📦 linux-manual

82568 pages · page 277 of 413

S (continued)

sba_dump_tlb(9)debugging only - print IOMMU operating parameters✨
sba_free(9)free/unmap shared mem for DMA✨
sba_free_range(9)unmark bits in IO PDIR resource bitmap✨
sba_get_iommu(9)Assign the iommu pointer for the pci bus controller.✨
sba_io_pdir_entry(9)fill in one IO PDIR entry✨
sba_map_sg(9)map Scatter/Gather list✨
sba_map_single(9)map one buffer and return IOVA for DMA✨
sba_mark_invalid(9)invalidate one or more IO PDIR entries✨
sba_search_bitmap(9)find free space in IO PDIR resource bitmap✨
sba_unmap_phys(9)unmap one IOVA and free resources✨
sba_unmap_sg(9)unmap Scatter/Gather list✨
sbefifo_submit(9)Submit and SBE fifo command and receive response✨
sbi_console_getchar(9)Reads a byte from console device.✨
sbi_console_putchar(9)Writes given character to the console device.✨
sbi_fwft_set(9)Set a feature on the local hart✨
sbi_fwft_set_cpumask(9)Set a feature for the specified cpumask✨
sbi_fwft_set_online_cpus(9)Set a feature on all online cpus✨
sbi_probe_extension(9)Check if an SBI extension ID is supported or not.✨
sbi_remote_fence_i(9)Execute FENCE.I instruction on given remote harts.✨
sbi_remote_hfence_gvma(9)Execute HFENCE.GVMA instructions on given remote harts for the specified guest physical address range.✨
sbi_remote_hfence_gvma_vmid(9)Execute HFENCE.GVMA instructions on given remote harts for a guest physical address range belonging to a specific VMID.✨
sbi_remote_hfence_vvma(9)Execute HFENCE.VVMA instructions on given remote harts for the current guest virtual address range.✨
sbi_remote_hfence_vvma_asid(9)Execute HFENCE.VVMA instructions on given remote harts for current guest virtual address range belonging to a specific ASID.✨
sbi_remote_sfence_vma_asid(9)Execute SFENCE.VMA instructions on given remote harts for a virtual address range belonging to a specific ASID or not.✨
sbi_send_ipi(9)Send an IPI to any hart.✨
sbi_set_timer(9)Program the timer for next timer event.✨
sbi_shutdown(9)Remove all the harts from executing supervisor code.✨
sbitmap_any_bit_set(9)Check for a set bit in a &struct sbitmap.✨
sbitmap_bitmap_show(9)Write a hex dump of a &struct sbitmap to a &struct seq_file.✨
sbitmap_for_each_set(9)Iterate over each set bit in a &struct sbitmap.✨
sbitmap_free(9)Free memory used by a &struct sbitmap.✨
sbitmap_get(9)Try to allocate a free bit from a &struct sbitmap.✨
sbitmap_get_shallow(9)Try to allocate a free bit from a &struct sbitmap, limiting the depth used from each word.✨
sbitmap_init_node(9)Initialize a &struct sbitmap on a specific memory node.✨
sbitmap_queue_clear(9)Free an allocated bit and wake up waiters on a &struct sbitmap_queue.✨
sbitmap_queue_clear_batch(9)Free a batch of allocated bits &struct sbitmap_queue.✨
sbitmap_queue_free(9)Free memory used by a &struct sbitmap_queue.✨
sbitmap_queue_get(9)Try to allocate a free bit from a &struct sbitmap_queue.✨
sbitmap_queue_get_shallow(9)Try to allocate a free bit from a &struct sbitmap_queue, limiting the depth used from each word, with preemption already disabled.✨
sbitmap_queue_init_node(9)Initialize a &struct sbitmap_queue on a specific memory node.✨
sbitmap_queue_min_shallow_depth(9)Inform a &struct sbitmap_queue of the minimum shallow depth that will be used.✨
sbitmap_queue_recalculate_wake_batch(9)Recalculate wake batch✨
