📦 linux-manual

82568 pages · page 294 of 413

S (continued)

snd_hda_mixer_amp_volume_put(9)Put callback for a standard AMP mixer volume✨
snd_hda_multi_out_analog_cleanup(9)clean up the setting for analog out✨
snd_hda_multi_out_analog_open(9)open analog outputs✨
snd_hda_multi_out_analog_prepare(9)Preapre the analog outputs.✨
snd_hda_multi_out_dig_cleanup(9)clean-up the digital out stream✨
snd_hda_multi_out_dig_close(9)release the digital out stream✨
snd_hda_multi_out_dig_open(9)open the digital out in the exclusive mode✨
snd_hda_multi_out_dig_prepare(9)prepare the digital out stream✨
snd_hda_override_amp_caps(9)Override the AMP capabilities✨
snd_hda_override_conn_list(9)add/modify the connection-list to cache✨
snd_hda_override_pin_caps(9)Override the pin capabilities✨
snd_hda_pick_fixup(9)Pick up a fixup matching with PCI/codec SSID or model string✨
snd_hda_pick_pin_fixup(9)Pick up a fixup matching with the pin quirk list✨
snd_hda_query_pin_caps(9)Query PIN capabilities✨
snd_hda_sequence_write(9)sequence writes✨
snd_hda_set_dev_select(9)set device entry select on the pin✨
snd_hda_set_pin_ctl(9)Set a pin-control value safely✨
snd_hda_set_pin_ctl_cache(9)Set a pin-control value safely✨
snd_hda_set_power_save(9)reprogram autosuspend for the given delay✨
snd_hda_set_vmaster_tlv(9)Set TLV for a virtual master control✨
snd_hda_shutup_pins(9)Shut up all pins✨
snd_hda_spdif_ctls_assign(9)Assign the SPDIF controls to the given NID✨
snd_hda_spdif_ctls_unassign(9)Unassign the given SPDIF ctl✨
snd_hda_spdif_out_of_nid(9)get the hda_spdif_out entry from the given NID✨
snd_hda_sync_vmaster_hook(9)Sync vmaster hook✨
snd_hda_unlock_devices(9)pseudo device unlocking✨
snd_hdac_acomp_exit(9)Finalize audio component✨
snd_hdac_acomp_get_eld(9)Get the audio state and ELD via component✨
snd_hdac_acomp_init(9)Initialize audio component✨
snd_hdac_acomp_register_notifier(9)Register audio component ops✨
snd_hdac_apl_host_stream_setup(9)Setup a HOST stream following procedure recommended for ApolloLake devices.✨
snd_hdac_bus_add_device(9)Add a codec to bus✨
snd_hdac_bus_alloc_stream_pages(9)allocate BDL and other buffers✨
snd_hdac_bus_enter_link_reset(9)enter link reset✨
snd_hdac_bus_exec_verb(9)execute a HD-audio verb on the given bus✨
snd_hdac_bus_exec_verb_unlocked(9)unlocked version✨
snd_hdac_bus_exit(9)clean up a HD-audio bas bus✨
snd_hdac_bus_exit_link_reset(9)exit link reset✨
snd_hdac_bus_free_stream_pages(9)release BDL and other buffers✨
snd_hdac_bus_get_response(9)receive a response via RIRB or PIO✨
snd_hdac_bus_get_response_pio(9)receive a response via Immediate Response✨
snd_hdac_bus_get_response_rirb(9)receive a response via RIRB✨
snd_hdac_bus_handle_stream_irq(9)interrupt handler for streams✨
snd_hdac_bus_init(9)initialize a HD-audio bas bus✨
snd_hdac_bus_init_chip(9)reset and start the controller registers✨
snd_hdac_bus_init_cmd_io(9)set up CORB/RIRB buffers✨
snd_hdac_bus_link_power(9)power up/down codec link✨
snd_hdac_bus_parse_capabilities(9)parse capability structure✨
snd_hdac_bus_queue_event(9)add an unsolicited event to queue✨
snd_hdac_bus_remove_device(9)Remove a codec from bus✨
snd_hdac_bus_send_cmd(9)send a command verb via CORB or PIO✨
snd_hdac_bus_send_cmd_corb(9)send a command verb via CORB✨
snd_hdac_bus_send_cmd_pio(9)send a command verb via Immediate Command✨
snd_hdac_bus_stop_chip(9)disable the whole IRQ and I/Os✨
snd_hdac_bus_stop_cmd_io(9)clean up CORB/RIRB buffers✨
snd_hdac_bus_update_rirb(9)retrieve RIRB entries✨
snd_hdac_check_power_state(9)check whether the actual power state matches with the target state✨
snd_hdac_codec_modalias(9)give the module alias name✨
snd_hdac_codec_read(9)send a command and get the response✨
snd_hdac_codec_write(9)send a single command without waiting for response✨
snd_hdac_device_exit(9)clean up the HD-audio codec base device✨
snd_hdac_device_init(9)initialize the HD-audio codec base device✨
snd_hdac_device_register(9)register the hd-audio codec base device✨
snd_hdac_device_set_chip_name(9)set/update the codec name✨
snd_hdac_device_unregister(9)unregister the hd-audio codec base device✨
