📦 linux-manual

82568 pages · page 296 of 413

S (continued)

snd_soc_find_dai_link(9)Find a DAI link✨
snd_soc_free_ac97_component(9)free AC97 component device✨
snd_soc_get_enum_double(9)enumerated double mixer get callback✨
snd_soc_get_strobe(9)strobe get callback✨
snd_soc_get_volsw(9)single mixer get callback with range✨
snd_soc_get_volsw_sx(9)single mixer get callback✨
snd_soc_get_xr_sx(9)signed multi register get callback✨
snd_soc_info_enum_double(9)enumerated double mixer info callback✨
snd_soc_info_volsw(9)single mixer info callback with range.✨
snd_soc_info_volsw_sx(9)Mixer info callback for SX TLV controls✨
snd_soc_info_xr_sx(9)signed multi register info callback✨
snd_soc_jack_add_gpiods(9)Associate GPIO descriptor pins with an ASoC jack✨
snd_soc_jack_add_gpios(9)Associate GPIO pins with an ASoC jack✨
snd_soc_jack_add_pins(9)Associate DAPM pins with an ASoC jack✨
snd_soc_jack_add_zones(9)Associate voltage zones with jack✨
snd_soc_jack_free_gpios(9)Release GPIO pins' resources of an ASoC jack✨
snd_soc_jack_get_type(9)Based on the mic bias value, this function returns the type of jack from the zones declared in the jack type✨
snd_soc_jack_notifier_register(9)Register a notifier for jack status✨
snd_soc_jack_notifier_unregister(9)Unregister a notifier for jack status✨
snd_soc_jack_report(9)Report the current status for a jack✨
snd_soc_limit_volume(9)Set new limit to an existing volume control.✨
snd_soc_new_ac97_component(9)initailise AC97 device✨
snd_soc_new_compress(9)create a new compress.✨
snd_soc_put_enum_double(9)enumerated double mixer put callback✨
snd_soc_put_strobe(9)strobe put callback✨
snd_soc_put_volsw(9)single mixer put callback with range✨
snd_soc_put_volsw_sx(9)double mixer set callback✨
snd_soc_put_xr_sx(9)signed multi register get callback✨
snd_soc_register_card(9)Register a card with the ASoC core✨
snd_soc_register_dai(9)Register a DAI dynamically & create its widgets✨
snd_soc_register_dais(9)Register a DAI with the ASoC core✨
snd_soc_remove_pcm_runtime(9)Remove a pcm_runtime from card✨
snd_soc_runtime_action(9)Increment/Decrement active count for PCM runtime components✨
snd_soc_runtime_calc_hw(9)Calculate hw limits for a PCM stream✨
snd_soc_runtime_ignore_pmdown_time(9)Check whether to ignore the power down delay✨
snd_soc_runtime_set_dai_fmt(9)Change DAI link format for a ASoC runtime✨
snd_soc_set_ac97_ops_of_reset(9)Set ac97 ops with generic ac97 reset functions✨
snd_soc_set_dmi_name(9)Register DMI names to card✨
snd_soc_tdm_params_to_bclk(9)calculate bclk from params and tdm slot info.✨
snd_soc_unregister_card(9)Unregister a card with the ASoC core✨
snd_soc_unregister_component_by_driver(9)Unregister component using a given driver from the ASoC core✨
snd_soc_unregister_dais(9)Unregister DAIs from the ASoC core✨
snd_soc_usb_add_port(9)Add a USB backend port✨
snd_soc_usb_allocate_port(9)allocate a SoC USB port for offloading support✨
snd_soc_usb_connect(9)Notification of USB device connection✨
snd_soc_usb_disconnect(9)Notification of USB device disconnection✨
snd_soc_usb_find_priv_data(9)Retrieve private data stored✨
snd_soc_usb_find_supported_format(9)Check if audio format is supported✨
snd_soc_usb_free_port(9)free a SoC USB port used for offloading support✨
snd_soc_usb_remove_port(9)Remove a USB backend port✨
snd_soc_usb_setup_offload_jack(9)Create USB offloading jack✨
snd_soc_usb_update_offload_route(9)Find active USB offload path✨
snd_soc_xlate_tdm_slot_mask(9)generate tx/rx slot mask.✨
snd_sof_dsp_get_bar_index(9)Maps a section type with a BAR index✨
snd_sof_dsp_panic(9)handle a received DSP panic message✨
snd_ump_block_new(9)Create a UMP block✨
snd_ump_convert_from_ump(9)convert from UMP to legacy MIDI✨
snd_ump_convert_to_ump(9)convert legacy MIDI byte to UMP packet✨
snd_ump_endpoint_new(9)create a UMP Endpoint object✨
snd_ump_parse_endpoint(9)parse endpoint and create function blocks✨
snd_ump_receive(9)transfer UMP packets from the device✨
snd_ump_receive_ump_val(9)parse the UMP packet data✨
snd_ump_switch_protocol(9)switch MIDI protocol✨
snd_ump_transmit(9)transmit UMP packets✨
snd_unregister_device(9)unregister the device on the given card✨
snd_usb_add_endpoint(9)Add an endpoint to an USB audio chip✨