sbitmap_queue_resize(9)Resize a &struct sbitmap_queue.✨
sbitmap_queue_show(9)Dump &struct sbitmap_queue information to a &struct seq_file.✨
sbitmap_queue_wake_all(9)Wake up everything waiting on a &struct sbitmap_queue.✨
sbitmap_queue_wake_up(9)Wake up some of waiters in one waitqueue on a &struct sbitmap_queue.✨
sbitmap_resize(9)Resize a &struct sbitmap.✨
sbitmap_show(9)Dump &struct sbitmap information to a &struct seq_file.✨
sbitmap_weight(9)Return how many set and not cleared bits in a &struct sbitmap.✨
sbq_wait_ptr(9)Get the next wait queue to use for a &struct sbitmap_queue.✨
SBRMI_IOCTL_CPUID_CMD(9)✨
SBRMI_IOCTL_MBOX_CMD(9)✨
SBRMI_IOCTL_MCAMSR_CMD(9)✨
SBRMI_IOCTL_REG_XFER_CMD(9)✨
SBTSI_IOCTL_REG_XFER_CMD(9)✨
sbtsi_xfer(9)Perform a register read or write transfer on an AMD SB-TSI device.✨
sc1200_clock(9)PCI clock✨
sc1200_init_one(9)Initialise an SC1200✨
sc1200_qc_defer(9)implement serialization✨
sc1200_qc_issue(9)command issue✨
sc1200_set_dmamode(9)DMA timing setup✨
sc1200_set_piomode(9)PIO setup✨
sc_piobufavail(9)callback when a PIO buffer is available✨
sc_to_vlt(9)reverse lookup sc to vl @dd - devdata @sc5 - 5 bit sc✨
sc_vsi_update_stats(9)Update statistics✨
sc_wait_for_packet_egress(9)wait for packet✨
sca3000_clean_setup(9)get the device into a predictable state✨
sca3000_event_handler(9)handling ring and non ring events✨
sca3000_hw_ring_preenable(9)hw ring buffer preenable function✨
sca3000_print_rev(9)sysfs interface to read the chip revision number✨
sca3000_read_av_freq(9)sysfs function to get available frequencies✨
sca3000_read_ctrl_reg(9)read from lock protected control register.✨
sca3000_read_raw_samp_freq(9)read_raw handler for IIO_CHAN_INFO_SAMP_FREQ✨
sca3000_reg_lock_on(9)test if the ctrl register lock is on✨
sca3000_ring_int_process(9)ring specific interrupt handling.✨
sca3000_write_ctrl_reg(9)write to a lock protect ctrl register✨
sca3000_write_event_config(9)simple on off control for motion detector✨
sca3000_write_event_value(9)control of threshold and period✨
sca3000_write_raw_samp_freq(9)write_raw handler for IIO_CHAN_INFO_SAMP_FREQ✨
scale(9)LinuxCNC HAL component that applies a scale and offset to its input✨
scaled_ppm_to_ppb(9)convert scaled ppm to ppb✨
scan_all(9)scan entire MTD device.✨
scan_check_cb(9)scan callback.✨
scan_dirty_idx_cb(9)callback used by the scan for a dirty index LEB.✨
scan_fast(9)try to find a fastmap and attach from it.✨
scan_for_dirty(9)find a data LEB with free space.✨
scan_for_dirty_cb(9)dirty space scan callback.✨
scan_for_free_cb(9)free space scan callback.✨
scan_for_idx_cb(9)callback used by the scan for a free LEB for the index.✨
scan_for_leb_for_idx(9)scan for a free LEB for the index.✨
scan_for_master(9)search the valid master node.✨
scan_get_nnode(9)for the scan, get a nnode from either the tree or flash.✨
scan_get_pnode(9)for the scan, get a pnode from either the tree or flash.✨
scan_its_table(9)Scan a contiguous table in guest RAM and applies a function to each entry✨
scan_padding_bytes(9)scan for padding bytes.✨
scan_peb(9)scan and process UBI headers of a PEB.✨
scan_pool(9)scans a pool for changed (no longer empty PEBs).✨
scan_read_oob(9)[GENERIC] Scan data+OOB region to buffer✨
scancode_to_u64(9)converts scancode in &struct input_keymap_entry✨
Scanning and BSS list handling(9)✨
scatterwalk_done_dst(9)Finish one step of a walk of destination scatterlist✨
