ata_dev_same_device(9)

Hey bestie 💖 you found ata_dev_same_device(9) — yes, that's from the Kernel API Manual — and honestly she's giving tiny-but-important gatekeeper energy 👑. Let's get into it.

✨ NAME ✨

ata_dev_same_device — Determine whether new ID matches configured device.

🛠️ SYNOPSIS 🛠️

Keep the spacing exactly as-is, bestie 🫶:

int ata_dev_same_device (struct ata_device *dev , unsigned int new_class
       , const u16 *new_id );

🎀 ARGUMENTS 🎀

• dev — the device to compare against.
• new_class — class of the new device.
• new_id — IDENTIFY page of the new device.

💖 DESCRIPTION 💖

She compares new_class and new_id against dev and determines whether dev is the device indicated by new_class and new_id. That's the whole vibe 💅.

LOCKING: None. No locks, no drama.

🔥 RETURN 🔥

1 if dev matches new_class and new_id, 0 otherwise. Periodt.

🌈 SEE ALSO 🌈

Kernel file ./drivers/ata/libata-core.c — plus the whole friend group: ata_link_next(9), ata_dev_next(9), ata_dev_phys_link(9), ata_force_cbl(9), ata_force_pflags(9), ata_force_link_limits(9), ata_force_xfermask(9), ata_force_quirks(9), atapi_cmd_type(9), ata_set_rwcmd_protocol(9), ata_tf_read_block(9), ata_build_rw_tf(9), ata_pack_xfermask(9), ata_unpack_xfermask(9), ata_xfer_mask2mode(9), ata_xfer_mode2mask(9), ata_xfer_mode2shift(9), ata_mode_string(9), ata_dev_classify(9), ata_id_string(9), ata_id_c_string(9), ata_read_native_max_address(9), ata_set_max_sectors(9), ata_hpa_resize(9), ata_dump_id(9), ata_id_xfermask(9), ata_exec_internal(9), ata_pio_need_iordy(9), ata_pio_mask_no_iordy(9), ata_do_dev_read_id(9), ata_dev_read_id(9), ata_dev_power_set_standby(9), ata_dev_power_set_active(9), ata_read_log_page(9), ata_dev_configure(9), ata_cable_40wire(9), ata_cable_80wire(9), ata_cable_unknown(9), ata_cable_ignore(9), ata_cable_sata(9), sata_print_link_status(9), ata_dev_pair(9), ata_timing_cycle2mode(9), ata_down_xfermask_limit(9), ata_set_mode(9), ata_wait_ready(9), ata_wait_after_reset(9), ata_std_prereset(9), ata_std_postreset(9), ata_dev_reread_id(9), ata_dev_revalidate(9), ata_is_40wire(9), cable_is_40wire(9), ata_dev_xfermask(9), ata_dev_set_xfermode(9), ata_dev_set_feature(9), ata_dev_init_params(9), atapi_check_dma(9), ata_std_qc_defer(9), ata_sg_init(9), ata_sg_clean(9), ata_sg_setup(9), swap_buf_le16(9), ata_qc_free(9), ata_qc_complete(9), ata_qc_get_active(9), ata_qc_issue(9), ata_phys_link_online(9), ata_phys_link_offline(9), ata_link_online(9), ata_link_offline(9), ata_host_suspend(9), ata_host_resume(9), ata_dev_init(9), ata_link_init(9), sata_link_init_spd(9), ata_port_alloc(9), ata_host_alloc(9), ata_host_alloc_pinfo(9), ata_finalize_port_ops(9), ata_host_start(9), ata_host_init(9), ata_host_register(9), ata_host_activate(9), ata_dev_free_resources(9), ata_port_detach(9), ata_host_detach(9), ata_pci_remove_one(9), ata_platform_remove_one(9), ata_msleep(9), ata_wait_register(9).

Made with love in ./drivers/ata 💖 October 2026 — ata_dev_same_device(9), out ✨