📦 linux-manual

82568 pages · page 23 of 413

A (continued)

asymmetric_key_generate_id(9)Construct an asymmetric key ID✨
asymmetric_key_hex_to_key_id(9)Convert a hex string into a key ID.✨
asymmetric_key_id_partial(9)Return true if two asymmetric keys IDs partially match✨
asymmetric_key_id_same(9)Return true if two asymmetric keys IDs are the same.✨
asymmetric_key_subtype(9)Get the subtype from an asymmetric key✨
asymmetric_match_key_ids(9)Search asymmetric key IDs 1 & 2✨
asymmetric_verify_common(9)- sigv2 and sigv3 common verify function✨
asymmetric_verify_v3_hashless(9)Use hashless signature verification on sigv3✨
async_callback_t(9)A type definition for an asynchronous callback function.✨
async_gen_syndrome(9)asynchronously calculate a raid6 syndrome✨
async_gfx_ring (int)(9)✨
async_memcpy(9)attempt to copy memory with a dma engine.✨
async_raid6_2data_recov(9)asynchronously calculate two missing data blocks✨
async_raid6_datap_recov(9)asynchronously calculate a data and the 'p' block✨
async_release(9)Process QTEE async release requests.✨
async_schedule(9)schedule a function for asynchronous execution✨
async_schedule_dev(9)A device specific version of async_schedule✨
async_schedule_dev_domain(9)A device specific version of async_schedule_domain✨
async_schedule_dev_nocall(9)A simplified variant of async_schedule_dev()✨
async_schedule_domain(9)schedule a function for asynchronous execution within a certain domain✨
async_schedule_node(9)NUMA specific version of async_schedule✨
async_schedule_node_domain(9)NUMA specific version of async_schedule_domain✨
async_synchronize_cookie(9)synchronize asynchronous function calls with cookie checkpointing✨
async_synchronize_cookie_domain(9)synchronize asynchronous function calls within a certain domain with cookie checkpointing✨
async_synchronize_full(9)synchronize all asynchronous function calls✨
async_synchronize_full_domain(9)synchronize all asynchronous function within a certain domain✨
async_syndrome_val(9)asynchronously validate a raid6 syndrome✨
async_trigger_callback(9)schedules the callback function to be run✨
async_tx_channel_switch(9)queue an interrupt descriptor with a dependency pre-attached.✨
async_tx_issue_pending(9)send pending descriptor to the hardware channel✨
async_tx_quiesce(9)ensure tx is complete and freeable upon return✨
async_tx_sync_epilog(9)actions to take if an operation is run synchronously✨
async_xor(9)attempt to xor a set of blocks with a dma engine.✨
async_xor_offs(9)attempt to xor a set of blocks with a dma engine.✨
async_xor_val_offs(9)attempt a xor parity check with a dma engine.✨
Asynchronous AEAD Request Handle(9)✨
Asynchronous Compression API(9)✨
asynchronous flip implementation(9)✨
Asynchronous Hash Request Handle(9)✨
Asynchronous Message Digest API(9)✨
at91_mailbox_read(9)read CAN msg from mailbox✨
at91_pm_switch_ba_to_auto(9)Configure Backup Unit Power Switch to automatic/hardware mode.✨
at91_rx_overflow_err(9)send error frame due to rx overflow✨
at_dma_off(9)disable DMA controller✨
ata_acpi_cbl_pata_type(9)Return PATA cable type✨
ata_acpi_dev_manage_restart(9)if the disk should be stopped (spun down) on system restart.✨
ata_acpi_dissociate(9)dissociate ATA host from ACPI objects✨
ata_acpi_exec_tfs(9)get then write drive taskfile settings✨
ata_acpi_gtm(9)execute _GTM✨
ata_acpi_gtm_xfermask(9)determine xfermode from GTM parameter✨
ata_acpi_handle_hotplug(9)ACPI event handler backend✨
ata_acpi_on_devcfg(9)ATA ACPI hook called on device donfiguration✨
ata_acpi_on_disable(9)ATA ACPI hook called when a device is disabled✨
ata_acpi_on_resume(9)ATA ACPI hook called on resume✨
ata_acpi_port_power_on(9)set the power state of the ata port to D0✨
ata_acpi_push_id(9)send Identify data to drive✨
ata_acpi_run_tf(9)send taskfile registers to host controller✨
ata_acpi_set_state(9)set the port power state✨
ata_acpi_stm(9)execute _STM✨
ata_bmdma_dumb_qc_prep(9)Prepare taskfile for submission✨
