe method for the SPI driver✨
ax_spi_process_rx_and_finalize(9)Process RX bytes and check for completion✨
ax_spi_read(9)Register Read - 32 bit per word✨
ax_spi_remove(9)Remove method for the SPI driver✨
ax_spi_resume(9)Resume method for the SPI driver✨
ax_spi_runtime_resume(9)Runtime resume method for the SPI driver✨
ax_spi_runtime_suspend(9)Runtime suspend method for the SPI driver✨
ax_spi_setup_transfer(9)Configure SPI controller for specified transfer✨
ax_spi_suspend(9)Suspend method for the SPI driver✨
ax_spi_write(9)Register write - 32 bit per word✨
ax_spi_write_b(9)Register Read - 8 bit per word✨
ax_transfer_one(9)Initiates the SPI transfer✨
ax_unprepare_transfer_hardware(9)Relaxes hardware after transfer✨
axienet_calc_cr(9)Calculate control register value✨
axienet_change_mtu(9)Driver change mtu routine.✨
axienet_check_tx_bd_space(9)Checks if a BD/group of BDs are currently busy✨
axienet_coalesce_params(9)Extract coalesce parameters from the CR✨
axienet_device_reset(9)Reset and initialize the Axi Ethernet hardware.✨
axienet_dim_coalesce_count_rx(9)RX coalesce count for DIM✨
axienet_dma_bd_init(9)Setup buffer descriptor rings for Axi DMA✨
axienet_dma_bd_release(9)Release buffer descriptor rings✨
axienet_dma_err_handler(9)Work queue task for Axi DMA Error✨
axienet_dma_in32(9)Memory mapped Axi DMA register read✨
axienet_dma_out32(9)Memory mapped Axi DMA register write.✨
axienet_dma_out64(9)Memory mapped Axi DMA register write.✨
axienet_dma_rx_cb(9)DMA engine callback for RX channel.✨
axienet_dma_start(9)Set up DMA registers and start DMA operation✨
axienet_dma_stop(9)Stop DMA operation✨
axienet_dma_tx_cb(9)DMA engine callback for TX channel.✨
axienet_eth_irq(9)Ethernet core Isr.✨
axienet_ethtools_get_coalesce(9)Get DMA interrupt coalescing count.✨
axienet_ethtools_get_drvinfo(9)Get various Axi Ethernet driver information.✨
axienet_ethtools_get_pauseparam(9)Get the pause parameter setting for Tx and Rx paths.✨
axienet_ethtools_get_regs(9)Dump the contents of all registers present in AxiEthernet core.✨
axienet_ethtools_get_regs_len(9)Get the total regs length present in the AxiEthernet core.✨
axienet_ethtools_set_coalesce(9)Set DMA interrupt coalescing count.✨
axienet_ethtools_set_pauseparam(9)Set device pause parameter(flow control) settings.✨
axienet_free_tx_chain(9)Clean up a series of linked TX descriptors.✨
axienet_init_dmaengine(9)init the dmaengine code.✨
axienet_init_legacy_dma(9)init the dma legacy code.✨
axienet_ior(9)Memory mapped Axi Ethernet register read✨
axienet_iow(9)Memory mapped Axi Ethernet register write✨
axienet_mdio_enable(9)MDIO hardware setup function✨
axienet_mdio_mdc_disable(9)MDIO MDC disable function✨
axienet_mdio_mdc_enable(9)MDIO MDC enable function✨
axienet_mdio_read(9)MDIO interface read function✨
axienet_mdio_setup(9)MDIO setup function✨
axienet_mdio_teardown(9)MDIO remove function✨
axienet_mdio_wait_until_ready(9)MDIO wait function✨
axienet_mdio_write(9)MDIO interface write function✨
axienet_open(9)Driver open routine.✨
axienet_poll_controller(9)Axi Ethernet poll mechanism.✨
axienet_probe(9)Axi Ethernet probe function.✨
axienet_rx_dim_work(9)Adjust RX DIM settings✨
axienet_rx_irq(9)Rx Isr.✨
axienet_rx_poll(9)Triggered by RX ISR to complete the BD processing.✨
axienet_rx_submit_desc(9)Submit the rx descriptors to dmaengine. allocate skbuff, map the scatterlist and obtain a descriptor and then add the callback information and submit descriptor.✨
axienet_set_mac_address(9)Write the MAC address✨
axienet_set_multicast_list(9)Prepare the multicast table✨
axienet_setoptions(9)Set an Axi Ethernet option✨
axienet_start_xmit(9)Starts the transmission.✨
