📦 linux-manual
82568 pages · page 21 of 413
A (continued)
- ap_tapq(9)Test adjunct processor queue.✨
- ap_tasklet_fn(9)Tasklet to poll all AP devices.✨
- ap_test_queue(9)Test adjunct processor queue.✨
- ap_uevent(9)Uevent function for AP devices.✨
- aperture_remove_all_conflicting_devices(9)remove all existing framebuffers✨
- aperture_remove_conflicting_devices(9)remove devices in the given range✨
- aperture_remove_conflicting_pci_devices(9)remove existing framebuffers for PCI devices✨
- api_chain_free(9)free API CMD specific chain✨
- api_chain_init(9)initialize API CMD specific chain✨
- api_cmd(9)API CMD command✨
- api_cmd_chain_hw_clean(9)clean the HW✨
- api_cmd_chain_hw_init(9)initialize the chain in the HW✨
- api_cmd_create_cell(9)create API CMD cell for specific chain✨
- api_cmd_create_cells(9)create API CMD cells for specific chain✨
- api_cmd_create_chain(9)create API CMD specific chain✨
- api_cmd_ctrl_init(9)set the control register of a chain✨
- api_cmd_destroy_cell(9)destroy API CMD cell of specific chain✨
- api_cmd_destroy_cells(9)destroy API CMD cells of specific chain✨
- api_cmd_destroy_chain(9)destroy API CMD specific chain✨
- api_cmd_head_init(9)set the head of a chain in the HW✨
- api_cmd_hw_restart(9)restart the chain in the HW✨
- api_cmd_set_num_cells(9)set the number cells of a chain in the HW✨
- api_cmd_set_status_addr(9)set the status address of a chain in the HW✨
- api_cmd_status_update(9)update the status in the chain struct✨
- apic_bsp_setup(9)Setup function for local apic and io-apic✨
- apic_soft_disable(9)Clears and software disables the local APIC on hotplug✨
- apm_bios_call(9)Make an APM BIOS 32bit call (on CPU 0)✨
- apm_bios_call_simple(9)make a simple APM BIOS 32bit call✨
- apm_console_blank(9)blank the display✨
- apm_cpu_idle(9)cpu idling for APM capable Linux✨
- apm_do_busy(9)inform the BIOS the CPU is busy✨
- apm_do_idle(9)perform power saving✨
- apm_driver_version(9)APM driver version✨
- apm_enable_power_management(9)enable BIOS APM power management✨
- apm_engage_power_management(9)enable PM on a device✨
- apm_error(9)display an APM error✨
- apm_get_event(9)get an APM event from the BIOS✨
- apm_get_power_status(9)get current power state✨
- apm_power_off(9)ask the BIOS to power off✨
- apm_queue_event(9)queue an APM event for kapmd✨
- apmt_add_platform_device(9)Allocate a platform device for APMT node✨
- apparmor_bprm_committed_creds(9)do cleanup after new creds committed✨
- apparmor_bprm_committing_creds(9)do task cleanup on committing new creds✨
- apparmor_bprm_creds_for_exec(9)Update the new creds on the bprm struct✨
- apparmor_sk_clone_security(9)clone the sk_security field✨
- apparmor_sock_graft(9)Initialize newly created socket✨
- apparmor_socket_bind(9)check perms before bind addr to socket✨
- apparmor_socket_getpeersec_dgram(9)get security label of packet✨
- apparmor_socket_getpeersec_stream(9)get security context of peer✨
- apparmor_socket_post_create(9)setup the per-socket security struct✨
- apparmor_socket_sock_rcv_skb(9)check perms before associating skb to sk✨
- apparmor_unix_may_send(9)check perms before conn or sending unix dgrams✨
- apparmor_unix_stream_connect(9)check perms before making unix domain conn✨
- apparmor_uring_override_creds(9)check the requested cred override✨
- apparmor_uring_sqpoll(9)check if a io_uring polling thread can be created✨
- append_desc_queue(9)Queuing descriptor✨
