drm_dp_lttp..._3_supported(9)

💖 drm_dp_lttpr_pre_emphasis_level_3_supported 💖

okay so welcome to the Kernel API Manual, bestie — this page is all about drm_dp_lttpr_pre_emphasis_level_3_supported, and it's literally a tiny little vibe check for LTTPR caps. Short page, big energy.

---

🌸 NAME 🌸

drm_dp_lttpr_pre_emphasis_level_3_supported — check for LTTPR preemph3 support. No cap, that's the whole assignment.

---

✨ SYNOPSIS ✨

bool drm_dp_lttpr_pre_emphasis_level_3_supported (const u8
caps[DP_LTTPR_PHY_CAP_SIZE] );

---

🎀 ARGUMENTS 🎀

• caps — the LTTPR PHY capabilities. That's it, that's the arg. One parameter, main character energy.

---

🦋 DESCRIPTION 🦋

Returns true if the caps for an LTTPR TX PHY indicate support for pre-emphasis level 3. It's a bool, so it's giving yes/no energy, and if your caps don't say it, you're not getting true. Periodt.

---

👑 SEE ALSO 👑

Bestie, this friend group is huge — pull up a chair, hydrate, and scroll:

• Kernel file ./drivers/gpu/drm/display/drm_dp_helper.c
• dp helpers(9)
• drm_dp_phy_name(9)
• drm_dp_lttpr_wake_timeout_setup(9)
• dp helpers(9) — yes, again. The original page said it twice, so we're keeping it twice 💀
• drm_dp_dpcd_probe(9)
• drm_dp_dpcd_set_powered(9)
• drm_dp_dpcd_set_probe(9)
• drm_dp_dpcd_read(9)
• drm_dp_dpcd_write(9)
• drm_dp_dpcd_read_link_status(9)
• drm_dp_dpcd_read_phy_link_status(9)
• drm_dp_link_power_up(9)
• drm_dp_link_power_down(9)
• drm_dp_dpcd_write_payload(9)
• drm_dp_dpcd_clear_payload(9)
• drm_dp_dpcd_poll_act_handled(9)
• drm_dp_downstream_is_type(9)
• drm_dp_downstream_is_tmds(9)
• drm_dp_send_real_edid_checksum(9)
• drm_dp_read_dpcd_caps(9)
• drm_dp_read_downstream_info(9)
• drm_dp_downstream_max_dotclock(9)
• drm_dp_downstream_max_tmds_clock(9)
• drm_dp_downstream_min_tmds_clock(9)
• drm_dp_downstream_max_bpc(9)
• drm_dp_downstream_420_passthrough(9)
• drm_dp_downstream_444_to_420_conversion(9)
• drm_dp_downstream_rgb_to_ycbcr_conversion(9)
• drm_dp_downstream_mode(9)
• drm_dp_downstream_id(9)
• drm_dp_downstream_debug(9)
• drm_dp_subconnector_type(9)
• drm_dp_set_subconnector_property(9)
• drm_dp_read_sink_count_cap(9)
• drm_dp_read_sink_count(9)
• drm_dp_remote_aux_init(9)
• drm_dp_aux_init(9)
• drm_dp_aux_register(9)
• drm_dp_aux_unregister(9)
• drm_dp_psr_setup_time(9)
• drm_dp_start_crc(9)
• drm_dp_stop_crc(9)
• drm_dp_read_desc(9)
• drm_dp_dump_lttpr_desc(9)
• drm_dp_dsc_sink_bpp_incr(9)
• drm_dp_dsc_slice_count_to_mask(9)
• drm_dp_dsc_sink_slice_count_mask(9)
• drm_dp_dsc_sink_max_slice_count(9)
• drm_dp_dsc_sink_line_buf_depth(9)
• drm_dp_dsc_sink_supported_input_bpcs(9)
• drm_dp_dsc_sink_max_slice_throughput(9)
• drm_dp_dsc_branch_max_overall_throughput(9)
• drm_dp_dsc_branch_max_line_width(9)
• drm_dp_read_lttpr_common_caps(9)
• drm_dp_read_lttpr_phy_caps(9)
• drm_dp_lttpr_count(9)
• drm_dp_lttpr_max_link_rate(9)
• drm_dp_lttpr_set_transparent_mode(9)
• drm_dp_lttpr_init(9)
• drm_dp_lttpr_max_lane_count(9)
• drm_dp_lttpr_voltage_swing_level_3_supported(9)
• drm_dp_get_phy_test_pattern(9)
• drm_dp_set_phy_test_pattern(9)
• drm_dp_as_sdp_supported(9)
• drm_dp_vsc_sdp_supported(9)
• drm_dp_vsc_sdp_pack(9)
• drm_dp_get_pcon_max_frl_bw(9)
• drm_dp_pcon_frl_prepare(9)
• drm_dp_pcon_is_frl_ready(9)
• drm_dp_pcon_frl_configure_1(9)
• drm_dp_pcon_frl_configure_2(9)
• drm_dp_pcon_reset_frl_config(9)
• drm_dp_pcon_frl_enable(9)
• drm_dp_pcon_hdmi_link_active(9)
• drm_dp_pcon_hdmi_link_mode(9)
• drm_dp_pcon_hdmi_frl_link_error_count(9)
• drm_dp_pcon_pps_default(9)
• drm_dp_pcon_pps_override_buf(9)
• drm_edp_backlight_set_level(9)
• drm_edp_backlight_enable(9)
• drm_edp_backlight_disable(9)
• drm_edp_backlight_init(9)
• drm_panel_dp_aux_backlight(9)
• drm_dp_link_symbol_cycles(9)
• drm_dp_bw_overhead(9)
• drm_dp_bw_channel_coding_efficiency(9)
• drm_dp_max_dprx_data_rate(9)

---

That's the whole scroll, bestie 🫶 This lil' page comes from ./drivers/gpu/drm/display, dated October 2026, and it lives in the Kernel API Manual. Go check those caps and slay 💅✨