📦 linux-manual

P (continued)

• pcie_port_find_device(9)find the struct device✨
• pcie_port_service_register(9)register PCI Express port service driver✨
• pcie_port_service_unregister(9)unregister PCI Express port service driver✨
• pcie_print_link_status(9)Report the PCI device's link speed and width✨
• pcie_print_tlp_log(9)Print TLP Header / Prefix Log contents✨
• pcie_read_tlp_log(9)read TLP Header Log✨
• pcie_relaxed_ordering_enabled(9)Probe for PCIe relaxed ordering enable✨
• pcie_replay_count(9)✨
• pcie_reset_flr(9)initiate a PCIe function level reset✨
• pcie_retrain_link(9)Request a link retrain and wait for it to complete✨
• pcie_set_ecrc_checking(9)set/unset PCIe ECRC checking for a device based on global policy✨
• pcie_set_mps(9)set PCI Express maximum payload size✨
• pcie_set_readrq(9)set PCI Express maximum memory read request✨
• pcie_set_target_speed(9)Set downstream Link Speed for PCIe Port✨
• pcie_tph_get_cpu_st(9)Retrieve Steering Tag for a target memory associated with a specific CPU✨
• pcie_tph_get_st_table_loc(9)Return the device's ST table location✨
• pcie_tph_set_st_entry(9)Set Steering Tag in the ST table entry✨
• pcie_wait_for_link(9)Wait until link is active or inactive✨
• pcie_wait_for_link_delay(9)Wait until link is active or inactive✨
• pcie_wait_for_link_status(9)Wait for link status change✨
• pcie_walk_rcec(9)Walk RCiEP devices associating with RCEC and call callback.✨
• pcie_write_cmd(9)Issue controller command✨
• pciehp_card_present(9)Is the card present✨
• pciehp_card_present_or_link_active(9)whether given slot is occupied✨
• pciehp_check_link_active(9)Is the link active✨
• pciehp_check_presence(9)synthesize event if presence has changed✨
• pciehp_configure_device(9)enumerate PCI devices below a hotplug bridge✨
• pciehp_is_native(9)Check whether a hotplug port is handled by the OS✨
• pciehp_set_indicators(9)set attention indicator, power indicator, or both✨
• pciehp_slot_reset(9)ignore link event caused by error-induced hot reset✨
• pciehp_unconfigure_device(9)remove PCI devices below a hotplug bridge✨
• pcierror_quiesce_device(9)Cause device to go quiet so it can be safely removed/reset/etc✨
• pcim_enable_device(9)Managed pci_enable_device()✨
• pcim_intx(9)managed pci_intx()✨
• pcim_iomap(9)Managed pcim_iomap()✨
• pcim_iomap_range(9)Create a ranged __iomap mapping within a PCI BAR✨
• pcim_iomap_region(9)Request and iomap a PCI BAR✨
• pcim_iomap_regions(9)Request and iomap PCI BARs (DEPRECATED)✨
• pcim_iomap_table(9)access iomap allocation table (DEPRECATED)✨
• pcim_iounmap(9)Managed pci_iounmap()✨
• pcim_iounmap_region(9)Unmap and release a PCI BAR✨
• pcim_p2pdma_init(9)Initialise peer-to-peer DMA providers✨
• pcim_p2pdma_provider(9)Get peer-to-peer DMA provider✨
• pcim_pin_device(9)Pin managed PCI device✨
• pcim_release_all_regions(9)Release all regions of a PCI-device✨
• pcim_release_region(9)Release a PCI BAR✨
• pcim_request_all_regions(9)Request all regions✨
• pcim_request_region(9)Request a PCI BAR✨
• pcim_set_mwi(9)a device-managed pci_set_mwi()✨
• pcix_get_max_mmrbc(9)get PCI-X maximum designed memory read byte count✨
• pcix_get_mmrbc(9)get PCI-X maximum memory read byte count✨
• pcix_set_mmrbc(9)set PCI-X maximum memory read byte count✨
• pcl_alloc_call(9)Construct a parsed chunk list for the Call body✨
• pcl_alloc_read(9)Construct a parsed chunk list for normal Read chunks✨
• pcl_alloc_write(9)Construct a parsed chunk list from a Write list✨
• pcl_check_read_chunk_positions(9)Validate Read chunk positions✨
• pcl_chunk_end_offset(9)Return offset of byte range following @chunk✨
• pcl_first_chunk(9)Return first chunk in a parsed chunk list✨
• pcl_for_each_chunk(9)Iterate over chunks in a parsed chunk list✨
• pcl_for_each_segment(9)Iterate over segments in a parsed chunk✨
• pcl_free(9)Release all memory associated with a parsed chunk list✨
• pcl_init(9)Initialize a parsed chunk list✨
• pcl_is_empty(9)Return true if parsed chunk list is empty✨
• pcl_next_chunk(9)Return next chunk in a parsed chunk list✨
• pcl_process_nonpayloads(9)Process non-payload regions inside @xdr✨
• pcm_close(9)implements close callback function for PCM middle layer✨
