📦 linux-manual

82568 pages · page 245 of 413

P (continued)

pfnmap_untrack(9)untrack a pfn range✨
PFRT_LOG_IOC_GET_DATA_INFO(9)_IOR(PFRUT_IOCTL_MAGIC, 0x08, struct pfrt_log_data_info)✨
PFRT_LOG_IOC_GET_INFO(9)_IOR(PFRUT_IOCTL_MAGIC, 0x07, struct pfrt_log_info)✨
PFRT_LOG_IOC_SET_INFO(9)_IOW(PFRUT_IOCTL_MAGIC, 0x06, struct pfrt_log_info)✨
PFRU_IOC_ACTIVATE(9)_IOW(PFRUT_IOCTL_MAGIC, 0x03, unsigned int)✨
PFRU_IOC_QUERY_CAP(9)_IOR(PFRUT_IOCTL_MAGIC, 0x05, struct pfru_update_cap_info)✨
PFRU_IOC_SET_REV(9)_IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int)✨
PFRU_IOC_STAGE(9)_IOW(PFRUT_IOCTL_MAGIC, 0x02, unsigned int)✨
PFRU_IOC_STAGE_ACTIVATE(9)_IOW(PFRUT_IOCTL_MAGIC, 0x04, unsigned int)✨
pg_mask (uint)(9)✨
phm_get_clock_info(9)✨
phm_start_thermal_controller(9)Initializes the thermal controller subsystem.✨
PHY Calibration routines(9)✨
PHY related functions(9)✨
phy_advertise_eee_all(9)Advertise all supported EEE modes✨
phy_advertise_supported(9)Advertise all supported modes✨
phy_aneg_done(9)return auto-negotiation status✨
phy_attach_direct(9)attach a network device to a given PHY device pointer✨
phy_attest_sequence_begin(9)Begin a response data for attestation command retrieval sequence.✨
phy_attest_sequence_end(9)Finalize a attestation command response retrieval sequence.✨
phy_CalculateBitShift(9)Get shifted position of the BitMask.✨
phy_calibrate(9)Tunes the phy hw parameters for current configuration✨
phy_can_wakeup(9)indicate whether PHY has driver model wakeup capabilities✨
phy_caps_from_interface(9)Get the link capa from a given PHY interface✨
phy_caps_init(9)Initializes the link_caps array from the link_mode_params.✨
phy_caps_linkmode_max_speed(9)Clamp a linkmodes set to a max speed✨
phy_caps_linkmodes(9)Convert a bitfield of capabilities into linkmodes✨
phy_caps_lookup(9)Lookup capabilities by speed/duplex that matches a mask✨
phy_caps_lookup_by_linkmode(9)Lookup the fastest matching link_capabilities✨
phy_caps_lookup_by_linkmode_rev(9)Lookup the slowest matching link_capabilities✨
phy_caps_medium_get_supported(9)Returns linkmodes supported on a given medium✨
phy_caps_mediums_from_linkmodes(9)Get all mediums from a linkmodes list✨
phy_caps_speeds(9)Fill an array of supported SPEED_* values for given modes✨
phy_caps_valid(9)Validate a linkmodes set agains given speed and duplex✨
phy_check_downshift(9)check whether downshift occurred✨
phy_check_link_status(9)check link status and set state accordingly✨
phy_check_valid(9)check if there is a valid PHY setting which matches speed, duplex, and feature mask✨
phy_clear_bits(9)Convenience function for clearing bits in a PHY register✨
phy_clear_bits_mmd(9)Convenience function for clearing bits in a register on MMD✨
phy_config_inband(9)configure the desired PHY in-band mode✨
phy_config_interrupt(9)configure the PHY device for the requested interrupts✨
phy_configure(9)Changes the phy parameters✨
phy_connect(9)connect an ethernet device to a PHY device✨
phy_connect_direct(9)connect an ethernet device to a specific phy_device✨
phy_create(9)create a new phy✨
phy_create_lookup(9)allocate and register PHY/device association✨
phy_destroy(9)destroy the phy✨
phy_detach(9)detach a PHY device from its network device✨
phy_device_register(9)Register the phy device on the MDIO bus✨