snd_hdac_display_power(9)Power up / down the power refcount✨
snd_hdac_dsp_cleanup(9)clean up the stream from DSP loading to normal✨
snd_hdac_dsp_prepare(9)prepare for DSP loading✨
snd_hdac_dsp_trigger(9)start / stop DSP loading✨
snd_hdac_exec_verb(9)execute an encoded verb✨
snd_hdac_ext_bus_device_remove(9)remove HD-audio extended codec base devices✨
snd_hdac_ext_bus_exit(9)clean up a HD-audio extended bus✨
snd_hdac_ext_bus_get_hlink_by_addr(9)get hlink at specified address✨
snd_hdac_ext_bus_get_hlink_by_name(9)get hlink based on codec name✨
snd_hdac_ext_bus_get_ml_capabilities(9)get multilink capability✨
snd_hdac_ext_bus_init(9)initialize a HD-audio extended bus✨
snd_hdac_ext_bus_link_clear_stream_id(9)maps stream id to link output✨
snd_hdac_ext_bus_link_power_down(9)power down hda link✨
snd_hdac_ext_bus_link_power_down_all(9)power down all hda link✨
snd_hdac_ext_bus_link_power_up(9)power up hda link✨
snd_hdac_ext_bus_link_power_up_all(9)power up all hda link✨
snd_hdac_ext_bus_link_set_stream_id(9)maps stream id to link output✨
snd_hdac_ext_bus_ppcap_enable(9)enable/disable processing pipe capability✨
snd_hdac_ext_bus_ppcap_int_enable(9)ppcap interrupt enable/disable✨
snd_hdac_ext_cstream_assign(9)assign a host stream for compress✨
snd_hdac_ext_host_stream_setup(9)Setup a HOST stream.✨
snd_hdac_ext_link_free_all(9)free hdac extended link objects✨
snd_hdac_ext_stream_assign(9)assign a stream for the PCM✨
snd_hdac_ext_stream_clear(9)stop a stream DMA✨
snd_hdac_ext_stream_decouple(9)decouple the hdac stream✨
snd_hdac_ext_stream_free_all(9)free hdac extended stream objects✨
snd_hdac_ext_stream_init(9)initialize each stream (aka device)✨
snd_hdac_ext_stream_init_all(9)create and initialize the stream objects for an extended hda bus✨
snd_hdac_ext_stream_release(9)release the assigned stream✨
snd_hdac_ext_stream_reset(9)reset a stream✨
snd_hdac_ext_stream_setup(9)set up the SD for streaming✨
snd_hdac_ext_stream_start(9)start a stream✨
snd_hdac_get_connections(9)get a widget connection list✨
snd_hdac_get_stream(9)return hdac_stream based on stream_tag and direction✨
snd_hdac_get_stream_stripe_ctl(9)get stripe control value✨
snd_hdac_get_sub_nodes(9)get start NID and number of subtree nodes✨
snd_hdac_i915_init(9)Initialize i915 audio component✨
snd_hdac_i915_set_bclk(9)Reprogram BCLK for HSW/BDW✨
snd_hdac_is_supported_format(9)Check the validity of the format✨
snd_hdac_make_cmd(9)compose a 32bit command word to be sent to the HD- audio controller✨
snd_hdac_override_parm(9)override read-only parameters✨
snd_hdac_power_down(9)power down the codec✨
snd_hdac_power_down_pm(9)power down the codec✨
snd_hdac_power_up(9)power up the codec✨
snd_hdac_power_up_pm(9)power up the codec✨
snd_hdac_query_supported_pcm(9)query the supported PCM rates and formats✨
snd_hdac_read(9)execute a verb✨
snd_hdac_read_parm(9)read a codec parameter✨
snd_hdac_read_parm_uncached(9)read a codec parameter without caching✨
snd_hdac_refresh_widgets(9)Reset the widget start/end nodes✨
snd_hdac_regmap_add_vendor_verb(9)add a vendor-specific verb to regmap✨
snd_hdac_regmap_encode_amp(9)encode the AMP verb to a pseudo register✨
snd_hdac_regmap_encode_amp_stereo(9)encode a pseudo register for stereo AMPs✨
snd_hdac_regmap_encode_verb(9)encode the verb to a pseudo register✨
snd_hdac_regmap_exit(9)Release the regmap from HDA codec✨
snd_hdac_regmap_get_amp(9)Read AMP value✨
snd_hdac_regmap_get_amp_stereo(9)Read stereo AMP values✨
snd_hdac_regmap_init(9)Initialize regmap for HDA register accesses✨
snd_hdac_regmap_read(9)Read a verb with caching✨
snd_hdac_regmap_read_raw(9)read a pseudo register with power mgmt✨
snd_hdac_regmap_sync(9)sync out the cached values for PM resume✨
snd_hdac_regmap_sync_node(9)sync the widget node attributes✨
snd_hdac_regmap_update(9)Update a verb value with caching✨
snd_hdac_regmap_update_amp(9)update the AMP value✨
snd_hdac_regmap_update_amp_stereo(9)update the stereo AMP value✨
snd_hdac_regmap_update_raw(9)update a pseudo register with power mgmt✨
snd_hdac_regmap_update_raw_once(9)initialize the register value only once✨
