📦 linux-manual

82568 pages · page 400 of 413

W (continued)

wx_irq_disable(9)Mask off interrupt generation on the NIC✨
wx_is_non_eop(9)process handling of non-EOP buffers✨
wx_lpbthresh(9)calculate low water mark for flow control✨
wx_mng_present(9)returns 0 when management capability is present✨
wx_mta_vector(9)Determines bit-vector in multicast table to set✨
wx_negotiate_api_version(9)Negotiate supported API version✨
wx_obtain_mbx_lock_pf(9)obtain mailbox lock✨
wx_obtain_mbx_lock_vf(9)obtain mailbox lock✨
wx_pbthresh_setup(9)calculate and setup high low water marks✨
wx_poll(9)NAPI polling RX/TX cleanup routine✨
wx_poll_for_ack(9)Wait for message acknowledgment✨
wx_poll_for_msg(9)Wait for message notification✨
wx_process_skb_fields(9)Populate skb header fields from Rx descriptor✨
wx_ptp_clear_tx_timestamp(9)utility function to clear Tx timestamp state✨
wx_ptp_convert_to_hwtstamp(9)convert register value to hw timestamp✨
wx_ptp_overflow_check(9)watchdog task to detect SYSTIME overflow✨
wx_ptp_reset_cyclecounter(9)create the cycle counter from hw✨
wx_ptp_rx_hang(9)detect error case when Rx timestamp registers latched✨
wx_ptp_rx_hwtstamp(9)utility function which checks for RX time stamp✨
wx_ptp_stop(9)destroy the ptp_clock device✨
wx_ptp_suspend(9)stop ptp work items✨
wx_ptp_tx_hang(9)detect error case where Tx timestamp never finishes✨
wx_ptp_tx_hwtstamp_work(9)check for a pending Tx time stamp✨
wx_read_ee_hostif(9)Read EEPROM word using a host interface cmd✨
wx_read_ee_hostif_buffer(9)Read EEPROM word(s) using hostif✨
wx_read_ee_hostif_data(9)Read EEPROM word using a host interface cmd assuming that the semaphore is already obtained.✨
wx_read_mbx_pf(9)Read a message from the mailbox✨
wx_read_mbx_vf(9)Reads a message from the inbox intended for vf✨
wx_read_posted_mbx(9)Wait for message notification and receive message✨
wx_release_sw_sync(9)Release SW semaphore✨
wx_reset_hw_vf(9)Performs hardware reset✨
wx_rlpml_set_vf(9)Set the maximum receive packet length✨
wx_rx_checksum(9)indicate in skb if hw indicated a good cksum✨
wx_set_interrupt_capability(9)set MSI-X or MSI if supported✨
wx_set_ivar(9)set the IVAR registers, mapping interrupt causes to vectors✨
wx_set_mac(9)Change the Ethernet Address of the NIC✨
wx_set_mta(9)Set bit-vector in multicast table✨
wx_set_rar(9)Set Rx address register✨
wx_set_rar_vf(9)set device MAC address✨
wx_set_rss_queues(9)Allocate queues for RSS✨
wx_set_rxpba(9)Initialize Rx packet buffer✨
wx_set_vfta(9)Set VLAN filter table✨
wx_set_vfta_vf(9)Set/Unset vlan filter table address✨
wx_set_vlvf(9)Set VLAN Pool Filter✨
wx_setup_all_rx_resources(9)allocate all queues Rx resources✨
wx_setup_all_tx_resources(9)allocate all queues Tx resources✨
wx_setup_isb_resources(9)allocate interrupt status resources✨
wx_setup_rx_resources(9)allocate Rx resources (Descriptors)✨
wx_setup_tx_resources(9)allocate Tx resources (Descriptors)✨
wx_start_hw(9)Prepare hardware for Tx/Rx✨
wx_stop_adapter(9)Generic stop Tx/Rx units✨
wx_stop_adapter_vf(9)Generic stop Tx/Rx units✨
wx_update_mc_addr_list(9)Updates MAC list of multicast addresses✨
wx_update_mc_addr_list_vf(9)Update Multicast addresses✨
wx_update_stats(9)Update the board statistics counters.✨
wx_update_xcast_mode_vf(9)Update Multicast mode✨
wx_write_eitr(9)write EITR register in hardware specific way✨
wx_write_mbx_pf(9)Places a message in the mailbox✨
wx_write_mbx_vf(9)Write a message to the mailbox✨
wx_write_mc_addr_list(9)write multicast addresses to MTA✨
wx_write_posted_mbx(9)Write a message to the mailbox, wait for ack✨
wx_write_uc_addr_list(9)write unicast addresses to RAR table✨

