📦 linux-manual

82568 pages · page 359 of 413

S (continued)

svc_rdma_read_chunk_range(9)Build RDMA Read WRs for portion of a chunk✨
svc_rdma_read_data_item(9)Construct RDMA Reads to pull data item Read chunks✨
svc_rdma_read_multiple_chunks(9)Construct RDMA Reads to pull data item Read chunks✨
svc_rdma_read_special(9)Build RDMA Read WQEs to pull a Long Message✨
svc_rdma_recv_ctxt_get(9)Allocate a recv_ctxt✨
svc_rdma_recv_ctxt_put(9)Return recv_ctxt to free list✨
svc_rdma_recv_ctxts_destroy(9)Release all recv_ctxt's for an xprt✨
svc_rdma_recvfrom(9)Receive an RPC call✨
svc_rdma_release_ctxt(9)Release transport-specific per-rqst resources✨
svc_rdma_reply_chunk_release(9)Release Reply chunk I/O resources✨
svc_rdma_reply_done(9)Reply chunk Write completion handler✨
svc_rdma_result_payload(9)special processing for a result payload✨
svc_rdma_rw_ctx_init(9)Prepare a R/W context for I/O✨
svc_rdma_send_cid_init(9)Initialize a Send Queue completion ID✨
svc_rdma_send_ctxt_get(9)Get a free send_ctxt✨
svc_rdma_send_ctxt_put(9)Queue send_ctxt for deferred release✨
svc_rdma_send_ctxts_destroy(9)Release all send_ctxt's for an xprt✨
svc_rdma_send_ctxts_drain(9)Release completed send_ctxts✨
svc_rdma_send_error_msg(9)Send an RPC/RDMA v1 error response✨
svc_rdma_sendto(9)Transmit an RPC reply✨
svc_rdma_sq_wait(9)Wait for SQ slots using fair queuing✨
svc_rdma_wake_send_waiters(9)manage Send Queue accounting✨
svc_rdma_wc_read_done(9)Handle completion of an RDMA Read ctx✨
svc_rdma_wc_receive(9)Invoked by RDMA provider for each polled Receive WC✨
svc_rdma_wc_send(9)Invoked by RDMA provider for each polled Send WC✨
svc_rdma_write_chunk_release(9)Release Write chunk I/O resources✨
svc_rdma_write_done(9)Write chunk completion✨
svc_rdma_xb_count_sges(9)Count how many SGEs will be needed✨
svc_rdma_xb_dma_map(9)DMA map all segments of an xdr_buf✨
svc_rdma_xb_linearize(9)Copy region of xdr_buf to flat buffer✨
svc_rdma_xb_write(9)Construct RDMA Writes to write an xdr_buf✨
svc_rdma_xdr_decode_req(9)Decode the transport header✨
svc_rdma_xprt_deferred_close(9)Close an RDMA transport (deferred)✨
svc_recv(9)Receive and process the next request on any transport✨
svc_reg_xprt_class(9)Register a server-side RPC transport class✨
svc_register(9)register an RPC service with the local portmapper✨
svc_reserve(9)change the space reserved for the reply to a request.✨
svc_rqst_page_release(9)release a page associated with an RPC transaction✨
svc_rqst_release_pages(9)Release Reply buffer pages✨
svc_rqst_replace_page(9)Replace one page in rq_respages[]✨
svc_send(9)Return reply to client✨
svc_serv_maxpages(9)maximum count of pages needed for one RPC message✨
svc_serv_maxthreads(9)report a service's configured thread ceiling✨
svc_serv_nrpools(9)number of thread pools backing a service✨
svc_set_client(9)Assign an appropriate 'auth_domain' as the client✨
svc_set_num_threads(9)adjust number of threads in serv✨
svc_set_pool_threads(9)adjust number of threads per pool✨
svc_smccc_1_2_full(9)SMC/HVC v1.2 call matching the sync channel method✨
svc_smccc_hvc(9)hypervisor call between normal and secure world✨
svc_smccc_smc(9)secure monitor call between normal and secure world✨
svc_stat_alloc_counts(9)allocate per-netns per-version call count arrays✨
svc_stat_free_counts(9)free per-netns per-version call count arrays✨
svc_tcp_handshake(9)Perform a transport-layer security handshake✨
svc_tcp_handshake_done(9)Handshake completion handler✨
svc_tcp_recvfrom(9)Receive data from a TCP socket✨
svc_tcp_release_ctxt(9)Release transport-related resources✨
svc_tcp_sendto(9)Send out a reply on a TCP socket✨
svc_thread_cmd_config_status(9)check configuration status✨
svc_thread_cmd_data_claim(9)claim back buffer from the secure world✨
svc_thread_init_status(9)report whether thread has initialised successfully✨
svc_thread_recv_status_ok(9)handle the successful status✨
svc_thread_should_stop(9)check if this thread should stop✨
svc_udp_recvfrom(9)Receive a datagram from a UDP socket.✨