ata_bmdma_error_handler(9)Stock error handler for BMDMA controller✨
ata_bmdma_fill_sg(9)Fill PCI IDE PRD table✨
ata_bmdma_fill_sg_dumb(9)Fill PCI IDE PRD table✨
ata_bmdma_interrupt(9)Default BMDMA ATA host interrupt handler✨
ata_bmdma_irq_clear(9)Clear PCI IDE BMDMA interrupt.✨
ata_bmdma_port_intr(9)Handle BMDMA port interrupt✨
ata_bmdma_port_start(9)Set port up for bmdma.✨
ata_bmdma_port_start32(9)Set port up for dma.✨
ata_bmdma_post_internal_cmd(9)Stock post_internal_cmd for BMDMA✨
ata_bmdma_qc_issue(9)issue taskfile to a BMDMA controller✨
ata_bmdma_qc_prep(9)Prepare taskfile for submission✨
ata_bmdma_setup(9)Set up PCI IDE BMDMA transaction✨
ata_bmdma_start(9)Start a PCI IDE BMDMA transaction✨
ata_bmdma_status(9)Read PCI IDE BMDMA status✨
ata_bmdma_stop(9)Stop PCI IDE BMDMA transfer✨
ata_build_rw_tf(9)Build ATA taskfile for given read/write request✨
ata_cable_40wire(9)return 40 wire cable type✨
ata_cable_80wire(9)return 80 wire cable type✨
ata_cable_ignore(9)return ignored PATA cable.✨
ata_cable_sata(9)return SATA cable type✨
ata_cable_unknown(9)return unknown PATA cable.✨
ata_change_queue_depth(9)Set a device maximum queue depth✨
ata_cmd_ioctl(9)Handler for HDIO_DRIVE_CMD ioctl✨
ata_data_xfer_8bit(9)Transfer data by 8bit PIO✨
ata_dev_acpi_handle(9)provide the acpi_handle for an ata_device✨
ata_dev_classify(9)determine device type based on ATA-spec signature✨
ata_dev_configure(9)Configure the specified ATA/ATAPI device✨
ata_dev_disable(9)disable ATA device✨
ata_dev_free_resources(9)Free a device resources✨
ata_dev_get_GTF(9)get the drive bootup default taskfile settings✨
ata_dev_init(9)Initialize an ata_device structure✨
ata_dev_init_params(9)Issue INIT DEV PARAMS command✨
ata_dev_next(9)device iteration helper✨
ata_dev_pair(9)return other device on cable✨
ata_dev_phys_link(9)find physical link for a device✨
ata_dev_power_set_active(9)Set a device power mode to active✨
ata_dev_power_set_standby(9)Set a device power mode to standby✨
ata_dev_read_id(9)Read ID data from the specified device✨
ata_dev_reread_id(9)Re-read IDENTIFY data✨
ata_dev_revalidate(9)Revalidate ATA device✨
ata_dev_same_device(9)Determine whether new ID matches configured device✨
ata_dev_select(9)Select device 0/1 on ATA bus✨
ata_dev_set_feature(9)Issue SET FEATURES✨
ata_dev_set_xfermode(9)Issue SET FEATURES - XFER MODE command✨
ata_dev_xfermask(9)Compute supported xfermask of the given device✨
ata_devchk(9)PATA device presence detection✨
ata_do_dev_read_id(9)default ID read method✨
ata_down_xfermask_limit(9)adjust dev xfer masks downward✨
ata_dsm_trim_pages(9)maximum DSM TRIM payload for a device, in 512-byte pages✨
ata_dump_id(9)IDENTIFY DEVICE info debugging output✨
ata_eh_about_to_do(9)about to perform eh_action✨
ata_eh_acquire(9)acquire EH ownership✨
ata_eh_analyze_ncq_error(9)analyze NCQ error✨
ata_eh_analyze_serror(9)analyze SError for a failed port✨
ata_eh_analyze_tf(9)analyze taskfile of a failed qc✨
ata_eh_autopsy(9)analyze error and determine recovery action✨
ata_eh_decide_disposition(9)Disposition a qc based on sense data✨
ata_eh_detach_dev(9)detach ATA device✨
ata_eh_done(9)EH action complete✨
ata_eh_finish(9)finish up EH✨
ata_eh_freeze_port(9)EH helper to freeze port✨
ata_eh_get_ncq_success_sense(9)Read and process the sense data for successful NCQ commands log page✨
ata_eh_handle_port_resume(9)perform port resume operation✨
ata_eh_handle_port_suspend(9)perform port suspend operation✨
ata_eh_link_autopsy(9)analyze error and determine recovery action✨
ata_eh_link_report(9)report error handling to user✨
ata_eh_link_set_lpm(9)configure SATA interface power management✨
ata_eh_maybe_retry_flush(9)Retry FLUSH if necessary✨
ata_eh_qc_complete(9)Complete an active ATA command from EH✨
ata_eh_qc_retry(9)Tell midlayer to retry an ATA command after EH✨
ata_eh_quiet(9)check if we need to be quiet about a command error✨