• pcm_for_each_format(9)helper to iterate for each format type✨
• pcm_format_to_bits(9)Strong-typed conversion of pcm_format to bitwise✨
• pcm_open(9)implements open callback function for PCM middle layer✨
• pcm_pointer(9)implements pointer callback function for PCM middle layer✨
• pcm_prepare(9)implements prepare callback function for PCM middle layer✨
• pcm_trigger(9)implements trigger callback function for PCM middle layer✨
• pcmcia_8bit_drain_fifo(9)Stock FIFO drain logic for SFF controllers✨
• pcmcia_disable_device(9)disable and clean up a PCMCIA device✨
• pcmcia_enable_device(9)set up and activate a PCMCIA device✨
• pcmcia_fixup_iowidth(9)reduce io width to 8bit✨
• pcmcia_fixup_vpp(9)set Vpp to a new voltage level✨
• pcmcia_get_mac_from_cis(9)read out MAC address from CISTPL_FUNCE✨
• pcmcia_get_tuple(9)get first tuple from CIS✨
• pcmcia_init_one(9)attach a PCMCIA interface✨
• pcmcia_load_firmware(9)load CIS from userspace if device-provided is broken✨
• pcmcia_loop_config(9)loop over configuration options✨
• pcmcia_loop_tuple(9)loop over tuples in the CIS✨
• pcmcia_map_mem_page(9)modify iomem window to point to a different offset✨
• pcmcia_nonstatic_validate_mem(9)try to validate iomem for PCMCIA use✨
• pcmcia_parse_uevents(9)tell pccardd to issue manual commands✨
• pcmcia_register_driver(9)register a PCMCIA driver with the bus core✨
• pcmcia_register_socket(9)add a new pcmcia socket device✨
• pcmcia_release_configuration(9)physically disable a PCMCIA device✨
• pcmcia_release_io(9)release I/O allocated by a PCMCIA device✨
• pcmcia_release_window(9)release reserved iomem for PCMCIA devices✨
• pcmcia_remove_one(9)unplug an pcmcia interface✨
• pcmcia_request_io(9)attempt to reserve port ranges for PCMCIA devices✨
• pcmcia_request_irq(9)attempt to request a IRQ for a PCMCIA device✨
• pcmcia_request_window(9)attempt to reserve iomem for PCMCIA devices✨
• pcmcia_set_mode(9)PCMCIA specific mode setup✨
• pcmcia_set_mode_8bit(9)PCMCIA specific mode setup✨
• pcmcia_setup_irq(9)determine IRQ to be used for device✨
• pcmcia_setup_isa_irq(9)determine whether an ISA IRQ can be used✨
• pcmcia_unregister_driver(9)unregister a PCMCIA driver with the bus core✨
• pcmcia_unregister_socket(9)remove a pcmcia socket device✨
• PCODE(9)✨
• pcpu_addr_in_chunk(9)check if the address is served from this chunk✨
• pcpu_alloc(9)the percpu allocator✨
• pcpu_alloc_alloc_info(9)allocate percpu allocation info✨
• pcpu_alloc_area(9)allocates an area from a pcpu_chunk✨
• pcpu_alloc_first_chunk(9)creates chunks that serve the first chunk✨
• pcpu_alloc_pages(9)allocates pages for @chunk✨
• pcpu_balance_free(9)manage the amount of free chunks✨
• pcpu_balance_populated(9)manage the amount of populated pages✨
• pcpu_balance_workfn(9)manage the amount of free chunks and populated pages✨
• pcpu_block_refresh_hint(9)✨
• pcpu_block_update(9)updates a block given a free area✨
• pcpu_block_update_hint_alloc(9)update hint on allocation path✨
• pcpu_block_update_hint_free(9)updates the block hints on the free path✨
• pcpu_build_alloc_info(9)build alloc_info considering distances between CPUs✨
• pcpu_check_block_hint(9)check against the contig hint✨
• pcpu_chunk_addr_search(9)determine chunk containing specified address✨
• pcpu_chunk_depopulated(9)post-depopulation bookkeeping✨
• pcpu_chunk_map_bits(9)helper to convert nr_pages to size of bitmap✨
• pcpu_chunk_nr_blocks(9)converts nr_pages to # of md_blocks✨
• pcpu_chunk_populated(9)post-population bookkeeping✨
• pcpu_chunk_refresh_hint(9)updates metadata about a chunk✨
• pcpu_chunk_relocate(9)put chunk in the appropriate chunk slot✨
• pcpu_depopulate_chunk(9)depopulate and unmap an area of a pcpu_chunk✨
• pcpu_dump_alloc_info(9)print out information about pcpu_alloc_info✨
• pcpu_embed_first_chunk(9)embed the first percpu chunk into bootmem✨
• pcpu_find_block_fit(9)finds the block index to start searching✨
• pcpu_free_alloc_info(9)free percpu allocation info✨
• pcpu_free_area(9)frees the corresponding offset✨
• pcpu_free_pages(9)free pages which were allocated for @chunk✨
• pcpu_free_vm_areas(9)free vmalloc areas for percpu allocator✨
• pcpu_get_pages(9)get temp pages array✨