scatterwalk_done_src(9)Finish one step of a walk of source scatterlist✨
scatterwalk_next(9)Get the next data buffer in a scatterlist walk✨
sccb_is_available(9)Check if the adapter supports SCCB protocol✨
scdc helpers(9)✨
sch_access(9)the main access entry for i2c-sch access✨
sch_init_one(9)Register SCH ATA PCI device with kernel services✨
sch_set_dmamode(9)Initialize host controller PATA DMA timings✨
sch_set_piomode(9)Initialize host controller PATA PIO timings✨
sch_transaction(9)Start the i2c transaction✨
sched_balance_find_src_group(9)Returns the busiest group within the sched_domain if there is an imbalance.✨
sched_clear_itmt_support(9)Revoke platform's support of ITMT✨
sched_group_asym(9)Check if the destination CPU can do asym_packing balance✨
sched_hw_submission (int)(9)✨
sched_idle_set_state(9)Record idle state for the current CPU.✨
sched_jobs (int)(9)✨
sched_mode(9)✨
sched_numa_find_nth_cpu(9)given the NUMA topology, find the Nth closest CPU from @cpus to @cpu, taking into account distance from a given @node.✨
sched_numa_hop_mask(9)Get the cpumask of CPUs at most @hops hops away from @node✨
sched_policy (int)(9)✨
sched_process_global_irq_locked(9)Process the scheduling part of a global IRQ✨
sched_queue_delayed_work(9)Queue a scheduler delayed work.✨
sched_queue_work(9)Queue a scheduler work.✨
sched_set_itmt_core_prio(9)Set CPU priority based on ITMT✨
sched_set_itmt_support(9)Indicate platform supports ITMT✨
sched_setscheduler(9)change the scheduling policy and/or RT priority of a thread.✨
sched_setscheduler_nocheck(9)change the scheduling policy and/or RT priority of a thread from kernel-space.✨
sched_use_asym_prio(9)Check whether asym_packing priority must be used✨
schedule_block_write(9)Queue a block for writing.✨
schedule_deferred(9)Schedule execution of deferred actions on an rq✨
schedule_deferred_locked(9)Schedule execution of deferred actions on an rq✨
schedule_delayed_work(9)put work task in per-CPU workqueue after delay✨
schedule_delayed_work_on(9)queue work in per-CPU workqueue on CPU after delay✨
schedule_erase(9)schedule an erase work.✨
schedule_hrtimeout(9)sleep until timeout✨
schedule_hrtimeout_range(9)sleep until timeout✨
schedule_hrtimeout_range_clock(9)sleep until timeout✨
schedule_on_each_cpu(9)execute a function synchronously on each online CPU✨
schedule_page_save(9)Add a page to the outgoing list of pages waiting to be saved.✨
schedule_preempt_disabled(9)called with preemption disabled✨
schedule_releases(9)Ensure that release processing is scheduled.✨
schedule_tail(9)first thing a freshly forked thread must call.✨
schedule_tail_block_commit(9)Schedule a tail block commit if necessary.✨
schedule_timeout(9)sleep until timeout✨
schedule_timeout_idle(9)sleep until timeout (idle)✨
schedule_timeout_interruptible(9)sleep until timeout (interruptible)✨
schedule_timeout_killable(9)sleep until timeout (killable)✨
schedule_timeout_uninterruptible(9)sleep until timeout (uninterruptible)✨
schedule_ubi_work(9)schedule a work.✨
schedule_work(9)put work task in per-CPU workqueue✨
schedule_work_on(9)put work task on a specific cpu✨
Scheduler(9)✨
sci_apc_agent_link_down(9)✨
sci_apc_agent_link_up(9)handle apc link up events✨
sci_clk_determine_rate(9)Determines a clock rate a clock can be set to✨
sci_clk_get(9)Xlate function for getting clock handles✨