snd_hdac_regmap_write(9)Write a verb with caching✨
snd_hdac_regmap_write_raw(9)write a pseudo register with power mgmt✨
snd_hdac_set_codec_wakeup(9)Enable / disable HDMI/DP codec wakeup✨
snd_hdac_spdif_stream_format(9)convert format parameters to SDxFMT value.✨
snd_hdac_stop_streams(9)stop all streams✨
snd_hdac_stop_streams_and_chip(9)stop all streams and chip if running✨
snd_hdac_stream_assign(9)assign a stream for the PCM✨
snd_hdac_stream_cleanup(9)cleanup a stream✨
snd_hdac_stream_clear(9)helper to clear stream registers and stop DMA transfers✨
snd_hdac_stream_drsm_enable(9)enable DMA resume for a stream✨
snd_hdac_stream_format(9)convert format parameters to SDxFMT value.✨
snd_hdac_stream_format_bits(9)obtain bits per sample value.✨
snd_hdac_stream_init(9)initialize each stream (aka device)✨
snd_hdac_stream_release(9)release the assigned stream✨
snd_hdac_stream_release_locked(9)release the assigned stream✨
snd_hdac_stream_reset(9)reset a stream✨
snd_hdac_stream_set_dpibr(9)sets the dpibr value of a stream✨
snd_hdac_stream_set_lpib(9)sets the lpib value of a stream✨
snd_hdac_stream_set_params(9)set stream parameters✨
snd_hdac_stream_set_spib(9)sets the spib value of a stream✨
snd_hdac_stream_setup(9)set up the SD for streaming✨
snd_hdac_stream_setup_bdle(9)set up BDL entries✨
snd_hdac_stream_setup_periods(9)set up BDL entries✨
snd_hdac_stream_spbcap_enable(9)enable SPIB for a stream✨
snd_hdac_stream_start(9)start a stream✨
snd_hdac_stream_stop(9)stop a stream✨
snd_hdac_stream_sync(9)sync with start/stop trigger operation✨
snd_hdac_stream_sync_trigger(9)turn on/off stream sync register✨
snd_hdac_stream_timecounter_init(9)initialize time counter✨
snd_hdac_sync_audio_rate(9)Set N/CTS based on the sample rate✨
snd_hdac_sync_power_state(9)wait until actual power state matches with the target state✨
snd_hwdep_new(9)create a new hwdep instance✨
snd_hwparams_to_dma_slave_config(9)Convert hw_params to dma_slave_config✨
snd_info_create_card_entry(9)create an info entry for the given card✨
snd_info_create_module_entry(9)create an info entry for the given module✨
snd_info_free_entry(9)release the info entry✨
snd_info_get_line(9)read one line from the procfs buffer✨
snd_info_get_str(9)parse a string token✨
snd_info_register(9)register the info entry✨
snd_interval_div(9)refine the interval value with division✨
snd_interval_list(9)refine the interval value from the list✨
snd_interval_muldivk(9)refine the interval value✨
snd_interval_mulkdiv(9)refine the interval value✨
snd_interval_ranges(9)refine the interval value from the list of ranges✨
snd_interval_ratden(9)refine the interval value✨
snd_interval_ratnum(9)refine the interval value✨
snd_interval_refine(9)refine the interval value of configurator✨
snd_iprintf(9)printf on the procfs buffer✨
snd_jack_add_new_kctl(9)Create a new snd_jack_kctl and add it to jack✨
snd_jack_new(9)Create a new jack✨
snd_jack_report(9)Report the current status of a jack✨
snd_jack_set_key(9)Set a key mapping on a jack✨
snd_lookup_minor_data(9)get user data of a registered device✨
snd_mpu401_uart_interrupt(9)generic MPU401-UART interrupt handler✨
snd_mpu401_uart_interrupt_tx(9)generic MPU401-UART transmit irq handler✨
snd_mpu401_uart_new(9)create an MPU401-UART instance✨
snd_pci_quirk_lookup(9)look up a PCI SSID quirk list✨
snd_pci_quirk_lookup_id(9)look up a PCI SSID quirk list✨
snd_pcm_add_chmap_ctls(9)create channel-mapping control elements✨
snd_pcm_capture_avail(9)Get the available (readable) space for capture✨
snd_pcm_capture_empty(9)check whether the capture buffer is empty✨
snd_pcm_capture_hw_avail(9)Get the free space for capture✨
snd_pcm_capture_ready(9)check whether the capture buffer is available✨
snd_pcm_chmap_substream(9)get the PCM substream assigned to the given chmap info✨
snd_pcm_create_iec958_consumer(9)create consumer format IEC958 channel status✨
snd_pcm_create_iec958_consumer_default(9)create default consumer format IEC958 channel status✨
snd_pcm_create_iec958_consumer_hw_params(9)create IEC958 channel status✨
snd_pcm_direction_name(9)Get a string naming the direction of a stream✨