📦 linux-manual

82568 pages · page 375 of 413

T (continued)

txgbe_reset_hw(9)Perform hardware reset✨
txgbe_service_task(9)manages and runs subtasks✨
txgbe_setup_tc(9)routine to configure net_device for multiple traffic classes.✨
txgbe_sw_init(9)Initialize general software structures (struct wx)✨
txgbe_validate_eeprom_checksum(9)Validate EEPROM checksum✨
txgbevf_probe(9)Device Initialization Routine✨
txgbevf_remove(9)Device Removal Routine✨
txq_avail(9)return the number of available slots in a TX queue✨
txq_stats_init(9)Initialize the statistics of specific queue✨
txq_stop_maperr(9)stop a Tx queue due to I/O MMU exhaustion✨
txring_txq(9)helper to convert from a ring to a queue✨
type1_access_ok(9)check whether to use type 1✨
typec_altmode2port(9)Alternate Mode to USB Type-C port✨
typec_altmode_attention(9)Attention command✨
typec_altmode_enter(9)Enter Mode✨
typec_altmode_exit(9)Exit Mode✨
typec_altmode_get_cable_svdm_version(9)Get negotiated SVDM version for cable plug✨
typec_altmode_get_data_role(9)Get port data role✨
typec_altmode_get_orientation(9)Get cable plug orientation✨
typec_altmode_get_plug(9)Find cable plug alternate mode✨
typec_altmode_get_svdm_version(9)Get negotiated SVDM version✨
typec_altmode_notify(9)Communication between the OS and alternate mode driver✨
typec_altmode_put_plug(9)Decrement cable plug alternate mode reference count✨
typec_altmode_register_driver(9)registers a USB Type-C alternate mode device driver✨
typec_altmode_set_ops(9)Set ops for altmode✨
typec_altmode_state_update(9)Report the current status of an Alternate Mode negotiation✨
typec_altmode_unregister_driver(9)unregisters a USB Type-C alternate mode device driver✨
typec_altmode_update_active(9)Report Enter/Exit mode✨
typec_altmode_vdm(9)Send Vendor Defined Messages (VDM) to the partner✨
typec_cable_altmode_enter(9)Enter Mode✨
typec_cable_altmode_exit(9)Exit Mode✨
typec_cable_altmode_unsupported(9)Check if a cable restricts altmode✨
typec_cable_altmode_vdm(9)Send Vendor Defined Messages (VDM) between the cable plug and port.✨
typec_cable_get(9)Get a reference to the USB Type-C cable✨
typec_cable_is_active(9)Check is the USB Type-C cable active or passive✨
typec_cable_put(9)Decrement the reference count on USB Type-C cable✨
typec_cable_set_identity(9)Report result from Discover Identity command✨
typec_cable_set_svdm_version(9)Set negotiated Structured VDM (SVDM) Version✨
typec_find_orientation(9)Convert orientation string to enum typec_orientation✨
typec_find_port_data_role(9)Get the typec port data capability✨
typec_find_port_power_role(9)Get the typec port power capability✨
typec_find_power_role(9)Find the typec one specific power role✨
typec_find_pwr_opmode(9)Get the typec power operation mode capability✨
typec_get_cable_svdm_version(9)Get cable negotiated SVDM Version✨
typec_get_data_role(9)Get port data role✨
typec_get_drvdata(9)Return private driver data pointer✨
typec_get_negotiated_svdm_version(9)Get negotiated SVDM Version✨
typec_get_orientation(9)Get USB Type-C cable plug orientation✨
typec_match_altmode(9)Match SVID and mode to an array of alternate modes✨
typec_mode_selection_delete(9)Delete an alternate mode selection instance✨
typec_mode_selection_start(9)Start an alternate mode selection process✨
typec_mux_put(9)Release handle to a Multiplexer✨
typec_mux_register(9)Register Multiplexer routing USB Type-C pins✨
typec_mux_unregister(9)Unregister Multiplexer Switch✨
typec_partner_register_altmode(9)Register USB Type-C Partner Alternate Mode✨
typec_partner_set_identity(9)Report result from Discover Identity command✨
typec_partner_set_num_altmodes(9)Set the number of available partner altmodes✨
typec_partner_set_pd_revision(9)Set the PD revision supported by the partner✨
typec_partner_set_svdm_version(9)Set negotiated Structured VDM (SVDM) Version✨
typec_partner_set_usb_mode(9)Assign active USB Mode for the partner✨
typec_partner_set_usb_power_delivery(9)Declare USB Power Delivery Contract.✨
typec_partner_usb_power_delivery_register(9)Register Type-C partner USB Power Delivery Support✨
typec_plug_register_altmode(9)Register USB Type-C Cable Plug Alternate Mode✨
typec_plug_set_num_altmodes(9)Set the number of available plug altmodes✨
typec_port_register_altmode(9)Register USB Type-C Port Alternate Mode✨
typec_port_register_cable_ops(9)Register typec_cable_ops to port altmodes✨
typec_port_set_usb_mode(9)Set the operational USB mode for the port✨
typec_port_set_usb_power_delivery(9)Assign USB PD for port.✨
typec_register_cable(9)Register a USB Type-C Cable✨
typec_register_partner(9)Register a USB Type-C Partner✨
typec_register_plug(9)Register a USB Type-C Cable Plug✨
typec_register_port(9)Register a USB Type-C Port✨
typec_retimer_put(9)Release handle to a retimer.✨
typec_retimer_register(9)Register a retimer device.✨
typec_retimer_unregister(9)Unregister retimer device.✨
typec_set_data_role(9)Report data role change✨
typec_set_mode(9)Set mode of operation for USB Type-C connector✨
typec_set_orientation(9)Set USB Type-C cable plug orientation✨
typec_set_pwr_opmode(9)Report changed power operation mode✨
typec_set_pwr_role(9)Report power role change✨
typec_set_vconn_role(9)Report VCONN source change✨
typec_switch_put(9)Release USB Type-C orientation switch✨
typec_switch_register(9)Register USB Type-C orientation switch✨
typec_switch_unregister(9)Unregister USB Type-C orientation switch✨
typec_unregister_altmode(9)Unregister Alternate Mode✨
typec_unregister_cable(9)Unregister a USB Type-C Cable✨
typec_unregister_partner(9)Unregister a USB Type-C Partner✨
typec_unregister_plug(9)Unregister a USB Type-C Cable Plug✨
typec_unregister_port(9)Unregister a USB Type-C Port✨
typeof_flex_counter(9)Return the type of the counter variable of a given flexible array member annotated by __counted_by().✨
tzic_enable_wake(9)enable wakeup interrupt✨