sci_clk_get_parent(9)Get the current parent of a TI SCI clock✨
sci_clk_is_prepared(9)Check if a TI SCI clock is prepared or not✨
sci_clk_prepare(9)Prepare (enable) a TI SCI clock✨
sci_clk_recalc_rate(9)Get clock rate for a TI SCI clock✨
sci_clk_set_parent(9)Set the parent of a TI SCI clock✨
sci_clk_set_rate(9)Set rate for a TI SCI clock✨
sci_clk_unprepare(9)Un-prepares (disables) a TI SCI clock✨
sci_controller_allocate_remote_node_context(9)✨
sci_controller_clear_invalid_phy(9)✨
sci_controller_complete_io(9)This method will perform core specific completion operations for an IO request. After this method is invoked, the user should consider the IO request as invalid until it is properly reused (i.e…✨
sci_controller_get_suggested_start_timeout(9)This method returns the suggested sci_controller_start() timeout amount. The user is free to use any timeout value, but this method provides the suggested minimum start timeout value. The returned…✨
sci_controller_reset(9)This method will reset the supplied core controller regardless of the state of said controller. This operation is considered destructive. In other words, all current operations are wiped out. No IO…✨
sci_controller_set_interrupt_coalescence(9)This method allows the user to configure the interrupt coalescence.✨
sci_controller_start_next_phy(9)start phy✨
sci_controller_start_task(9)This method is called by the SCIC user to send/start a framework task management request.✨
sci_controller_stop(9)This method will stop an individual controller object.This method will invoke the associated user callback upon completion. The completion callback is called when the following conditions are met…✨
sci_mpc_agent_link_down(9)✨
sci_phy_complete_link_training(9)perform processing common to all protocols upon completion of link training.✨
sci_phy_setup_transport(9)This method assigns the direct attached device ID for this phy.✨
sci_port_abort_dummy_request(9)✨
sci_port_add_phy(9)✨
sci_port_configuration_agent_find_port(9)✨
sci_port_configuration_agent_validate_ports(9)✨
sci_port_construct_dummy_rnc(9)create dummy rnc for si workaround✨
sci_port_general_link_up_handler(9)phy can be assigned to port?✨
sci_port_get_properties(9)This method simply returns the properties regarding the port, such as: physical index, protocols, sas address, etc.✨
sci_port_is_phy_mask_valid(9)✨
sci_port_is_wide(9)✨
sci_port_link_detected(9)✨
sci_port_post_dummy_request(9)post dummy/workaround request✨
sci_port_ready_substate_operational_exit(9)✨
sci_port_remove_phy(9)✨
sci_port_resume_port_task_scheduler(9)✨
sci_remote_device_construct(9)common construction✨
sci_remote_device_destruct(9)free remote node context and destruct✨
sci_remote_device_start(9)This method will start the supplied remote device. This method enables normal IO requests to flow through to the remote device.✨
sci_remote_device_stop(9)This method will stop both transmission and reception of link activity for the supplied remote device. This method disables normal IO requests from flowing through to the remote device.✨
sci_remote_node_context_is_ready(9)✨
sci_remote_node_table_allocate_remote_node(9)✨
sci_remote_node_table_allocate_single_remote_node(9)✨
sci_remote_node_table_allocate_triple_remote_node(9)✨
sci_remote_node_table_clear_group(9)✨
sci_remote_node_table_clear_group_index(9)✨
sci_remote_node_table_clear_node_index(9)✨