X

x25_get_route(9)Find a route given an X.25 address.✨
x25_parse_facilities(9)Parse facilities from skb into the facilities structs✨
x509_decode_time(9)Decode an X.509 time ASN.1 object✨
x86_acpi_enter_sleep_state(9)enter sleep state✨
x86_acpi_suspend_lowlevel(9)save kernel state✨
x86_clear_cpu_buffers(9)Buffer clearing support for different x86 CPU vulns✨
x86_idle_clear_cpu_buffers(9)Buffer clearing support in idle for the MDS and TSA vulnerabilities.✨
x86_init_dev_msi_info(9)Domain info setup for MSI domains✨
X86_MATCH_CPU(9)Base macro for CPU matching✨
x86_match_cpu(9)match current CPU against an array of x86_cpu_ids✨
X86_MATCH_FEATURE(9)Macro for matching a CPU feature✨
X86_MATCH_VENDOR_FAM(9)Match vendor and family✨
X86_MATCH_VENDOR_FAM_FEATURE(9)Macro for matching vendor, family and CPU feature✨
X86_MATCH_VENDOR_FAM_MODEL(9)Match vendor, family and model✨
X86_MATCH_VENDOR_FEATURE(9)Macro for matching vendor and CPU feature✨
X86_MATCH_VFM(9)Match encoded vendor/family/model✨
X86_MATCH_VFM_CPU_TYPE(9)Match encoded vendor/family/model/type✨
X86_MATCH_VFM_FEATURE(9)Match encoded vendor/family/model/feature✨
X86_MATCH_VFM_STEPS(9)Match encoded vendor/family/model and steppings range.✨
x86_msi_prepare(9)Setup of msi_alloc_info_t for allocations✨
x86_numa_init(9)Initialize NUMA✨
x86_perf_get_lbr(9)get the LBR records information✨
x86_perf_rdpmc_index(9)Return PMC counter used for event✨
x86_spec_ctrl_restore_host(9)Restore host speculation control registers✨
x86_spec_ctrl_set_guest(9)Set speculation control registers for the guest✨
x_table_lookup(9)lookup an x transition name via transition table✨
x_to_label(9)get target label for a given xindex✨
xa_alloc(9)Find somewhere to store this entry in the XArray.✨
xa_alloc_bh(9)Find somewhere to store this entry in the XArray.✨
xa_alloc_cyclic(9)Find somewhere to store this entry in the XArray.✨
xa_alloc_cyclic_bh(9)Find somewhere to store this entry in the XArray.✨
xa_alloc_cyclic_irq(9)Find somewhere to store this entry in the XArray.✨
xa_alloc_irq(9)Find somewhere to store this entry in the XArray.✨
xa_clear_mark(9)Clear this mark on this entry.✨
xa_cmpxchg(9)Conditionally replace an entry in the XArray.✨
xa_cmpxchg_bh(9)Conditionally replace an entry in the XArray.✨
xa_cmpxchg_irq(9)Conditionally replace an entry in the XArray.✨
xa_delete_node(9)Private interface for workingset code.✨
xa_destroy(9)Free all internal data structures.✨
xa_empty(9)Determine if an array has any present entries.✨
xa_erase(9)Erase this entry from the XArray.✨
xa_erase_bh(9)Erase this entry from the XArray.✨
xa_erase_irq(9)Erase this entry from the XArray.✨
xa_err(9)Turn an XArray result into an errno.✨
xa_extract(9)Copy selected entries from the XArray into a normal array.✨
xa_find(9)Search the XArray for an entry.✨
xa_find_after(9)Search the XArray for a present entry.✨
xa_for_each(9)Iterate over present entries in an XArray.✨
xa_for_each_marked(9)Iterate over marked entries in an XArray.✨
xa_for_each_range(9)Iterate over a portion of an XArray.✨
xa_for_each_start(9)Iterate over a portion of an XArray.✨
xa_get_mark(9)Inquire whether this mark is set on this entry.✨
xa_get_order(9)Get the order of an entry.✨
xa_init(9)Initialise an empty XArray.✨
xa_init_flags(9)Initialise an empty XArray with flags.✨
xa_insert(9)Store this entry in the XArray unless another entry is already present.✨
xa_insert_bh(9)Store this entry in the XArray unless another entry is already present.✨
xa_insert_irq(9)Store this entry in the XArray unless another entry is already present.✨
xa_is_advanced(9)Is the entry only permitted for the advanced API?✨
xa_is_err(9)Report whether an XArray operation returned an error✨
xa_is_retry(9)Is the entry a retry entry?✨
xa_is_sibling(9)Is the entry a sibling entry?✨
xa_is_value(9)Determine if an entry is a value.✨
xa_is_zero(9)Is the entry a zero entry?✨
xa_load(9)Load an entry from an XArray.✨
xa_marked(9)Inquire whether any entry in this array has a mark set✨