snd_usb_endpoint_free_all(9)Free the resources of an snd_usb_endpoint✨
snd_usb_endpoint_implicit_feedback_sink(9)Report endpoint usage type✨
snd_usb_endpoint_release(9)Tear down an snd_usb_endpoint✨
snd_usb_endpoint_start(9)start an snd_usb_endpoint✨
snd_usb_endpoint_stop(9)stop an snd_usb_endpoint✨
snd_usb_offload_create_ctl(9)Add USB offload bounded mixer✨
snd_vx_create(9)constructor for struct vx_core✨
snd_vx_dsp_boot(9)load the DSP boot✨
snd_vx_dsp_load(9)load the DSP image✨
snd_vx_irq_handler(9)interrupt handler✨
snd_vx_load_boot_image(9)boot up the xilinx interface✨
snd_vxpocket_assign_resources(9)initialize the hardware and card instance.✨
snp_svsm_vtpm_probe(9)Probe if SVSM provides a vTPM device✨
snp_svsm_vtpm_send_command(9)Execute a vTPM operation on SVSM✨
snprintf(9)Format a string and place it in a buffer✨
soc15_program_register_sequence(9)program an array of registers.✨
soc64_async_callback(9)Callback from Intel service layer for async requests✨
soc_attr_read_machine(9)retrieve the machine model and store it in the soc_device_attribute structure✨
soc_device_register(9)register SoC as a device✨
soc_device_to_device(9)helper function to fetch struct device✨
soc_device_unregister(9)unregister SoC device✨
soc_tplg_dai_config(9)Find and configure an existing physical DAI.✨
sock_alloc(9)allocate a socket✨
sock_alloc_file(9)Bind a &socket to a &file✨
SOCK_CONNECT_BIND(9)&sock->sk_userlocks flag for auto-bind at connect() time✨
sock_create(9)creates a socket✨
sock_create_kern(9)creates a socket (kernel space)✨
sock_create_lite(9)creates a socket✨
sock_from_file(9)Return the &socket bounded to @file.✨
sock_poll_wait(9)wrapper for the poll_wait call.✨
sock_read_xattr(9)read a user.* xattr from a socket's sockfs inode✨
sock_recvmsg(9)receive a message from @sock✨
sock_register(9)add a socket protocol handler✨
sock_release(9)close a socket✨
sock_sendmsg(9)send a message through @sock✨
sock_unregister(9)remove a protocol handler✨
sockaddr_to_str(9)convert sockaddr to a string.✨
sockfd_lookup(9)Go from a file number to its socket slot✨
socrates_nand_read_buf(9)read chip data into buffer✨
socrates_nand_read_byte(9)read one byte from the chip✨
socrates_nand_write_buf(9)write buffer to chip✨
soctherm_edp_isr(9)Disables any active interrupts✨
soctherm_edp_isr_thread(9)log an over-current interrupt request✨
soctherm_handle_alarm(9)Handles soctherm alarms✨
soctherm_init_hw_throt_cdev(9)Parse the HW throttle configurations and register them as cooling devices.✨
soctherm_irq_domain_xlate_twocell(9)xlate for soctherm interrupts✨
soctherm_oc_int_init(9)Initial enabling of the over current interrupts✨
soctherm_oc_intr_enable(9)Enables the soctherm over-current interrupt✨
soctherm_oc_irq_disable(9)Disables overcurrent interrupt requests✨
soctherm_oc_irq_enable(9)Enables the SOC_THERM over-current interrupt queue✨
soctherm_oc_irq_lock(9)locks the over-current interrupt request✨
soctherm_oc_irq_map(9)SOC_THERM interrupt request domain mapper✨
soctherm_oc_irq_sync_unlock(9)Unlocks the OC interrupt request✨
soctherm_thermal_isr_thread(9)Handles a thermal interrupt request✨
soctherm_throttle_program(9)programs pulse skippers' configuration✨
sof_comp_alloc(9)allocate and initialize buffer for a new component✨
sof_copy_tuples(9)Parse tokens and copy them to the @tuples array✨
sof_debug_check_flag(9)check if a given flag(s) is set in sof_core_debug✨
sof_ipc4_complete_split_release(9)loads the library parts of a split firmware✨
sof_ipc4_get_audio_fmt(9)get available audio formats from swidget->tuples✨
sof_ipc4_probe_get_module_info(9)Get IPC4 module info for probe module✨
sof_ipc4_update_cpc_from_manifest(9)Update the cpc in base config from manifest✨
sof_ipc_send_msg(9)generic function to prepare and send one IPC message✨
sof_parse_string_tokens(9)Parse multiple sets of tokens✨
sof_parse_token_sets(9)Parse multiple sets of tokens✨
sof_parse_tokens(9)Parse one set of tokens✨
sof_parse_uuid_tokens(9)Parse multiple sets of UUID tokens✨
sof_parse_word_tokens(9)Parse multiple sets of tokens✨
sof_print_oops_and_stack(9)Handle the printing of DSP oops and stack trace✨
sof_set_widget_pipeline(9)Set pipeline for a component✨
sof_update_ipc_object(9)Parse multiple sets of tokens within the token array associated with the token ID.✨