ata_eh_read_log_10h(9)Read log page 10h for NCQ error details✨
ata_eh_recover(9)recover host port after error✨
ata_eh_release(9)release EH ownership✨
ata_eh_report(9)report error handling to user✨
ata_eh_request_sense(9)perform REQUEST_SENSE_DATA_EXT✨
ata_eh_set_mode(9)Program timings and issue SET FEATURES - XFER✨
ata_eh_set_pending(9)set ATA_PFLAG_EH_PENDING and activate fast drain✨
ata_eh_speed_down(9)record error and speed down if necessary✨
ata_eh_speed_down_verdict(9)Determine speed down verdict✨
ata_eh_thaw_port(9)EH helper to thaw port✨
ata_eh_worth_retry(9)analyze error and decide whether to retry✨
ata_ehi_clear_desc(9)clean error description✨
ata_ehi_push_desc(9)push error description with separator✨
ata_err_string(9)convert err_mask to descriptive string✨
ata_exec_internal(9)execute libata internal command✨
ata_finalize_port_ops(9)finalize ata_port_operations✨
ata_force_cbl(9)force cable type according to libata.force✨
ata_force_link_limits(9)force link limits according to libata.force✨
ata_force_pflags(9)force port flags according to libata.force✨
ata_force_quirks(9)force quirks according to libata.force✨
ata_force_xfermask(9)force xfermask according to libata.force✨
ata_format_dsm_trim_descr(9)SATL Write Same to DSM Trim✨
ata_gen_ata_sense(9)generate a SCSI fixed sense block✨
ata_generic_init_one(9)attach generic IDE✨
ata_get_cmd_name(9)get name for ATA command✨
ata_get_identity(9)Handler for HDIO_GET_IDENTITY ioctl✨
ata_get_xlat_func(9)check if SCSI to ATA translation is possible✨
ata_host_activate(9)start host, request IRQ and register it✨
ata_host_alloc(9)allocate and init basic ATA host resources✨
ata_host_alloc_pinfo(9)alloc host and init with port_info array✨
ata_host_detach(9)Detach all ports of an ATA host✨
ata_host_init(9)Initialize a host struct for sas (ipr, libsas)✨
ata_host_register(9)register initialized ATA host✨
ata_host_resume(9)resume host✨
ata_host_start(9)start and freeze ports of an ATA host✨
ata_host_suspend(9)suspend host✨
ata_hpa_resize(9)Resize a device with an HPA set✨
ata_hsm_ok_in_wq(9)Check if the qc can be handled in the workqueue.✨
ata_hsm_qc_complete(9)finish a qc running on standard HSM✨
ata_id_c_string(9)Convert IDENTIFY DEVICE page into C string✨
ata_id_major_version(9)get ATA level of drive✨
ata_id_string(9)Convert IDENTIFY DEVICE page into string✨
ata_id_xfermask(9)Compute xfermask from the given IDENTIFY data✨
ata_internal_cmd_timed_out(9)notification for internal command timeout✨
ata_internal_cmd_timeout(9)determine timeout for an internal command✨
ata_is_40wire(9)check drive side detection✨
ata_is_ata_dev(9)- check if a struct device represents a ATA device✨
ata_is_link(9)- check if a struct device represents a ATA link✨
ata_is_port(9)- check if a struct device represents a ATA port✨
ata_link_abort(9)abort all qc's on the link✨
ata_link_init(9)Initialize an ata_link structure✨
ata_link_next(9)link iteration helper✨
ata_link_offline(9)test whether the given link is offline✨
ata_link_online(9)test whether the given link is online✨
ata_mode_string(9)convert xfer_mask to string✨
ata_mselect_caching(9)Simulate MODE SELECT for caching info page✨
ata_mselect_control(9)Simulate MODE SELECT for control page✨
ata_msense_caching(9)Simulate MODE SENSE caching info page✨
ata_msense_control(9)Simulate MODE SENSE control mode page✨
ata_msense_rw_recovery(9)Simulate MODE SENSE r/w error recovery page✨
ata_msleep(9)ATA EH owner aware msleep✨
ata_ncq_enabled(9)Test whether NCQ is enabled✨
ata_ncq_prio_enable(9)Enable/disable NCQ Priority✨
ata_ncq_prio_enabled(9)Check if NCQ Priority is enabled✨
ata_ncq_prio_supported(9)Check if device supports NCQ Priority✨
ata_ncq_supported(9)Test whether NCQ is supported✨
ata_pack_xfermask(9)Pack pio, mwdma and udma masks into xfer_mask✨
ata_pci_bmdma_clear_simplex(9)attempt to kick device out of simplex✨
ata_pci_bmdma_init(9)acquire PCI BMDMA resources and init ATA host✨