• pcpu_get_vm_areas(9)allocate vmalloc areas for percpu allocator✨
• pcpu_is_populated(9)determines if the region is populated✨
• pcpu_map_pages(9)map pages into a pcpu_chunk✨
• pcpu_mem_free(9)free memory✨
• pcpu_mem_zalloc(9)allocate memory✨
• pcpu_need_numa(9)determine percpu allocation needs to consider NUMA✨
• pcpu_next_fit_region(9)finds fit areas for a given allocation request✨
• pcpu_next_md_free_region(9)finds the next hint free area✨
• pcpu_nr_pages_to_map_bits(9)converts the pages to size of bitmap✨
• pcpu_obj_full_size(9)helper to calculate size of each accounted object✨
• pcpu_page_first_chunk(9)map the first chunk using PAGE_SIZE pages✨
• pcpu_populate_chunk(9)populate and map an area of a pcpu_chunk✨
• pcpu_post_map_flush(9)flush cache after mapping✨
• pcpu_post_unmap_tlb_flush(9)flush TLB after unmapping✨
• pcpu_pre_unmap_flush(9)flush cache prior to unmapping✨
• pcpu_reclaim_populated(9)scan over to_depopulate chunks and free empty pages✨
• pcpu_setup_first_chunk(9)initialize the first percpu chunk✨
• pcpu_should_reclaim_chunk(9)determine if a chunk should go into reclaim✨
• pcpu_unmap_pages(9)unmap pages out of a pcpu_chunk✨
• pcs_add_function(9)adds a new function to the function list✨
• pcs_add_pin(9)add a pin to the static per controller pin array✨
• pcs_allocate_pin_table(9)adds all the pins for the pinctrl driver✨
• pcs_an_restart(9)restart 802.3z BaseX autonegotiation✨
• pcs_config(9)Configure the PCS mode and advertisement✨
• pcs_disable(9)disable the PCS.✨
• pcs_disable_eee(9)Disable EEE at the PCS✨
• pcs_dt_node_to_map(9)allocates and parses pinctrl maps✨
• pcs_enable(9)enable the PCS.✨
• pcs_enable_eee(9)Enable EEE at the PCS✨
• pcs_free_resources(9)free memory used by this driver✨
• pcs_get_pin_by_offset(9)get a pin index based on the register offset✨
• pcs_get_state(9)Read the current inband link state from the hardware✨
• pcs_inband_caps(9)query PCS in-band capabilities for interface mode.✨
• pcs_irq_chain_handler(9)handler for the dedicated chained interrupt case✨
• pcs_irq_free(9)free interrupt✨
• pcs_irq_handle(9)common interrupt handler✨
• pcs_irq_handler(9)handler for the shared interrupt case✨
• pcs_irq_init_chained_handler(9)set up a chained interrupt handler✨
• pcs_irq_mask(9)mask pinctrl interrupt✨
• pcs_irq_set(9)enables or disables an interrupt✨
• pcs_irq_set_wake(9)toggle the suspend and resume wake up✨
• pcs_irq_unmask(9)unmask pinctrl interrupt✨
• pcs_link_up(9)program the PCS for the resolved link configuration✨
• pcs_parse_one_pinctrl_entry(9)parses a device tree mux entry✨
• pcs_pre_init(9)Configure PCS components necessary for MAC initialization✨
• pcs_quirk_missing_pinctrl_cells(9)handle legacy binding✨
• pcs_validate(9)validate the link configuration.✨
• pcxhr_init_rmh(9)initialize the RMH instance✨
• pd_to_blkg(9)get blkg associated with policy private data✨
• pdc2026x_bmdma_start(9)DMA engine begin✨
• pdc2026x_bmdma_stop(9)DMA engine stop✨
• pdc2026x_check_atapi_dma(9)Check whether ATAPI DMA can be supported for this command✨
• pdc2026x_dev_config(9)device setup hook✨
• pdc2027x_cable_detect(9)Probe host controller cable detect info✨
• pdc2027x_check_atapi_dma(9)Check whether ATAPI DMA can be supported for this command✨
• pdc2027x_init_one(9)PCI probe function Called when an instance of PCI adapter is inserted. This function checks whether the hardware is supported, initialize hardware and register an instance of ata_host to libata…✨
• pdc2027x_mode_filter(9)mode selection filter✨
• pdc2027x_port_enabled(9)Check PDC ATA control register to see whether the port is enabled.✨
• pdc2027x_prereset(9)prereset for PATA host controller✨
• pdc2027x_set_dmamode(9)Initialize host controller PATA UDMA timings✨
• pdc2027x_set_mode(9)Set the timing registers back to correct values.✨
• pdc2027x_set_piomode(9)Initialize host controller PATA PIO timings✨
• pdc202xx_configure_piomode(9)set chip PIO timing✨
• pdc202xx_set_dmamode(9)set DMA mode in chip✨
• pdc202xx_set_piomode(9)set initial PIO mode data✨
• pdc_add_valid(9)Verify address can be accessed without causing a HPMC.✨
• pdc_adjust_pll(9)Adjust the PLL input clock in Hz.✨