phy_device_remove(9)Remove a previously registered phy device from the MDIO bus✨
phy_disable_eee(9)Disable EEE for the PHY✨
phy_disable_eee_mode(9)Don't advertise an EEE mode.✨
phy_disable_interrupts(9)Disable the PHY interrupts from the PHY side✨
phy_disconnect(9)disable interrupts, stop state machine, and detach a PHY device✨
phy_do_ioctl(9)generic ndo_eth_ioctl implementation✨
phy_do_ioctl_running(9)generic ndo_eth_ioctl implementation but test first✨
phy_driver_is_genphy(9)Convenience function to check whether PHY is driven by one of the generic PHY drivers✨
phy_driver_register(9)register a phy_driver with the PHY layer✨
phy_duplex_to_str(9)Return string describing the duplex✨
phy_eee_rx_clock_stop(9)configure PHY receive clock in LPI✨
phy_eee_tx_clock_stop_capable(9)indicate whether the MAC can stop tx clock✨
phy_enable_interrupts(9)Enable the interrupts from the PHY side✨
phy_error(9)enter ERROR state for this PHY device✨
phy_ethtool_get_eee(9)get EEE supported and status✨
phy_ethtool_get_plca_cfg(9)Get PLCA RS configuration✨
phy_ethtool_get_plca_status(9)Get PLCA RS status information✨
phy_ethtool_get_sset_count(9)Get the number of statistic counters✨
phy_ethtool_get_stats(9)Get the statistic counters✨
phy_ethtool_get_strings(9)Get the statistic counter names✨
phy_ethtool_get_wol(9)Get the current Wake On LAN configuration✨
phy_ethtool_nway_reset(9)Restart auto negotiation✨
phy_ethtool_set_eee(9)set EEE supported and status✨
phy_ethtool_set_eee_noneg(9)Adjusts MAC LPI configuration without PHY renegotiation✨
phy_ethtool_set_plca_cfg(9)Set PLCA RS configuration✨
phy_ethtool_set_wol(9)Configure Wake On LAN✨
phy_exit(9)Phy internal un-initialization✨
phy_find_next(9)finds the next PHY device on the bus✨
phy_fix_phy_mode_for_mac_delays(9)Convenience function for fixing PHY mode based on whether mac adds internal delay✨
phy_free_interrupt(9)disable and free interrupt for a PHY device✨
phy_get(9)lookup and obtain a reference to a phy.✨
phy_get_c45_ids(9)Read 802.3-c45 IDs for phy device.✨
phy_get_eee_err(9)report the EEE wake error count✨
phy_get_internal_delay(9)returns the index of the internal delay✨
phy_get_mac_termination(9)stores MAC termination in @val✨
phy_get_manual_rx_polarity(9)Get manual RX polarity for PHY differential lane✨
phy_get_manual_tx_polarity(9)Get manual TX polarity for PHY differential lane✨
phy_get_next_update_time(9)Determine the next PHY update time✨
phy_get_non_dummy_port(9)This method returns the port currently containing this phy. If the phy is currently contained by the dummy port, then the phy is considered to not be part of a port.✨
phy_get_pause(9)resolve negotiated pause modes✨
phy_get_rate_matching(9)determine if rate matching is supported✨
phy_get_rx_polarity(9)Get RX polarity for PHY differential lane✨
phy_get_sfp_port(9)Returns the first valid SFP port of a PHY✨
phy_get_tx_amplitude_gain(9)stores tx amplitude gain in @val✨
phy_get_tx_polarity(9)Get TX polarity for PHY differential lane✨
phy_has_hwtstamp(9)Tests whether a PHY time stamp configuration.✨
phy_has_rxtstamp(9)Tests whether a PHY supports receive time stamping.✨
phy_has_tsinfo(9)Tests whether a PHY reports time stamping and/or PTP hardware clock capabilities.✨
phy_has_txtstamp(9)Tests whether a PHY supports transmit time stamping.✨
phy_id_compare(9)compare @id1 with @id2 taking account of @mask✨
