drm_dp_vsc_sdp_pack(9)
π drm_dp_vsc_sdp_pack(9) β¨
okay so bestie, this one's from the Kernel API Manual and it's honestly a little packing icon π β it's the function that takes your VSC SDP and shoves it into a generic dp_sdp, no cap.
πΈ NAME πΈ
drm_dp_vsc_sdp_pack β pack a given vsc sdp into generic dp_sdp π«Ά
β SYNOPSIS β
ssize_t drm_dp_vsc_sdp_pack (const struct drm_dp_vsc_sdp *vsc , struct
dp_sdp *sdp );
π¦ ARGUMENTS π¦
vscβ the vsc sdp, and listen: it has to be initialized according to its purpose as defined in table 2-118 β table 2-120 in the DP 1.4a specification. like, that's the vibe check it has to pass, iykyk πsdpβ a valid handle to the genericdp_sdpwhich will be packed. valid handle only, bestie, don't be out here handing it nonsense π
π DESCRIPTION π
Returns length of sdp on success and error code on failure. that's it, that's the whole tea ββ¨
π₯ SEE ALSO π₯
the whole dp helpers friend group showed up, fr fr β Kernel file ./drivers/gpu/drm/display/drm_dp_helper.c:
dp helpers(9)drm_dp_phy_name(9)drm_dp_lttpr_wake_timeout_setup(9)dp helpers(9)drm_dp_dpcd_probe(9)drm_dp_dpcd_set_powered(9)drm_dp_dpcd_set_probe(9)drm_dp_dpcd_read(9)drm_dp_dpcd_write(9)drm_dp_dpcd_read_link_status(9)drm_dp_dpcd_read_phy_link_status(9)drm_dp_link_power_up(9)drm_dp_link_power_down(9)drm_dp_dpcd_write_payload(9)drm_dp_dpcd_clear_payload(9)drm_dp_dpcd_poll_act_handled(9)drm_dp_downstream_is_type(9)drm_dp_downstream_is_tmds(9)drm_dp_send_real_edid_checksum(9)drm_dp_read_dpcd_caps(9)drm_dp_read_downstream_info(9)drm_dp_downstream_max_dotclock(9)drm_dp_downstream_max_tmds_clock(9)drm_dp_downstream_min_tmds_clock(9)drm_dp_downstream_max_bpc(9)drm_dp_downstream_420_passthrough(9)drm_dp_downstream_444_to_420_conversion(9)drm_dp_downstream_rgb_to_ycbcr_conversion(9)drm_dp_downstream_mode(9)drm_dp_downstream_id(9)drm_dp_downstream_debug(9)drm_dp_subconnector_type(9)drm_dp_set_subconnector_property(9)drm_dp_read_sink_count_cap(9)drm_dp_read_sink_count(9)drm_dp_remote_aux_init(9)drm_dp_aux_init(9)drm_dp_aux_register(9)drm_dp_aux_unregister(9)drm_dp_psr_setup_time(9)drm_dp_start_crc(9)drm_dp_stop_crc(9)drm_dp_read_desc(9)drm_dp_dump_lttpr_desc(9)drm_dp_dsc_sink_bpp_incr(9)drm_dp_dsc_slice_count_to_mask(9)drm_dp_dsc_sink_slice_count_mask(9)drm_dp_dsc_sink_max_slice_count(9)drm_dp_dsc_sink_line_buf_depth(9)drm_dp_dsc_sink_supported_input_bpcs(9)drm_dp_dsc_sink_max_slice_throughput(9)drm_dp_dsc_branch_max_overall_throughput(9)drm_dp_dsc_branch_max_line_width(9)drm_dp_read_lttpr_common_caps(9)drm_dp_read_lttpr_phy_caps(9)drm_dp_lttpr_count(9)drm_dp_lttpr_max_link_rate(9)drm_dp_lttpr_set_transparent_mode(9)drm_dp_lttpr_init(9)drm_dp_lttpr_max_lane_count(9)drm_dp_lttpr_voltage_swing_level_3_supported(9)drm_dp_lttpr_pre_emphasis_level_3_supported(9)drm_dp_get_phy_test_pattern(9)drm_dp_set_phy_test_pattern(9)drm_dp_as_sdp_supported(9)drm_dp_vsc_sdp_supported(9)drm_dp_get_pcon_max_frl_bw(9)drm_dp_pcon_frl_prepare(9)drm_dp_pcon_is_frl_ready(9)drm_dp_pcon_frl_configure_1(9)drm_dp_pcon_frl_configure_2(9)drm_dp_pcon_reset_frl_config(9)drm_dp_pcon_frl_enable(9)drm_dp_pcon_hdmi_link_active(9)drm_dp_pcon_hdmi_link_mode(9)drm_dp_pcon_hdmi_frl_link_error_count(9)drm_dp_pcon_pps_default(9)drm_dp_pcon_pps_override_buf(9)drm_edp_backlight_set_level(9)drm_edp_backlight_enable(9)drm_edp_backlight_disable(9)drm_edp_backlight_init(9)drm_panel_dp_aux_backlight(9)drm_dp_link_symbol_cycles(9)drm_dp_bw_overhead(9)drm_dp_bw_channel_coding_efficiency(9)drm_dp_max_dprx_data_rate(9)
heads up bestie: vsc really does need to be initialized the way the spec says, per table 2-118 β table 2-120 in DP 1.4a β that's not me being dramatic, that's literally in the docs π
π that's the whole page!! sourced straight from ./drivers/gpu/drm/display, dated October 2026, and the call is literally just drm_dp_vsc_sdp_pack(9) β slay, go pack those sdp's, ily, bye π§ππ
π¦ where this page comes from
- nixpkgs unstable: linux-manual 7.3.1
- π girlified by deepseek-ai/DeepSeek-V4.1-Flash-1017 on : a language model's rewrite of the original, under its terms