U

u64_to_ether_addr(9)Convert a u64 to an Ethernet address.✨
u64_to_user_ptr(9)cast a pointer passed as u64 from user space to void __user *✨
uacce_alloc(9)alloc an accelerator✨
uacce_register(9)add the accelerator to cdev and export to user space✨
uacce_remove(9)remove the accelerator✨
UAPI(9)✨
uAPI trace events(9)✨
uart_change_pm(9)set power state of the port✨
uart_console_write(9)write a console message to a serial port✨
uart_dtr_rts(9)port helper to set uart signals✨
uart_get_baud_rate(9)return baud rate for a particular port✨
uart_get_divisor(9)return uart clock divisor✨
uart_get_lsr_info(9)get line status register info✨
uart_get_rs485_mode(9)retrieve rs485 properties for given uart✨
uart_handle_cts_change(9)handle a change of clear-to-send state✨
uart_handle_dcd_change(9)handle a change of carrier detect state✨
uart_insert_char(9)push a char to the uart layer✨
uart_match_port(9)are the two ports equivalent?✨
uart_parse_earlycon(9)Parse earlycon options✨
uart_parse_options(9)Parse serial port baud/parity/bits/flow control.✨
uart_port_lock(9)Lock the UART port✨
uart_port_lock_irq(9)Lock the UART port and disable interrupts✨
uart_port_lock_irqsave(9)Lock the UART port, save and disable interrupts✨
uart_port_set_cons(9)Safely set the @cons field for a uart✨
uart_port_trylock(9)Try to lock the UART port✨
uart_port_trylock_irqsave(9)Try to lock the UART port, save and disable interrupts✨
uart_port_tx(9)- transmit helper for uart_port✨
uart_port_tx_flags(9)- transmit helper for uart_port with flags✨
uart_port_tx_limited(9)- transmit helper for uart_port with count limiting✨
uart_port_tx_limited_flags(9)- transmit helper for uart_port with count limiting with flags✨
uart_port_unlock(9)Unlock the UART port✨
uart_port_unlock_irq(9)Unlock the UART port and re-enable interrupts✨
uart_port_unlock_irqrestore(9)Unlock the UART port, restore interrupts✨
uart_register_driver(9)register a driver with the uart core layer✨
uart_set_options(9)setup the serial console parameters✨
uart_try_toggle_sysrq(9)Enables SysRq from serial line✨
uart_unregister_driver(9)remove a driver from the uart core layer✨
uart_update_timeout(9)update per-port frame timing information✨
uart_write_wakeup(9)schedule write processing✨
uart_xmit_advance(9)Advance xmit buffer and account Tx'ed chars✨
uaudio_dev_intf_cleanup(9)cleanup transfer resources✨
uaudio_endpoint_setup(9)fetch and populate endpoint params✨
uaudio_event_ring_cleanup_free(9)cleanup secondary event ring✨
uaudio_event_ring_setup(9)fetch and populate event ring params✨
uaudio_iommu_map_pa(9)maps iommu memory for adsp✨
uaudio_iommu_unmap(9)unmaps iommu memory for adsp✨
uaudio_populate_uac_desc(9)parse UAC parameters and populate QMI resp✨
uaudio_sideband_notifier(9)xHCI sideband event handler✨
uaudio_transfer_buffer_setup(9)fetch and populate xfer buffer params✨
ubi_add_av(9)add volume to the attaching information.✨
ubi_add_to_av(9)add used physical eraseblock to the attaching information.✨
ubi_add_volume(9)add volume.✨
ubi_alloc_aeb(9)allocate an aeb element✨
ubi_attach(9)attach an MTD device.✨
ubi_attach_fastmap(9)creates ubi_attach_info from a fastmap.✨
ubi_attach_mtd_dev(9)attach an MTD device.✨