svc_udp_release_ctxt(9)Release transport-related resources✨
svc_udp_sendto(9)Send out a reply on a UDP socket✨
svc_unreg_xprt_class(9)Unregister a server-side RPC transport class✨
svc_wake_up(9)Wake up a service thread for non-transport work✨
svc_xprt_close(9)Close a client connection✨
svc_xprt_create(9)Add a new listener to @serv✨
svc_xprt_create_from_sa(9)Add a new listener to @serv from socket address✨
svc_xprt_deferred_close(9)Close a transport✨
svc_xprt_destroy_all(9)Destroy transports associated with @serv✨
svc_xprt_enqueue(9)Queue a transport on an idle nfsd thread✨
svc_xprt_names(9)format a buffer with a list of transport names✨
svc_xprt_received(9)start next receiver thread✨
svcauth_gss_accept(9)Decode and validate incoming RPC_AUTH_GSS credential✨
svcauth_gss_release(9)Wrap payload and release resources✨
svcauth_map_clnt_to_svc_cred_local(9)maps a generic cred to a svc_cred suitable for use in nfsd.✨
svcauth_null_accept(9)Decode and validate incoming RPC_AUTH_NULL credential✨
svcauth_tls_accept(9)Decode and validate incoming RPC_AUTH_TLS credential✨
svcauth_unix_accept(9)Decode and validate incoming RPC_AUTH_SYS credential✨
svcxdr_decode_fhandle(9)Decode an NFSv2 file handle✨
svcxdr_decode_nfs_fh3(9)Decode an NFSv3 file handle✨
svcxdr_encode_fattr(9)Encode NFSv2 file attributes✨
svcxdr_encode_nfsstat3(9)Encode an NFSv3 status code✨
svcxdr_encode_opaque_pages(9)Insert pages into an xdr_stream✨
svcxdr_encode_post_op_attr(9)Encode NFSv3 post-op attributes✨
svcxdr_encode_stat(9)Encode an NFSv2 status code✨
svcxdr_init_decode(9)Prepare an xdr_stream for Call decoding✨
svcxdr_init_encode(9)Prepare an xdr_stream for svc Reply encoding✨
svcxdr_set_accept_stat(9)Reserve space for the accept_stat field✨
svcxdr_set_auth_slack(9)✨
svcxdr_tmpalloc(9)allocate memory to be freed after compound processing✨
svia_tf_load(9)send taskfile registers to host controller✨
svm_default_granularity (uint)(9)✨
svm_migrate_copy_done(9)wait for memory copy sdma is done✨
svm_migrate_copy_memory_gart(9)sdma copy data between ram and vram✨
svm_migrate_ram_to_vram(9)migrate svm range from system to device✨
svm_migrate_to_ram(9)CPU page fault handler✨
svm_migrate_vma_to_ram(9)migrate range inside one vma from device to system✨
svm_migrate_vram_to_ram(9)migrate svm range from device to system✨
svm_migrate_vram_to_vram(9)migrate svm range from device to device✨
svm_range_add(9)add svm range and handle overlap✨
svm_range_add_to_svms(9)add svm range to svms✨
svm_range_best_prefetch_location(9)decide the best prefetch location✨
svm_range_check_vm(9)check if virtual address range mapped already✨
svm_range_cpu_invalidate_pagetables(9)interval notifier callback✨
svm_range_debug_dump(9)print all range information from svms✨
svm_range_evict(9)evict svm range✨
svm_range_from_addr(9)find svm range from fault address✨
svm_range_is_valid(9)check if virtual address range is valid✨
svm_range_list_lock_and_flush_work(9)flush pending deferred work✨
svm_range_split(9)split a range in 2 ranges✨
svm_range_split_adjust(9)split range and adjust✨
svm_range_unlink(9)unlink svm_range from lists and interval tree✨
svsm_vtpm_cmd_request_fill(9)Fill a TPM_SEND_COMMAND request to be sent to SVSM✨
svsm_vtpm_cmd_response_parse(9)Parse a TPM_SEND_COMMAND response received from SVSM✨
sw842_compress(9)✨
sw842_decompress(9)✨
sw_block_addr(9)block certain packets from the host port✨
sw_cfg(9)set switch register bits✨
sw_cfg_broad_storm(9)configure broadcast storm threshold✨
sw_cfg_port_base_vlan(9)configure port-based VLAN membership✨
sw_cfg_port_based(9)configure switch port based priority✨
sw_cfg_replace_null_vid(9)✨
sw_cfg_replace_vid(9)enable switch 802.10 priority re-mapping✨
sw_chk(9)check switch register bits✨
sw_clr_sta_mac_table(9)clear static MAC table✨
sw_dis_802_1p(9)disable switch 802.1p priority✨
sw_dis_broad_storm(9)disable broadstorm✨
sw_dis_diffserv(9)disable switch DiffServ priority✨
sw_dis_multi_queue(9)disable transmit multiple queues✨
sw_dis_prio_rate(9)disable switch priority rate✨