soft_offline_page(9)Soft offline a page.✨
soft_reset_ready_check(9)Function to check FW is ready for soft reset.✨
softleaf_entry_wait_on_locked(9)Wait for a migration entry or device_private entry to be removed.✨
softleaf_from_pmd(9)Obtain a leaf entry from a PMD entry.✨
softleaf_from_pte(9)Obtain a leaf entry from a PTE entry.✨
softleaf_has_pfn(9)Does this leaf entry encode a valid PFN number?✨
softleaf_is_device_exclusive(9)Is this leaf entry a device-exclusive entry?✨
softleaf_is_device_private(9)Is this leaf entry a device private entry?✨
softleaf_is_device_private_write(9)Is this leaf entry a device private writable entry?✨
softleaf_is_guard_marker(9)Is this leaf entry a guard region marker?✨
softleaf_is_hwpoison(9)Is this leaf entry a hardware poison entry?✨
softleaf_is_marker(9)Is this leaf entry a marker?✨
softleaf_is_migration(9)Is this leaf entry a migration entry?✨
softleaf_is_migration_dirty(9)Does this migration entry contain a dirty bit?✨
softleaf_is_migration_read(9)Is this leaf entry a readable migration entry?✨
softleaf_is_migration_read_exclusive(9)Is this leaf entry an exclusive readable migration entry?✨
softleaf_is_migration_write(9)Is this leaf entry a writable migration entry?✨
softleaf_is_migration_young(9)Does this migration entry contain an accessed bit?✨
softleaf_is_none(9)Is the leaf entry empty?✨
softleaf_is_poison_marker(9)Is this leaf entry a poison marker?✨
softleaf_is_swap(9)Is this leaf entry a swap entry?✨
softleaf_is_uffd_wp_marker(9)Is this leaf entry a userfautlfd write protect marker?✨
softleaf_is_valid_pmd_entry(9)Is the specified softleaf entry obtained from a PMD one that we support at PMD level?✨
softleaf_mk_none(9)Create an empty ('none') leaf entry.✨
softleaf_t(9)Describes a page table software leaf entry, abstracted from its architecture-specific encoding.✨
softleaf_to_folio(9)Obtains struct folio for PFN encoded within leaf entry.✨
softleaf_to_marker(9)Obtain marker associated with leaf entry.✨
softleaf_to_page(9)Obtains struct page for PFN encoded within leaf entry.✨
softleaf_to_pfn(9)Obtain PFN encoded within leaf entry.✨
softleaf_to_pmd(9)Obtain a PMD entry from a leaf entry.✨
softleaf_to_pte(9)Obtain a PTE entry from a leaf entry.✨
softleaf_type(9)Identify the type of leaf entry.✨
Software description(9)✨
software_node_find_by_name(9)Find software node by name✨
software_node_register(9)Register static software node✨
software_node_register_node_group(9)Register a group of software nodes✨
software_node_unregister(9)Unregister static software node✨
software_node_unregister_node_group(9)Unregister a group of software nodes✨
software_resume_initcall(9)Resume from a saved hibernation image.✨
sort_by_max_size(9)sort nodes on the list by their length, largest first.✨
sort_by_size(9)sort nodes on the list by their length, smallest first.✨
sort_memory_ranges(9)Sorts the given memory ranges list.✨
sort_nodes(9)sort nodes for GC.✨
sort_pacl_range(9)sort a range of POSIX ACL entries by tag and id✨
sort_r(9)sort an array of elements✨
sort_r_nonatomic(9)sort an array of elements, with cond_resched✨
source_copy_blit(9)BLIT transfer operation✨
sp_alloc_struct(9)allocate and initialize the sp_device struct✨
space_valid(9)validate free dpa space against constraints✨
spansion_nor_clear_sr(9)Clear the Status Register.✨
spansion_nor_sr_ready_and_clear(9)Query the Status Register to see if the flash is ready for new commands and clear it if there are any errors.✨
sparse_add_section(9)add a memory section, or populate an existing one✨
sparse_keymap_entry_from_keycode(9)perform sparse keymap lookup✨
sparse_keymap_entry_from_scancode(9)perform sparse keymap lookup✨
sparse_keymap_report_entry(9)report event corresponding to given key entry✨
sparse_keymap_report_event(9)report event corresponding to given scancode✨
sparse_keymap_setup(9)set up sparse keymap for an input device✨
Spatial multiplexing power save(9)✨
spear_mtd_erase(9)perform flash erase operation as requested by user✨
spear_mtd_read(9)performs flash read operation as requested by the user✨
spear_mtd_write(9)performs write operation as requested by the user.✨
spear_smi_erase_sector(9)erase one sector of flash✨
spear_smi_hw_init(9)initializes the smi controller.✨