📦 linux-manual

82568 pages · page 279 of 413

S (continued)

scsi_dev_info_list_find(9)find a matching dev_info list entry.✨
scsi_dev_info_remove_list(9)destroy an added devinfo list✨
scsi_device_block(9)try to transition to the SDEV_BLOCK state✨
scsi_device_from_queue(9)return sdev associated with a request_queue✨
scsi_device_get(9)get an additional reference to a scsi_device✨
scsi_device_is_pseudo_dev(9)Whether a device is a pseudo SCSI device.✨
scsi_device_lookup(9)find a device given the host✨
scsi_device_lookup_by_target(9)find a device given the target✨
scsi_device_put(9)release a reference to a scsi_device✨
scsi_device_quiesce(9)Block all commands except power management.✨
scsi_device_resume(9)Restart user issued commands to a quiesced device.✨
scsi_device_set_state(9)Take the given device through the device state model.✨
scsi_device_supports_vpd(9)test if a device supports VPD pages✨
scsi_device_type(9)Return 17-char string indicating device type.✨
scsi_dispatch_cmd(9)Dispatch a command to the low-level driver.✨
scsi_dld(9)Get duration limit descriptor index✨
scsi_dma_map(9)perform DMA mapping against command's sg lists✨
scsi_dma_unmap(9)unmap command's sg lists mapped by scsi_dma_map✨
scsi_eh_bus_device_reset(9)send bdr if needed✨
scsi_eh_bus_reset(9)send a bus reset✨
scsi_eh_completed_normally(9)Disposition a eh cmd on return from LLD.✨
scsi_eh_done(9)Completion function for error handling.✨
scsi_eh_finish_cmd(9)Handle a cmd that eh is finished with.✨
scsi_eh_flush_done_q(9)finish processed commands or retry them.✨
scsi_eh_get_sense(9)Get device sense data.✨
scsi_eh_host_reset(9)send a host reset✨
scsi_eh_lock_door(9)Prevent medium removal for the specified device✨
scsi_eh_offline_sdevs(9)offline scsi devices that fail to recover✨
scsi_eh_prep_cmnd(9)Save a scsi command info as part of error recovery✨
scsi_eh_prt_fail_stats(9)Log info on failures.✨
scsi_eh_ready_devs(9)check device ready state and recover if not.✨
scsi_eh_reset(9)call into ->eh_action to reset internal counters✨
scsi_eh_restore_cmnd(9)Restore a scsi command info as part of error recovery✨
scsi_eh_scmd_add(9)add scsi cmd to error handling.✨
scsi_eh_target_reset(9)send target reset if needed✨
scsi_eh_test_devices(9)check if devices are responding from error recovery.✨
scsi_eh_try_stu(9)Send START_UNIT to device.✨
scsi_eh_tur(9)Send TUR to device.✨
scsi_error_handler(9)SCSI error handler thread✨
scsi_evt_emit(9)emit a single SCSI device uevent✨
scsi_evt_thread(9)send a uevent for each scsi event✨
scsi_execute_cmd(9)insert request and wait for the result✨
scsi_exit_devinfo(9)remove /proc/scsi/device_info & the scsi_dev_info_list✨
scsi_exit_procfs(9)Remove scsi/scsi and scsi from procfs✨
scsi_failures_reset_retries(9)reset all failures to zero✨
scsi_finish_async_scan(9)asynchronous scan has finished✨
scsi_finish_command(9)cleanup and pass command back to upper layer✨
scsi_flush_work(9)Flush a Scsi_Host's workqueue.✨
scsi_get_device_flags(9)get device specific flags from the dynamic device list.✨
scsi_get_device_flags_keyed(9)get device specific flags from the dynamic device list✨
scsi_get_internal_cmd(9)Allocate an internal SCSI command.✨
scsi_get_pseudo_sdev(9)Attach a pseudo SCSI device to a SCSI host✨
scsi_get_sense_info_fld(9)get information field from sense data (either fixed or descriptor format)✨
scsi_get_vpd_buf(9)Get Vital Product Data from a SCSI device✨
scsi_get_vpd_page(9)Get Vital Product Data from a SCSI device✨
scsi_host_alloc(9)register a scsi host adapter instance.✨
scsi_host_block(9)Try to transition all logical units to the SDEV_BLOCK state✨
scsi_host_busy(9)Return the count of in-flight commands✨
scsi_host_busy_iter(9)Iterate over all busy commands✨
scsi_host_complete_all_commands(9)Terminate all running commands✨
scsi_host_find_tag(9)find the tagged command by host✨
scsi_host_get(9)inc a Scsi_Host ref count✨
scsi_host_lookup(9)get a reference to a Scsi_Host by host no✨
scsi_host_put(9)dec a Scsi_Host ref count✨
scsi_host_scan_allowed(9)Is scanning of this host allowed✨
scsi_host_set_state(9)Take the given host through the host state model.✨
