drm_dp_pcon_frl_prepare(9)

drm_dp_pcon_frl_prepare 💅

okay bestie, welcome to the drm_dp_pcon_frl_prepare(9) page from the Kernel API Manual. This one is short and sweet: we’re prepping a PCON for FRL, and the function is literally right here. 🫶

🎀 NAME 🎀

drm_dp_pcon_frl_prepare — Prepare PCON for FRL. periodt.

✨ SYNOPSIS ✨

int drm_dp_pcon_frl_prepare (struct drm_dp_aux *aux , bool
       enable_frl_ready_hpd );

🌸 ARGUMENTS 🌸

• aux — DisplayPort AUX channel.
• enable_frl_ready_hpd — Configure DP_PCON_ENABLE_HPD_READY.

💖 DESCRIPTION 💖

Returns 0 if success, else returns negative error code. That’s the whole vibe check: 0 = slay, negative = not slay. 😭

🦋 SEE ALSO 🦋

okay so the SEE ALSO section is giving full group-chat roll call, and every single one is invited:

• Kernel file ./drivers/gpu/drm/display/drm_dp_helper.c
• dp helpers(9)
• drm_dp_phy_name(9)
• drm_dp_lttpr_wake_timeout_setup(9)
• dp helpers(9)
• drm_dp_dpcd_probe(9)
• drm_dp_dpcd_set_powered(9)
• drm_dp_dpcd_set_probe(9)
• drm_dp_dpcd_read(9)
• drm_dp_dpcd_write(9)
• drm_dp_dpcd_read_link_status(9)
• drm_dp_dpcd_read_phy_link_status(9)
• drm_dp_link_power_up(9)
• drm_dp_link_power_down(9)
• drm_dp_dpcd_write_payload(9)
• drm_dp_dpcd_clear_payload(9)
• drm_dp_dpcd_poll_act_handled(9)
• drm_dp_downstream_is_type(9)
• drm_dp_downstream_is_tmds(9)
• drm_dp_send_real_edid_checksum(9)
• drm_dp_read_dpcd_caps(9)
• drm_dp_read_downstream_info(9)
• drm_dp_downstream_max_dotclock(9)
• drm_dp_downstream_max_tmds_clock(9)
• drm_dp_downstream_min_tmds_clock(9)
• drm_dp_downstream_max_bpc(9)
• drm_dp_downstream_420_passthrough(9)
• drm_dp_downstream_444_to_420_conversion(9)
• drm_dp_downstream_rgb_to_ycbcr_conversion(9)
• drm_dp_downstream_mode(9)
• drm_dp_downstream_id(9)
• drm_dp_downstream_debug(9)
• drm_dp_subconnector_type(9)
• drm_dp_set_subconnector_property(9)
• drm_dp_read_sink_count_cap(9)
• drm_dp_read_sink_count(9)
• drm_dp_remote_aux_init(9)
• drm_dp_aux_init(9)
• drm_dp_aux_register(9)
• drm_dp_aux_unregister(9)
• drm_dp_psr_setup_time(9)
• drm_dp_start_crc(9)
• drm_dp_stop_crc(9)
• drm_dp_read_desc(9)
• drm_dp_dump_lttpr_desc(9)
• drm_dp_dsc_sink_bpp_incr(9)
• drm_dp_dsc_slice_count_to_mask(9)
• drm_dp_dsc_sink_slice_count_mask(9)
• drm_dp_dsc_sink_max_slice_count(9)
• drm_dp_dsc_sink_line_buf_depth(9)
• drm_dp_dsc_sink_supported_input_bpcs(9)
• drm_dp_dsc_sink_max_slice_throughput(9)
• drm_dp_dsc_branch_max_overall_throughput(9)
• drm_dp_dsc_branch_max_line_width(9)
• drm_dp_read_lttpr_common_caps(9)
• drm_dp_read_lttpr_phy_caps(9)
• drm_dp_lttpr_count(9)
• drm_dp_lttpr_max_link_rate(9)
• drm_dp_lttpr_set_transparent_mode(9)
• drm_dp_lttpr_init(9)
• drm_dp_lttpr_max_lane_count(9)
• drm_dp_lttpr_voltage_swing_level_3_supported(9)
• drm_dp_lttpr_pre_emphasis_level_3_supported(9)
• drm_dp_get_phy_test_pattern(9)
• drm_dp_set_phy_test_pattern(9)
• drm_dp_as_sdp_supported(9)
• drm_dp_vsc_sdp_supported(9)
• drm_dp_vsc_sdp_pack(9)
• drm_dp_get_pcon_max_frl_bw(9)
• drm_dp_pcon_is_frl_ready(9)
• drm_dp_pcon_frl_configure_1(9)
• drm_dp_pcon_frl_configure_2(9)
• drm_dp_pcon_reset_frl_config(9)
• drm_dp_pcon_frl_enable(9)
• drm_dp_pcon_hdmi_link_active(9)
• drm_dp_pcon_hdmi_link_mode(9)
• drm_dp_pcon_hdmi_frl_link_error_count(9)
• drm_dp_pcon_pps_default(9)
• drm_dp_pcon_pps_override_buf(9)
• drm_edp_backlight_set_level(9)
• drm_edp_backlight_enable(9)
• drm_edp_backlight_disable(9)
• drm_edp_backlight_init(9)
• drm_panel_dp_aux_backlight(9)
• drm_dp_link_symbol_cycles(9)
• drm_dp_bw_overhead(9)
• drm_dp_bw_channel_coding_efficiency(9)
• drm_dp_max_dprx_data_rate(9)

and yes bestie, dp helpers(9) really is listed twice — the original said what it said, and we respect the icon behavior. 💅

kisses, this page is sourced from ./drivers/gpu/drm/display and it’s dated October 2026. 💜