📦 linux-manual

82568 pages · page 358 of 413

S (continued)

struct zfcp_scsi_dev(9)zfcp data per SCSI device✨
struct zfcp_unit(9)LUN configured via zfcp sysfs✨
struct zl3073x_chan(9)DPLL channel state✨
struct zl3073x_chip_info(9)chip variant identification✨
struct zl3073x_dev(9)zl3073x device✨
struct zl3073x_dpll(9)ZL3073x DPLL sub-device structure✨
struct zl3073x_dpll_pin(9)DPLL pin✨
struct zl3073x_fw(9)Firmware bundle✨
struct zl3073x_fw_component(9)Firmware component✨
struct zl3073x_hwreg_seq_item(9)HW register write sequence item✨
struct zl3073x_out(9)output state✨
struct zl3073x_pin_props(9)pin properties✨
struct zl3073x_ref(9)input reference state✨
struct zl3073x_synth(9)synthesizer state✨
struct zoned_disk_info(9)Specific properties of a ZBC SCSI device.✨
struct zpa2326_frequency(9)Hardware sampling frequency descriptor✨
struct zpa2326_private(9)Per-device internal private state✨
struct zynq_gpio(9)gpio device private data structure✨
struct zynq_pinctrl(9)driver data✨
struct zynq_pinmux_function(9)a pinmux function✨
struct zynq_platform_data(9)zynq gpio platform data structure✨
struct zynq_pll(9)pll clock✨
struct zynq_qspi(9)Defines qspi driver instance✨
struct zynqmp_clk_divider(9)adjustable divider clock✨
struct zynqmp_clk_gate(9)gating clock✨
struct zynqmp_clk_mux(9)multiplexer clock✨
struct zynqmp_clock(9)Clock✨
struct zynqmp_devinfo(9)Structure for Zynqmp device instance✨
struct zynqmp_disp(9)Display controller✨
struct zynqmp_disp_format(9)Display subsystem format information✨
struct zynqmp_disp_layer(9)Display layer✨
struct zynqmp_disp_layer_dma(9)DMA channel for one data plane of a layer✨
struct zynqmp_disp_layer_info(9)Static layer information✨
struct zynqmp_dma_chan(9)Driver specific DMA channel structure✨
struct zynqmp_dma_desc_ll(9)Hw linked list descriptor✨
struct zynqmp_dma_desc_sw(9)Per Transaction structure✨
struct zynqmp_dma_device(9)DMA device structure✨
struct zynqmp_dp(9)Xilinx DisplayPort core✨
struct zynqmp_dp_config(9)Configuration of DisplayPort from DTS✨
struct zynqmp_dp_link_config(9)Common link config between source and sink✨
struct zynqmp_dp_mode(9)Configured mode of DisplayPort✨
struct zynqmp_dp_test(9)Configuration for test mode✨
struct zynqmp_dp_train_set_priv(9)Private data for train_set debugfs files✨
struct zynqmp_dpsub(9)ZynqMP DisplayPort Subsystem✨
struct zynqmp_dpsub_drm(9)ZynqMP DisplayPort Subsystem DRM/KMS data✨
struct zynqmp_fpga_priv(9)Private data structure✨
struct zynqmp_ipi_mbox(9)Description of a ZynqMP IPI mailbox platform data.✨
struct zynqmp_ipi_mchan(9)Description of a Xilinx ZynqMP IPI mailbox channel✨
struct zynqmp_ipi_message(9)ZynqMP IPI message structure✨
struct zynqmp_ipi_pdata(9)Description of z ZynqMP IPI agent platform data.✨
struct zynqmp_pctrl_group(9)Pin control group info✨
struct zynqmp_pinctrl(9)driver data✨
struct zynqmp_pll(9)PLL clock✨
struct zynqmp_pm_domain(9)Wrapper around struct generic_pm_domain✨
struct zynqmp_pm_event_info(9)event related information✨
struct zynqmp_pm_query_data(9)PM query data✨
struct zynqmp_pm_shutdown_scope(9)Struct for shutdown scope✨
struct zynqmp_pm_work_struct(9)Wrapper for struct work_struct✨
struct zynqmp_pmux_function(9)a pinmux function✨
struct zynqmp_qspi(9)Defines qspi driver instance✨
struct zynqmp_r5_cluster(9)remoteproc cluster's internal data✨
struct zynqmp_r5_core(9)remoteproc core's internal data✨
struct zynqmp_sram_bank(9)sram bank description✨
struct_group(9)Wrap a set of declarations in a mirrored struct✨
struct_group_attr(9)Create a struct_group() with trailing attributes✨
struct_group_tagged(9)Create a struct_group with a reusable tag✨
struct_offset(9)Calculate the offset of a member within a struct✨
struct_size(9)Calculate size of structure with trailing array.✨
struct_size_t(9)Calculate size of structure with trailing flexible array✨
stub_complete(9)completion handler of a usbip urb✨
stub_device_alloc(9)allocate a new stub_device struct✨
stuffed_read_folio(9)Fill in a Linux folio with stuffed file data✨
stw481x_get_pctl_reg(9)get a power control register✨