axienet_start_xmit_dmaengine(9)Starts the transmission.✨
axienet_stop(9)Driver stop routine.✨
axienet_tx_irq(9)Tx Done Isr.✨
axienet_tx_poll(9)Invoked once a transmit is completed by the Axi DMA Tx channel.✨
axienet_update_coalesce_rx(9)Set RX CR✨
axienet_update_coalesce_tx(9)Set TX CR✨
axis_fifo_read(9)Read a packet from AXIS-FIFO character device.✨
axis_fifo_write(9)Write buffer to AXIS-FIFO character device.✨
axp20x_device_probe(9)Probe a configured axp20x device✨
axp20x_device_remove(9)Remove a axp20x device✨
axp20x_match_device(9)Setup axp20x variant related fields✨
axxia_clkmux_get_parent(9)Return the index of selected parent clock✨
axxia_divclk_recalc_rate(9)Calculate clock divider output rage✨
axxia_pllclk_recalc(9)Calculate the PLL generated clock rate given the parent clock rate.✨

B

B+Tree basics(9)✨
b43_current_band(9)Returns the currently used band. Returns one of NL80211_BAND_2GHZ and NL80211_BAND_5GHZ.✨
b43_has_hardware_pctl(9)Hardware Power Control supported? Returns a boolean, whether hardware power control is supported.✨
b43_phy_allocate(9)Allocate PHY structs Allocate the PHY data structures, based on the current dev->phy.type✨
b43_phy_copy(9)copy contents of 16bit PHY register to another✨
b43_phy_exit(9)Cleanup PHY✨
b43_phy_free(9)Free PHY structs✨
b43_phy_init(9)Initialise the PHY✨
b43_phy_lock(9)Lock firmware PHY register access✨
b43_phy_mask(9)Mask a PHY register with a mask✨
b43_phy_maskset(9)Mask and OR a PHY register with a mask and bitmap✨
b43_phy_read(9)16bit PHY register read access✨
b43_phy_set(9)OR a PHY register with a bitmap✨
b43_phy_shm_tssi_read(9)Read the average of the last 4 TSSI from SHM.✨
b43_phy_txpower_check(9)Check TX power output.✨
b43_phy_unlock(9)Unlock firmware PHY register access✨
b43_phy_write(9)16bit PHY register write access✨
b43_radio_lock(9)Lock firmware radio register access✨
b43_radio_mask(9)Mask a 16bit radio register with a mask✨
b43_radio_maskset(9)Mask and OR a radio register with a mask and bitmap✨
b43_radio_read(9)16bit Radio register read access✨
b43_radio_set(9)OR a 16bit radio register with a bitmap✨
b43_radio_unlock(9)Unlock firmware radio register access✨
b43_radio_wait_value(9)Waits for a given value in masked register read✨
b43_radio_write(9)16bit Radio register write access✨
b43_software_rfkill(9)Turn the radio ON or OFF in software.✨
b43_switch_channel(9)Switch to another channel✨
backing_file_open(9)open a backing file for kernel internal use✨
Backlight control(9)✨
backlight_device_get_by_name(9)Get backlight device by name✨
backlight_disable(9)Disable backlight✨
backlight_enable(9)Enable backlight✨
backlight_force_update(9)tell the backlight subsystem that hardware state has changed✨
backlight_get_brightness(9)Returns the current brightness value✨
backlight_is_blank(9)Return true if display is expected to be blank✨
backlight_update_status(9)force an update of the backlight device status✨
bad_page_threshold (int) Bad page threshold is specifies the(9)✨
badblocks_check(9)check a given range for bad sectors✨
badblocks_clear(9)Remove a range of bad blocks to the table.✨
badblocks_exit(9)free the badblocks structure✨
badblocks_init(9)initialize the badblocks structure✨
badblocks_set(9)Add a range of bad blocks to the table.✨
badblocks_show(9)sysfs access to bad-blocks list✨
badblocks_store(9)sysfs access to bad-blocks list✨
balance_dirty_pages_ratelimited(9)balance dirty memory state.✨
balance_dirty_pages_ratelimited_flags(9)Balance dirty memory state.✨
balance_ref_count(9)catch up the channel reference count✨
balloon_page_alloc(9)allocates a new page for insertion into the balloon page list.✨