- append_oa_sample(9)Copies single OA report into userspace read() buffer.✨
- append_oa_status(9)Appends a status record to a userspace read() buffer.✨
- append_proto_dkp(9)Derived Key Protocol (DKP): key -> split key✨
- append_sector_entries(9)Append an array of recovery journal entries from a journal block sector to the array of numbered mappings in the repair completion, numbering each entry in the order they are appended.✨
- append_tid(9)Append thread ID to the given string.✨
- apple_gmux_detect(9)detect if gmux is built into the machine✨
- apple_gmux_present(9)check if gmux ACPI device is present✨
- apple_smc_enter_atomic(9)Enter atomic mode to be able to use apple_smc_write_atomic✨
- apple_smc_get_key_by_index(9)Given an index return the corresponding SMC key✨
- apple_smc_get_key_info(9)Get key information from SMC✨
- apple_smc_key_exists(9)Check if the given SMC key exists✨
- apple_smc_read(9)Read size bytes from given SMC key into buf✨
- apple_smc_rw(9)Write and then read using the given SMC key✨
- apple_smc_write(9)Write size bytes into given SMC key from buf✨
- apple_smc_write_atomic(9)Write size bytes into given SMC key from buf without sleeping✨
- apply_block_entries(9)Apply all the entries in a block to the reference counts.✨
- apply_constraint(9)Add/modify/remove device PM QoS request.✨
- apply_front_porch_workaround(9)This is a workaround for a bug that has existed since R5xx and has not been fixed keep Front porch at minimum 2 for Interlaced mode or 1 for progressive.✨
- apply_journal_entries(9)Find the relevant vio of the slab journal and apply all valid entries.✨
- apply_link_downgrade_policy(9)Apply the link width downgrade enabled policy against the current active link widths.✨
- apply_mips_fdt_fixups(9)apply fixups to an FDT blob✨
- apply_new_vdo_configuration(9)Attempt to make any configuration changes from the table being resumed.✨
- apply_replay_entry(9)apply a replay entry to the TNC.✨
- apply_replay_list(9)apply the replay list to the TNC.✨
- apply_svp1_workaround(9)Apply workaround required for scenario where svp0_height_next != 0 && svp1_height_next == 0✨
- apply_workqueue_attrs(9)apply new workqueue_attrs to an unbound workqueue✨
- apr_send_pkt(9)Send a apr message from apr device✨
- apu_thermal_cap(9)✨
- ar5008_hw_rf_alloc_ext_banks(9)allocates banks for external radio programming✨
- ar9002_hw_set_channel(9)set channel on single-chip device✨
- ar9002_hw_spur_mitigate(9)convert baseband spur frequency✨
- ar9003_hw_set_channel(9)set channel on single-chip device✨
- ar9003_hw_spur_mitigate_mrc_cck(9)convert baseband spur frequency✨
- arasan_dt_parse_clk_phases(9)Read Clock Delay values from DT✨
- arc_emac_adjust_link(9)Adjust the PHY link duplex.✨
- arc_emac_get_drvinfo(9)Get EMAC driver information.✨
- arc_emac_intr(9)Global interrupt handler for EMAC.✨
- arc_emac_open(9)Open the network device.✨
- arc_emac_poll(9)NAPI poll handler.✨
- arc_emac_restart(9)Restart EMAC✨
- arc_emac_rx(9)processing of Rx packets.✨
- arc_emac_rx_miss_handle(9)handle R_MISS register✨
- arc_emac_rx_stall_check(9)check RX stall✨
- arc_emac_set_address(9)Set the MAC address for this device.✨
- arc_emac_set_rx_mode(9)Change the receive filtering mode.✨
- arc_emac_stats(9)Get system network statistics.✨
- arc_emac_stop(9)Close the network device.✨
- arc_emac_tx(9)Starts the data transmission.✨
- arc_emac_tx_avail(9)Return the number of available slots in the tx ring.✨