subbuf_start_reserve(9)reserve bytes at the start of a sub-buffer✨
subdev_8255_cb_init(9)initialize DIO subdevice for driving callback- mapped 8255✨
subdev_8255_io_init(9)initialize DIO subdevice for driving I/O mapped 8255✨
subdev_8255_mm_init(9)initialize DIO subdevice for driving mmio-mapped 8255✨
subdev_8255_regbase(9)get offset of 8255 registers or call-back context✨
submit_bio(9)submit a bio to the block device layer for I/O✨
submit_bio_noacct(9)re-submit a bio to the block device layer for I/O✨
submit_bio_wait(9)submit a bio, and wait until it completes✨
submit_cache_miss_req(9)Submit a backing request when cache data is missing✨
submit_data_vio(9)Submit a data_vio's bio to the storage below along with any bios that have been merged with it.✨
subsys_dev_iter_exit(9)finish iteration✨
subsys_dev_iter_init(9)initialize subsys device iterator✨
subsys_dev_iter_next(9)iterate to the next device✨
subsys_param_cb(9)general callback for a module/cmdline parameter to be evaluated before subsys initcall level✨
subsys_system_register(9)register a subsystem at /sys/devices/system/✨
subsys_virtual_register(9)register a subsystem at /sys/devices/virtual/✨
subvp_drr_schedulable(9)Determine if SubVP + DRR config is schedulable✨
subvp_subvp_admissable(9)Determine if subvp + subvp config is admissible✨
subvp_subvp_schedulable(9)Determine if SubVP + SubVP config is schedulable✨
subvp_validate_static_schedulability(9)Check which SubVP case is calculated and handle static analysis based on the case.✨
subvp_vblank_schedulable(9)Determine if SubVP + VBLANK config is schedulable✨
sugov_iowait_apply(9)Apply the IO boost to a CPU.✨
sugov_iowait_boost(9)Updates the IO boost status of a CPU.✨
sugov_iowait_reset(9)Reset the IO boost status of a CPU.✨
sumo_pm_init_profile(9)Initialize power profiles callback.✨
sun4i_usb_phy_set_squelch_detect(9)Enable/disable squelch detect✨
sun50i_cpufreq_get_efuse(9)Determine speed grade from efuse value✨
sun7i_a20_gmac_clk_setup(9)Setup function for A20/A31 GMAC clock module✨
sun9i_a80_cpus_setup(9)Setup function for a80 cpus composite clk✨
sunrpc_cache_notify(9)send a netlink notification for a cache event✨
sunrpc_cache_requests_count(9)count pending upcall requests✨
sunrpc_cache_requests_snapshot(9)snapshot pending upcall requests✨
sunrpc_get_pool_mode(9)get the current pool_mode for the host✨
sunrpc_nl_cache_flush_doit(9)flush sunrpc caches via netlink✨
sunrpc_nl_ip_map_get_reqs_dumpit(9)dump pending ip_map requests✨
sunrpc_nl_ip_map_set_reqs_doit(9)respond to ip_map requests✨
sunrpc_nl_parse_one_ip_map(9)parse one ip_map entry from netlink✨
sunrpc_nl_parse_one_unix_gid(9)parse one unix_gid entry from netlink✨
sunrpc_nl_unix_gid_get_reqs_dumpit(9)dump pending unix_gid requests✨
sunrpc_nl_unix_gid_set_reqs_doit(9)respond to unix_gid requests✨
sunxi_ccu_get_mmc_timing_mode(9)Get the current MMC clock timing mode✨
sunxi_ccu_set_mmc_timing_mode(9)Configure the MMC clock timing mode✨
sunxi_engine_apply_color_correction(9)Apply the RGB2YUV color correction✨
sunxi_engine_commit(9)commit all changes of the engine✨
sunxi_engine_disable_color_correction(9)Disable the color space correction✨
sunxi_engine_layers_init(9)Create planes (layers) for the engine✨
sunxi_engine_mode_set(9)Inform engine of a new mode✨
sunxi_rsb_device_create(9)allocate and add an RSB device✨
sunxi_rsb_device_unregister(9)unregister an RSB device✨
sunxi_rsb_driver_register(9)Register device driver with RSB core✨
sunxi_rsb_driver_unregister(9)unregister an RSB client driver✨
sunxi_usb_clk_setup(9)Setup function for usb gate clocks✨
super_lock(9)wait for superblock to become ready and lock it✨
Supported input formats and encodings(9)✨
surface3_spi_get_gpio_config(9)Get GPIO config from ACPI/DT✨
survey_child_resources(9)Total all MMIO requirements✨
Survivability Mode(9)✨
suspend_callback(9)Callback to initiate a suspend, registered in vdo_postsuspend().✨
suspend_device_irqs(9)disable all currently enabled interrupt lines✨
suspend_devices_and_enter(9)Suspend devices and enter system sleep state.✨
suspend_enter(9)Make the system enter the given sleep state.✨