phy_id_compare_model(9)compare @id with @model mask✨
phy_id_compare_vendor(9)compare @id with @vendor mask✨
phy_inband_caps(9)query which in-band signalling modes are supported✨
phy_init(9)phy internal initialization before phy operation✨
phy_init_eee(9)init and check the EEE feature✨
phy_InitBBRFRegisterDefinition(9)Initialize Register definition offset for Radio Path A/B/C/D✨
phy_interface_is_rgmii(9)Convenience function for testing if a PHY interface is RGMII (all variants)✨
phy_interface_mode_is_8023z(9)does the PHY interface mode use 802.3z negotiation✨
phy_interface_mode_is_rgmii(9)Convenience function for testing if a PHY interface mode is RGMII (all variants)✨
phy_interface_num_ports(9)Return the number of links that can be carried by a given MAC-PHY physical link. Returns 0 if this is unknown, the number of links else.✨
phy_interrupt(9)PHY interrupt handler✨
phy_interrupt_is_valid(9)Convenience function for testing a given PHY irq✨
phy_is_default_hwtstamp(9)Is the PHY hwtstamp the default timestamp✨
phy_is_pseudo_fixed_link(9)Convenience function for testing if this PHY is the CPU port facing side of an Ethernet switch, or similar.✨
phy_is_started(9)Convenience function to check whether PHY is started✨
phy_loopback(9)Configure loopback mode of PHY✨
phy_mac_interrupt(9)MAC says the link has changed✨
phy_may_wakeup(9)indicate whether PHY has wakeup enabled✨
phy_mdm6600_cmd(9)send a command request to mdm6600✨
phy_mdm6600_device_power_off(9)power off mdm6600 device✨
phy_mdm6600_device_power_on(9)power on mdm6600 device✨
phy_mdm6600_init_irq(9)initialize mdm6600 status IRQ lines✨
phy_mdm6600_init_lines(9)initialize mdm6600 GPIO lines✨
phy_mdm6600_status(9)read mdm6600 status lines✨
phy_mdm6600_wakeirq_thread(9)handle mode1 line OOB wake after booting✨
phy_mii_ioctl(9)generic PHY MII ioctl interface✨
phy_modes(9)map phy_interface_t enum to device tree binding of phy-mode✨
phy_modify(9)Convenience function for modifying a given PHY register✨
phy_modify_changed(9)Function for modifying a PHY register✨
phy_modify_mmd(9)Convenience function for modifying a register on MMD✨
phy_modify_mmd_changed(9)Function for modifying a register on MMD✨
phy_modify_paged(9)Convenience function for modifying a paged register✨
phy_modify_paged_changed(9)Function for modifying a paged register✨
phy_module_driver(9)Helper macro for registering PHY drivers✨
phy_notify_connect(9)phy connect notification✨
phy_notify_disconnect(9)phy disconnect notification✨
phy_notify_state(9)phy state notification✨
phy_of_parse_port(9)Create a phy_port from a firmware representation✨
phy_on_sfp(9)Convenience function for testing if a PHY is on an SFP module✨
phy_package_join(9)join a common PHY group✨
phy_package_leave(9)leave a common PHY group✨
phy_package_lock(9)acquire the PHY package lock✨
phy_package_unlock(9)release the PHY package lock✨
phy_poll_reset(9)Safely wait until a PHY reset has properly completed✨
phy_polling_mode(9)Convenience function for testing whether polling is used to detect PHY status changes✨
phy_port_alloc(9)Allocate a new phy_port✨
phy_port_destroy(9)Free a struct phy_port✨
phy_port_filter_supported(9)Make sure that port->supported match port->mediums✨
phy_port_get_type(9)get the PORT_* attribute for that port.✨