ubi_bitflip_check(9)Check an eraseblock for bitflips and scrub it if needed.✨
ubi_calc_data_len(9)calculate how much real data is stored in a buffer.✨
ubi_calc_fm_size(9)calculates the fastmap size in bytes for an UBI device.✨
ubi_calculate_reserved(9)calculate how many PEBs must be reserved for bad eraseblock handling.✨
ubi_change_vtbl_record(9)change volume table record.✨
ubi_check_pattern(9)check if buffer contains only a certain byte pattern.✨
ubi_check_volume(9)check the contents of a static volume.✨
ubi_close_volume(9)close UBI volume.✨
ubi_compare_lebs(9)find out which logical eraseblock is newer.✨
ubi_create_volume(9)create volume.✨
ubi_dbg_is_bad_hdr(9)if it is time to emulate a bad header✨
ubi_dbg_is_bad_hdr_ebadmsg(9)if it is time to emulate a bad header with ECC error.✨
ubi_dbg_is_bgt_disabled(9)if the background thread is disabled.✨
ubi_dbg_is_bitflip(9)if it is time to emulate a bit-flip.✨
ubi_dbg_is_eccerr(9)if it is time to emulate ECC error.✨
ubi_dbg_is_erase_failure(9)if its time to emulate an erase failure.✨
ubi_dbg_is_ff(9)if it is time to emulate that read region is only 0xFF.✨
ubi_dbg_is_ff_bitflips(9)if it is time to emulate that read region is only 0xFF with error reported by the MTD driver✨
ubi_dbg_is_power_cut(9)if it is time to emulate power cut.✨
ubi_dbg_is_read_failure(9)if it is time to emulate a read failure.✨
ubi_dbg_is_write_failure(9)if it is time to emulate a write failure.✨
ubi_dbg_power_cut(9)emulate a power cut if it is time to do so✨
ubi_debugfs_exit(9)remove UBI debugfs directory.✨
ubi_debugfs_exit_dev(9)free all debugfs files corresponding to device @ubi✨
ubi_debugfs_init(9)create UBI debugfs directory.✨
ubi_debugfs_init_dev(9)initialize debugfs for an UBI device.✨
ubi_detach_mtd_dev(9)detach an MTD device.✨
ubi_do_get_device_info(9)get information about UBI device.✨
ubi_do_get_volume_info(9)get information about UBI volume.✨
ubi_dump_aeb(9)dump a &struct ubi_ainf_peb object.✨
ubi_dump_av(9)dump a &struct ubi_ainf_volume object.✨
ubi_dump_ec_hdr(9)dump an erase counter header.✨
ubi_dump_flash(9)dump a region of flash.✨
ubi_dump_mkvol_req(9)dump a &struct ubi_mkvol_req object.✨
ubi_dump_vid_hdr(9)dump a volume identifier header.✨
ubi_dump_vol_info(9)dump volume information.✨
ubi_dump_vtbl_record(9)dump a &struct ubi_vtbl_record object.✨
ubi_early_get_peb(9)get a free physical eraseblock.✨
ubi_eba_copy_leb(9)copy logical eraseblock.✨
ubi_eba_copy_table(9)copy the EBA table attached to vol into another table✨
ubi_eba_create_table(9)allocate a new EBA table and initialize it with all LEBs unmapped✨
ubi_eba_destroy_table(9)destroy an EBA table✨
ubi_eba_get_ldesc(9)get information about a LEB✨
ubi_eba_init(9)initialize the EBA sub-system using attaching information.✨
ubi_eba_is_mapped(9)check if a LEB is mapped.✨
ubi_eba_read_leb(9)read data.✨
ubi_eba_read_leb_sg(9)read data into a scatter gather list.✨
ubi_eba_replace_table(9)assign a new EBA table to a volume✨
ubi_eba_unmap_leb(9)un-map logical eraseblock.✨
ubi_eba_write_leb(9)write data to dynamic volume.✨
ubi_eba_write_leb_st(9)write data to static volume.✨
ubi_ensure_anchor_pebs(9)schedule wear-leveling to produce an anchor PEB.✨
ubi_enumerate_volumes(9)send "add" notification for all existing volumes.✨