suspend_finish(9)Clean up before finishing the suspend sequence.✨
suspend_index(9)Suspend the UDS index prior to draining hash zones.✨
suspend_lock_counter(9)Prevent the lock counter from notifying.✨
suspend_nvs_alloc(9)allocate memory necessary for saving NVS regions✨
suspend_nvs_free(9)free data pages allocated for saving NVS regions✨
suspend_nvs_register(9)register platform NVS memory region to save✨
suspend_nvs_restore(9)restore NVS memory regions✨
suspend_nvs_save(9)save NVS memory regions✨
suspend_prepare(9)Prepare for entering system sleep state.✨
suspend_set_ops(9)Set the global suspend method table.✨
suspend_valid_only_mem(9)Generic memory-only valid callback.✨
svc_addsock(9)add a listener socket to an RPC service✨
svc_auth_flavor(9)return RPC transaction's RPC_AUTH flavor✨
svc_authenticate(9)Initialize an outgoing credential✨
svc_authorise(9)Finalize credentials/verifier and release resources✨
svc_create(9)Create an RPC service✨
svc_create_memory_pool(9)create a memory pool from reserved memory block✨
svc_create_pooled(9)Create an RPC service with pooled threads✨
svc_encode_result_payload(9)mark a range of bytes as a result payload✨
svc_exit_thread(9)finalise the termination of a sunrpc server thread✨
svc_fill_symlink_pathname(9)Construct pathname argument for VFS symlink call✨
svc_find_listener(9)find an RPC transport instance✨
svc_find_xprt(9)find an RPC transport instance✨
svc_get_sh_memory(9)get memory block reserved by secure monitor SW✨
svc_max_payload(9)Return transport-specific limit on the RPC payload✨
svc_new_thread(9)spawn a new thread in the given pool✨
svc_normal_to_secure_shm_thread(9)the function to run in the kthread✨
svc_normal_to_secure_thread(9)the function to run in the kthread✨
SVC_NUM_DATA_IN_FIFO(9)number of struct stratix10_svc_data in the FIFO✨
svc_pa_to_va(9)translate physical address to virtual address✨
svc_pool_for_cpu(9)Select pool to run a thread on this cpu✨
svc_pool_wake_idle_thread(9)Awaken an idle thread in @pool✨
svc_print_addr(9)Format rq_addr field for printing✨
svc_print_xprts(9)Format the transport list for printing✨
svc_proc_name(9)Return RPC procedure name in string form✨
svc_process(9)Execute one RPC transaction✨
svc_process_bc(9)process a reverse-direction RPC request✨
svc_rdma_build_read_chunk(9)Build RDMA Read WQEs to pull one RDMA chunk✨
svc_rdma_build_read_segment(9)Build RDMA Read WQEs to pull one RDMA segment✨
svc_rdma_cc_init(9)Initialize an svc_rdma_chunk_ctxt✨
svc_rdma_cc_release(9)Release resources held by a svc_rdma_chunk_ctxt✨
svc_rdma_check_pull_up(9)Determine whether to use pull-up✨
svc_rdma_cma_handler(9)Handle CM events on client connections✨
svc_rdma_copy_inline_range(9)Copy part of the inline content into pages✨
svc_rdma_destroy_rw_ctxts(9)Free accumulated R/W contexts✨
svc_rdma_encode_read_list(9)Encode RPC Reply's Read chunk list✨
svc_rdma_encode_reply_chunk(9)Encode RPC Reply's Reply chunk✨
svc_rdma_encode_write_chunk(9)Encode one Write chunk✨
svc_rdma_encode_write_list(9)Encode RPC Reply's Write chunk list✨
svc_rdma_encode_write_segment(9)Encode one Write segment✨
svc_rdma_flush_recv_queues(9)Drain pending Receive work✨
svc_rdma_free(9)Release class-specific transport resources✨
svc_rdma_handle_bc_reply(9)Process incoming backchannel Reply✨
svc_rdma_iov_dma_map(9)DMA map an iovec✨
svc_rdma_iov_write(9)Construct RDMA Writes from an iov✨
svc_rdma_listen_handler(9)Handle CM events generated on a listening endpoint✨
svc_rdma_page_dma_map(9)DMA map one page✨
svc_rdma_pages_write(9)Construct RDMA Writes from pages✨
svc_rdma_post_recvs(9)Post initial set of Recv WRs✨
svc_rdma_post_send(9)Post a WR chain to the Send Queue✨
svc_rdma_post_send_err(9)Handle ib_post_send failure✨
svc_rdma_prepare_reply_chunk(9)Construct WR chain for writing the Reply chunk✨
svc_rdma_prepare_write_list(9)Construct WR chain for sending Write list✨
svc_rdma_process_read_list(9)Pull list of Read chunks from the client✨
svc_rdma_pull_up_reply_msg(9)Copy Reply into a single buffer✨
svc_rdma_read_call_chunk(9)Build RDMA Read WQEs to pull a Long Message✨