phy_port_restrict_mediums(9)Mask away some of the port's supported mediums✨
phy_port_update_supported(9)Setup the port->supported field✨
phy_power_off(9)Disable the phy.✨
phy_power_on(9)Enable the phy and enter proper operation✨
phy_prepare_link(9)prepares the PHY layer to monitor link status✨
phy_print_status(9)Convenience function to print out the current phy status✨
phy_probe(9)probe and init a PHY device✨
phy_put(9)release the PHY✨
PHY_QueryBBReg_8723B(9)Read "specific bits" from BB register.✨
PHY_QueryRFReg_8723B(9)Query "Specific bits" to RF register (page 8~).✨
phy_queue_state_machine(9)Trigger the state machine to run soon✨
phy_rate_matching_to_str(9)Return a string describing the rate matching✨
phy_read(9)Convenience function for reading a given PHY register✨
phy_read_mmd(9)Convenience function for reading a register from an MMD on a given PHY.✨
phy_read_mmd_poll_timeout(9)Periodically poll a PHY register until a condition is met or a timeout occurs✨
phy_read_paged(9)Convenience function for reading a paged register✨
phy_register_fixup(9)creates a new phy_fixup and adds it to the list✨
phy_release(9)release the phy✨
phy_remove_link_mode(9)Remove a supported link mode✨
phy_remove_lookup(9)find and remove PHY/device association✨
phy_request_interrupt(9)request and enable interrupt for a PHY device✨
phy_reset_after_clk_enable(9)perform a PHY reset if needed✨
phy_resolve_aneg_linkmode(9)resolve the advertisements into PHY settings✨
phy_resolve_aneg_pause(9)Determine pause autoneg results✨
phy_restart_aneg(9)restart auto-negotiation✨
phy_restore_page(9)restore the page register and release the bus lock✨
phy_RFSerialWrite_8723B(9)Write data to RF register (page 8~).✨
phy_sanitize_settings(9)make sure the PHY is set to supported speed and duplex✨
phy_save_page(9)take the bus lock and save the current page✨
phy_select_page(9)take the bus lock, save the current page, and set a page✨
phy_set_asym_pause(9)Configure Pause and Asym Pause✨
phy_set_bits(9)Convenience function for setting bits in a PHY register✨
phy_set_bits_mmd(9)Convenience function for setting bits in a register on MMD✨
phy_set_max_speed(9)Set the maximum speed the PHY should support✨
phy_set_sym_pause(9)Configure symmetric Pause✨
PHY_SetBBReg_8723B(9)Write "Specific bits" to BB register (page 8~).✨
PHY_SetRFReg_8723B(9)Write "Specific bits" to RF register (page 8~).✨
phy_sfp_attach(9)attach the SFP bus to the PHY upstream network device✨
phy_sfp_connect_phy(9)Connect the SFP module's PHY to the upstream PHY✨
phy_sfp_detach(9)detach the SFP bus from the PHY upstream network device✨
phy_sfp_disconnect_phy(9)Disconnect the SFP module's PHY from the upstream PHY✨
phy_sfp_probe(9)probe for a SFP cage attached to this PHY device✨
phy_speed_down(9)set speed to lowest speed supported by both link partners✨
phy_speed_to_str(9)Return a string representing the PHY link speed✨
phy_speed_up(9)(re)set advertised speeds to all supported speeds✨
phy_start(9)start or restart a PHY device✨
phy_start_aneg(9)start auto-negotiation for this PHY device✨
phy_start_cable_test(9)Start a cable test✨
phy_start_cable_test_tdr(9)Start a raw TDR cable test✨
phy_start_machine(9)start PHY state machine tracking✨
phy_state_machine(9)Handle the state machine✨
phy_stop(9)Bring down the PHY link, and stop checking the status✨