xa_mk_value(9)Create an XArray entry from an integer.✨
xa_pointer_tag(9)Get the tag stored in an XArray entry.✨
xa_release(9)Release a reserved entry.✨
xa_reserve(9)Reserve this index in the XArray.✨
xa_reserve_bh(9)Reserve this index in the XArray.✨
xa_reserve_irq(9)Reserve this index in the XArray.✨
xa_set_mark(9)Set this mark on this entry.✨
XA_STATE(9)Declare an XArray operation state.✨
XA_STATE_ORDER(9)Declare an XArray operation state.✨
xa_store(9)Store this entry in the XArray.✨
xa_store_bh(9)Store this entry in the XArray.✨
xa_store_irq(9)Store this entry in the XArray.✨
xa_store_range(9)Store this entry at a range of indices in the XArray.✨
xa_tag_pointer(9)Create an XArray entry for a tagged pointer.✨
xa_to_value(9)Get value stored in an XArray entry.✨
xa_untag_pointer(9)Turn an XArray entry into a plain pointer.✨
xa_update_node_t(9)A callback function from the XArray.✨
xas_advance(9)Skip over sibling entries.✨
xas_clear_mark(9)Clears the mark on this entry and its parents.✨
xas_create_range(9)Ensure that stores to this range will succeed✨
xas_error(9)Return an errno stored in the xa_state.✨
xas_find(9)Find the next present entry in the XArray.✨
xas_find_conflict(9)Find the next present entry in a range.✨
xas_find_marked(9)Find the next marked entry in the XArray.✨
xas_for_each(9)Iterate over a range of an XArray.✨
xas_for_each_conflict(9)Iterate over a range of an XArray.✨
xas_for_each_marked(9)Iterate over a range of an XArray.✨
xas_free_nodes(9)Free this node and all nodes that it references✨
xas_get_mark(9)Returns the state of this mark.✨
xas_get_order(9)Get the order of an entry.✨
xas_init_marks(9)Initialise all marks for the entry✨
xas_invalid(9)Is the xas in a retry or error state?✨
xas_is_node(9)Does the xas point to a node?✨
xas_load(9)Load an entry from the XArray (advanced).✨
xas_next(9)Move state to next index.✨
xas_next_entry(9)Advance iterator to next present entry.✨
xas_next_marked(9)Advance iterator to next marked entry.✨
xas_nomem(9)Allocate memory if needed.✨
xas_pause(9)Pause a walk to drop a lock.✨
xas_prev(9)Move iterator to previous index.✨
xas_reload(9)Refetch an entry from the xarray.✨
xas_reset(9)Reset an XArray operation state.✨
xas_retry(9)Retry the operation if appropriate.✨
xas_set(9)Set up XArray operation state for a different index.✨
xas_set_err(9)Note an error in the xa_state.✨
xas_set_mark(9)Sets the mark on this entry and its parents.✨
xas_set_order(9)Set up XArray operation state for a multislot entry.✨
xas_set_update(9)Set up XArray operation state for a callback.✨
xas_split(9)Split a multi-index entry into smaller entries.✨
xas_split_alloc(9)Allocate memory for splitting an entry.✨
xas_store(9)Store this entry in the XArray.✨
xas_try_split(9)Try to split a multi-index entry.✨
xas_try_split_min_order(9)Minimal split order xas_try_split() can accept✨
xas_valid(9)Is the xas a valid cursor into the array?✨
xattr_full_name(9)Compute full attribute name from suffix✨
xattr_handler_can_list(9)check whether xattr can be listed✨
xb_init_comms(9)Set up interrupt handler off store event channel.✨
xb_write(9)low level write✨
xbc_array_for_each_value(9)Iterate value nodes on an array✨
xbc_calc_checksum(9)Calculate checksum of bootconfig✨
xbc_embedded_cmdline_applied(9)Did the embedded cmdline get prepended?✨
xbc_find_node(9)Find a node which matches the key✨
xbc_find_value(9)Find a value which matches the key✨
xbc_for_each_key_value(9)Iterate key-value pairs✨
xbc_get_info(9)Get the information of loaded boot config✨
xbc_init(9)Parse given XBC file and build XBC internal tree✨
xbc_node_compose_key(9)Compose full key string of the XBC node✨
xbc_node_compose_key_after(9)Compose partial key string of the XBC node✨
xbc_node_find_next_key_value(9)Find the next key-value pair nodes✨
xbc_node_find_next_leaf(9)Find the next leaf node under given node✨
xbc_node_find_subkey(9)Find a subkey node which matches given key✨
xbc_node_find_value(9)Find a value node which matches given key✨