scsi_init_devinfo(9)set up the dynamic device list.✨
scsi_init_procfs(9)create scsi and scsi/scsi in procfs✨
scsi_initialize_rq(9)initialize struct scsi_cmnd partially✨
scsi_inq_str(9)print INQUIRY data from min to max index, strip trailing whitespace✨
scsi_internal_device_block_nowait(9)try to transition to the SDEV_BLOCK state✨
scsi_internal_device_unblock(9)resume a device after a block request✨
scsi_internal_device_unblock_nowait(9)resume a device after a block request✨
scsi_io_completion(9)Completion processing for SCSI commands.✨
scsi_ioctl(9)Dispatch ioctl to scsi device✨
scsi_ioctl_block_when_processing_errors(9)prevent commands from being queued✨
scsi_ioctl_reset(9)explicitly reset a host/bus/target/device✨
scsi_is_sas_phy(9)check if a struct device represents a SAS PHY✨
scsi_is_sas_port(9)check if a struct device represents a SAS port✨
scsi_is_sas_rphy(9)check if a struct device represents a SAS remote PHY✨
scsi_kmap_atomic_sg(9)find and atomically map an sg-elemnt✨
scsi_kunmap_atomic_sg(9)atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg✨
scsi_mode_select(9)issue a mode select✨
scsi_mode_sense(9)issue a mode sense, falling back from 10 to six bytes if necessary.✨
scsi_msg_to_host_byte(9)translate message byte✨
scsi_netlink_exit(9)Called by SCSI subsystem to disable the SCSI transport netlink interface✨
scsi_netlink_init(9)Called by SCSI subsystem to initialize the SCSI transport netlink interface✨
scsi_nl_rcv_msg(9)Receive message handler.✨
scsi_noretry_cmd(9)determine if command should be failed fast✨
scsi_normalize_sense(9)normalize main elements from either fixed or descriptor sense data format into a common format.✨
scsi_partsize(9)Parse cylinders/heads/sectors from PC partition table✨
scsi_prep_async_scan(9)prepare for an async scan✨
scsi_probe_and_add_lun(9)probe a LUN, if a LUN is found add it✨
scsi_probe_lun(9)probe a single LUN using a SCSI INQUIRY✨
scsi_proc_host_add(9)Add entry for this host to appropriate /proc dir✨
scsi_proc_host_rm(9)remove this host's entry from /proc✨
scsi_proc_hostdir_add(9)Create directory in /proc for a scsi host✨
scsi_proc_hostdir_rm(9)remove directory in /proc for a scsi host✨
scsi_put_internal_cmd(9)Free an internal SCSI command.✨
scsi_queue_insert(9)Reinsert a command in the queue.✨
scsi_queue_work(9)Queue work to the Scsi_Host workqueue.✨
scsi_remove_device(9)unregister a device from the scsi bus✨
scsi_remove_host(9)remove a scsi host✨
scsi_remove_single_device(9)Respond to user request to remove a device✨
scsi_remove_target(9)try to remove a target and all its devices✨
scsi_report_bus_reset(9)report bus reset observed✨
scsi_report_device_reset(9)report device reset observed✨
scsi_report_lun_scan(9)Scan using SCSI REPORT LUN results✨
scsi_report_opcode(9)Find out if a given command is supported✨
scsi_report_sense(9)Examine scsi sense information and log messages for certain conditions, also issue uevents for some of them.✨
scsi_request_sense(9)Request sense data from a particular target.✨
scsi_restart_operations(9)restart io operations to the specified host.✨
scsi_result_to_blk_status(9)translate a SCSI result code into blk_status_t✨
scsi_rq_err_bytes(9)determine number of bytes till the next failure boundary✨
scsi_run_queue(9)Select a proper request queue to serve next.✨
scsi_sanitize_inquiry_string(9)remove non-graphical chars from an INQUIRY result string✨
scsi_scan_host(9)scan the given adapter✨
scsi_scan_target(9)scan a target id, possibly including all LUNs on the target.✨
scsi_schedule_eh(9)schedule EH for SCSI host✨
scsi_send_eh_cmnd(9)submit a scsi command as part of error recovery✨
scsi_sense_desc_find(9)search for a given descriptor type in descriptor sense data format.✨
scsi_sequential_lun_scan(9)sequentially scan a SCSI target✨
scsi_set_medium_removal(9)send command to allow or prevent medium removal✨
scsi_set_sense_field_pointer(9)set the field pointer sense key specific information in a formatted sense data buffer✨
scsi_set_sense_information(9)set the information field in a formatted sense data buffer✨
scsi_status_is_check_condition(9)check the status return.✨