sw_ena_broad_storm(9)enable broadcast storm✨
sw_enable(9)enable the switch✨
sw_get_broad_storm(9)get broadcast storm threshold✨
sw_init_broad_storm(9)initialize broadcast storm✨
sw_init_prio(9)initialize switch priority✨
sw_init_prio_rate(9)initialize switch priority rate✨
sw_init_stp(9)initialize switch spanning tree support✨
sw_init_vlan(9)initialize switch VLAN✨
sw_r_table(9)read 4 bytes of data from switch table✨
sw_r_vlan_table(9)read from the VLAN table✨
sw_set_addr(9)configure switch MAC address✨
sw_set_global_ctrl(9)set switch global control✨
sw_setup(9)setup the switch✨
sw_w_sta_mac_table(9)write to the static MAC table✨
sw_w_table_64(9)write 8 bytes of data to the switch table✨
swait_active(9)- locklessly test for waiters on the queue✨
swait_event_idle_exclusive(9)wait without system load contribution✨
swait_event_idle_timeout_exclusive(9)wait up to timeout without load contribution✨
swap(9)swap values of @a and @b✨
swap_alloc_hibernation_slot(9)Allocate a swap slot for hibernation.✨
swap_buf_le16(9)swap halves of 16-bit words in place✨
swap_bytes(9)swap two elements a byte at a time✨
swap_cache_alloc_folio(9)Allocate folio for swapped out slot in swap cache.✨
swap_cache_del_folio(9)Removes a folio from the swap cache.✨
swap_cache_get_folio(9)Looks up a folio in the swap cache.✨
swap_cache_get_shadow(9)Looks up a shadow in the swap cache.✨
swap_cache_has_folio(9)Check if a swap slot has cache.✨
swap_cluster_lock(9)Lock and return the swap cluster of given offset.✨
swap_cluster_readahead(9)swap in pages in hope we need them soon✨
swap_dup_entries_cluster(9)Increase the swap count of slots within one cluster.✨
swap_entry_swapped(9)Check if the swap entry is swapped.✨
swap_free_hibernation_slot(9)Free a swap slot allocated for hibernation.✨
swap_pte_batch(9)detect a PTE batch for a set of contiguous swap entries✨
swap_put_entries_cluster(9)Decrease the swap count of slots within one cluster✨
swap_put_entries_direct(9)Release reference on range of swap entries and reclaim their cache if no more references remain.✨
swap_update_readahead(9)Update the readahead statistics of VMA or globally.✨
swap_uv_columns(9)Swap u and v column of a given matrix✨
swap_vma_readahead(9)swap in pages in hope we need them soon✨
swap_words_32(9)swap two elements in 32-bit chunks✨
swap_words_64(9)swap two elements in 64-bit chunks✨
swapin_readahead(9)swap in pages in hope we need them soon✨
swapin_sync(9)swap-in one or multiple entries skipping readahead.✨
sweep_bh_for_rgrps(9)find an rgrp in a meta buffer and free blocks therein✨
swiotlb_adjust_nareas(9)adjust the number of areas and slots✨
swiotlb_align_offset(9)Get required offset into an IO TLB allocation.✨
swiotlb_alloc_pool(9)allocate a new IO TLB memory pool✨
swiotlb_alloc_tlb(9)allocate a dynamic IO TLB buffer✨
swiotlb_del_pool(9)remove an IO TLB pool from a device✨
swiotlb_del_transient(9)delete a transient memory pool✨
swiotlb_dev_init(9)initialize swiotlb fields in &struct device✨
swiotlb_dyn_alloc(9)dynamic memory pool allocation worker✨
swiotlb_find_pool(9)find swiotlb pool to which a physical address belongs✨
swiotlb_find_slots(9)search for slots in the whole swiotlb✨
swiotlb_free_tlb(9)free a dynamically allocated IO TLB buffer✨
swiotlb_search_area(9)search one memory area in all pools✨
swiotlb_search_pool_area(9)search one memory area in one pool✨
swiotlb_tbl_map_single(9)bounce buffer map a single contiguous physical area✨
switch_gc_head(9)switch the garbage collection journal head.✨
switch_gdt_and_percpu_base(9)Switch to direct GDT and runtime per CPU base✨
switch_leds(9)switch the leds, go from one site to the other.✨
switchdev_deferred_process(9)Process ops in deferred queue✨
switchdev_port_attr_set(9)Set port attribute✨
switchdev_port_obj_act_is_deferred(9)Is object action pending?✨
switchdev_port_obj_add(9)Add port object✨
switchdev_port_obj_del(9)Delete port object✨
swnode_gpio_count(9)count the GPIOs associated with a device / function✨
swphy_read_reg(9)return a MII register from the fixed phy state✨