ata_dev_classify(9)

💅 ata_dev_classify(9) 💅

okay so bestie, this page is straight outta the Kernel API Manual and it's literally about figuring out what kind of ATA device you're looking at. no cap, it's giving main character energy for libata-core.c 🦋✨

---

✨ NAME ✨

ata_dev_classify — determine device type based on ATA-spec signature 👑

🎀 SYNOPSIS 🎀

unsigned int ata_dev_classify (const struct ata_taskfile *tf );

🌈 ARGUMENTS 🌈

• tf — ATA taskfile register set for device to be identified 🎯

💖 DESCRIPTION 💖

Okay so here's the tea: this function looks at the taskfile register contents and determines whether a device is ATA or ATAPI, exactly as per the "Signature and persistence" section of the ATA/PI spec (volume 1, sect 5.14) 📖. Like, it's literally reading the vibe of the registers and classifying the device. slay.

LOCKING: None. not me having zero locking, it's giving effortless 💅

🔥 RETURN 🔥

It hands back the device type: ATA_DEV_ATA, ATA_DEV_ATAPI, ATA_DEV_PMP, ATA_DEV_ZAC, or ATA_DEV_UNKNOWN in the event of failure 😭. So yeah, five possible outcomes, periodt.

🦋 SEE ALSO 🦋

Kernel file ./drivers/ata/libata-core.c — and honestly the whole friend group is here, so let me list every single one because we don't skip anyone in this house 🫶:

• ata_link_next(9)
• ata_dev_next(9)
• ata_dev_phys_link(9)
• ata_force_cbl(9)
• ata_force_pflags(9)
• ata_force_link_limits(9)
• ata_force_xfermask(9)
• ata_force_quirks(9)
• atapi_cmd_type(9)
• ata_set_rwcmd_protocol(9)
• ata_tf_read_block(9)
• ata_build_rw_tf(9)
• ata_pack_xfermask(9)
• ata_unpack_xfermask(9)
• ata_xfer_mask2mode(9)
• ata_xfer_mode2mask(9)
• ata_xfer_mode2shift(9)
• ata_mode_string(9)
• ata_id_string(9)
• ata_id_c_string(9)
• ata_read_native_max_address(9)
• ata_set_max_sectors(9)
• ata_hpa_resize(9)
• ata_dump_id(9)
• ata_id_xfermask(9)
• ata_exec_internal(9)
• ata_pio_need_iordy(9)
• ata_pio_mask_no_iordy(9)
• ata_do_dev_read_id(9)
• ata_dev_read_id(9)
• ata_dev_power_set_standby(9)
• ata_dev_power_set_active(9)
• ata_read_log_page(9)
• ata_dev_configure(9)
• ata_cable_40wire(9)
• ata_cable_80wire(9)
• ata_cable_unknown(9)
• ata_cable_ignore(9)
• ata_cable_sata(9)
• sata_print_link_status(9)
• ata_dev_pair(9)
• ata_timing_cycle2mode(9)
• ata_down_xfermask_limit(9)
• ata_set_mode(9)
• ata_wait_ready(9)
• ata_wait_after_reset(9)
• ata_std_prereset(9)
• ata_std_postreset(9)
• ata_dev_same_device(9)
• ata_dev_reread_id(9)
• ata_dev_revalidate(9)
• ata_is_40wire(9)
• cable_is_40wire(9)
• ata_dev_xfermask(9)
• ata_dev_set_xfermode(9)
• ata_dev_set_feature(9)
• ata_dev_init_params(9)
• atapi_check_dma(9)
• ata_std_qc_defer(9)
• ata_sg_init(9)
• ata_sg_clean(9)
• ata_sg_setup(9)
• swap_buf_le16(9)
• ata_qc_free(9)
• ata_qc_complete(9)
• ata_qc_get_active(9)
• ata_qc_issue(9)
• ata_phys_link_online(9)
• ata_phys_link_offline(9)
• ata_link_online(9)
• ata_link_offline(9)
• ata_host_suspend(9)
• ata_host_resume(9)
• ata_dev_init(9)
• ata_link_init(9)
• sata_link_init_spd(9)
• ata_port_alloc(9)
• ata_host_alloc(9)
• ata_host_alloc_pinfo(9)
• ata_finalize_port_ops(9)
• ata_host_start(9)
• ata_host_init(9)
• ata_host_register(9)
• ata_host_activate(9)
• ata_dev_free_resources(9)
• ata_port_detach(9)
• ata_host_detach(9)
• ata_pci_remove_one(9)
• ata_platform_remove_one(9)
• ata_msleep(9)
• ata_wait_register(9)

---

okay that's the whole page bestie! this came from the ./drivers/ata source, dated October 2026, and it's ata_dev_classify(9) — mwah 💋✨