scsi_status_is_good(9)check the status return.✨
scsi_sysfs_add_host(9)add scsi host to subsystem✨
scsi_sysfs_add_sdev(9)add scsi device to sysfs✨
scsi_tape_release(9)Called to free the Scsi_Tape structure✨
scsi_target_reap(9)check to see if target is in use and destroy if not✨
scsi_target_reap_ref_release(9)remove target from visibility✨
scsi_template_proc_dir(9)returns the procfs dir for a SCSI host template✨
scsi_test_unit_ready(9)test if unit is ready✨
scsi_timeout(9)Timeout function for normal scsi commands.✨
scsi_track_queue_full(9)track QUEUE_FULL events to adjust queue depth✨
scsi_try_bus_device_reset(9)Ask host to perform a BDR on a dev✨
scsi_try_bus_reset(9)ask host to perform a bus reset✨
scsi_try_host_reset(9)ask host adapter to reset itself✨
scsi_try_target_reset(9)Ask host to perform a target reset✨
scsi_try_to_abort_cmd(9)Ask host to abort a SCSI command✨
scsi_unblock_requests(9)Utility function used by low-level drivers to allow further commands to be queued to the device.✨
scsi_unjam_host(9)Attempt to fix a host which has a cmd that failed.✨
scsi_unlock_floptical(9)unlock device via a special MODE SENSE command✨
scsi_vpd_inquiry(9)Request a device provide us with a VPD page✨
scsi_vpd_lun_id(9)return a unique device identification✨
scsi_vpd_lun_serial(9)return a unique device serial number✨
scsi_vpd_tpg_id(9)return a target port group identifier✨
scsicam_bios_param(9)Determine geometry of a disk in cylinders/heads/sectors.✨
scsih_abort(9)eh threads main abort routine✨
scsih_bios_param(9)fetch head, sector, cylinder info for a disk✨
scsih_change_queue_depth(9)setting device queue depth✨
scsih_dev_reset(9)eh threads main device reset routine✨
scsih_exit(9)exit point for this driver (when it is a module).✨
scsih_get_resync(9)get raid volume resync percent complete✨
scsih_get_state(9)get raid volume level✨
scsih_host_reset(9)eh threads main host reset routine✨
scsih_init(9)main entry point for this driver.✨
scsih_is_raid(9)return boolean indicating device is raid volume✨
scsih_map_queues(9)map reply queues with request queues✨
scsih_pci_error_detected(9)Called when a PCI error is detected.✨
scsih_pci_mmio_enabled(9)Enable MMIO and dump debug registers✨
scsih_pci_resume(9)resume normal ops after PCI reset✨
scsih_pci_slot_reset(9)Called when PCI slot has been reset.✨
scsih_qcmd(9)main scsi request entry point✨
scsih_remove(9)detach and remove add host✨
scsih_resume(9)power management resume main entry point✨
scsih_scan_finished(9)scsi lld callback for .scan_finished✨
scsih_scan_start(9)scsi lld callback for .scan_start✨
scsih_sdev_configure(9)device configure routine.✨
scsih_sdev_destroy(9)device destroy routine✨
scsih_sdev_init(9)device add routine✨
scsih_shutdown(9)routine call during system shutdown✨
scsih_suspend(9)power management suspend main entry point✨
scsih_target_alloc(9)target add routine✨
scsih_target_destroy(9)target destroy routine✨
scsih_target_reset(9)eh threads main target reset routine✨
scsih_tm_cmd_map_status(9)map the target reset & LUN reset TM status✨
scsih_tm_post_processing(9)post processing of target & LUN reset✨
scsilun_to_int(9)convert a scsi_lun to an int✨
scsw_actl(9)return scsw actl field✨
scsw_cc(9)return scsw cc field✨
scsw_cmd_is_solicited(9)check for solicited scsw✨
scsw_cmd_is_valid_actl(9)check actl field validity✨
scsw_cmd_is_valid_alcc(9)check alcc field validity✨
scsw_cmd_is_valid_cc(9)check cc field validity✨
scsw_cmd_is_valid_cstat(9)check cstat field validity✨
scsw_cmd_is_valid_dstat(9)check dstat field validity✨
scsw_cmd_is_valid_ectl(9)check ectl field validity✨
scsw_cmd_is_valid_eswf(9)check eswf field validity✨
scsw_cmd_is_valid_fctl(9)check fctl field validity✨
scsw_cmd_is_valid_fmt(9)check fmt field validity✨
scsw_cmd_is_valid_isic(9)check isic field validity✨
scsw_cmd_is_valid_key(9)check key field validity✨
scsw_cmd_is_valid_pfch(9)check pfch field validity✨
scsw_cmd_is_valid_pno(9)check pno field validity✨
scsw_cmd_is_valid_sctl(9)check sctl field validity✨
scsw_cmd_is_valid_ssi(9)check ssi field validity✨
scsw_cmd_is_valid_stctl(9)check stctl field validity✨
scsw_cmd_is_valid_zcc(9)check zcc field validity✨