- arc_emac_tx_clean(9)clears processed by EMAC Tx BDs.✨
- arc_free_rx_queue(9)free skb from rx queue✨
- arc_free_tx_queue(9)free skb from tx queue✨
- arc_mdio_complete_wait(9)Waits until MDIO transaction is completed.✨
- arc_mdio_probe(9)MDIO probe function.✨
- arc_mdio_read(9)MDIO interface read function.✨
- arc_mdio_remove(9)MDIO remove function.✨
- arc_mdio_reset(9)✨
- arc_mdio_write(9)MDIO interface write function.✨
- arc_reg_clr(9)Applies mask to specified EMAC register - ("reg" & ~"mask").✨
- arc_reg_get(9)Gets value of specified EMAC register.✨
- arc_reg_or(9)Applies mask to specified EMAC register - ("reg" | "mask").✨
- arc_reg_set(9)Sets EMAC register with provided value.✨
- arc_unwind_core(9)Unwind the kernel mode stack for an execution context✨
- arch___change_bit(9)Toggle a bit in memory✨
- arch___clear_bit_unlock(9)Clear a bit in memory, for unlock✨
- arch___test_and_clear_bit(9)Clear a bit and return its old value✨
- arch___test_and_set_bit(9)Set a bit and return its old value✨
- arch_change_bit(9)Toggle a bit in memory✨
- arch_check_elf(9)check an ELF executable✨
- arch_clear_bit(9)Clears a bit in memory✨
- arch_clear_bit_unlock(9)Clear a bit in memory, for unlock✨
- arch_crash_handle_hotplug_event(9)Handle hotplug elfcorehdr changes✨
- arch_disable_smp_support(9)Disables SMP support for x86 at boottime✨
- arch_do_signal_or_restart(9)Architecture specific signal delivery function✨
- arch_elf_pt_proc(9)check a PT_LOPROC..PT_HIPROC ELF program header✨
- arch_enable_hybrid_capacity_scale(9)Enable hybrid CPU capacity scaling✨
- arch_enter_from_user_mode(9)Architecture specific sanity check for user mode regs✨
- arch_exit_to_user_mode(9)Architecture specific final work before exit to user mode.✨
- arch_exit_to_user_mode_prepare(9)Architecture specific preparation for exit to user mode.✨
- arch_exit_to_user_mode_work(9)Architecture specific TIF work for exit to user mode.✨
- arch_ftrace_update_code(9)modify the code to trace or not trace✨
- arch_futex_atomic_op_inuser(9)Atomic arithmetic operation with constant argument and comparison of the previous futex value with another constant.✨
- arch_has_block_step(9)does this CPU support user-mode block-step?✨
- arch_has_single_step(9)does this CPU support user-mode single-step?✨
- arch_hibernation_header_restore(9)read the architecture specific data from the hibernation image header✨
- arch_hibernation_header_save(9)populate the architecture specific part of a hibernation image header✨
- arch_in_rcu_eqs(9)Architecture specific check for RCU extended quiescent states.✨
- arch_irqentry_exit_need_resched(9)Architecture specific need resched function✨
- arch_kexec_kernel_image_probe(9)Does additional handling needed to setup kexec segments.✨
- arch_kexec_locate_mem_hole(9)Find free memory to place the segments.✨
- arch_kimage_file_post_load_cleanup(9)Frees up all the allocations done while loading the image.✨
- arch_numa_init(9)Initialize NUMA✨
- arch_param_cb(9)general callback for a module/cmdline parameter to be evaluated before arch initcall level✨
- arch_phys_wc_add(9)add a WC MTRR and handle errors if PAT is unavailable✨
- arch_ptrace_report_syscall_exit(9)Architecture specific ptrace_report_syscall_exit()✨
- arch_ptrace_report_syscall_permit_entry(9)Architecture specific wrapper for ptrace_report_syscall_permit_entry()✨
- arch_ptrace_stop(9)Do machine-specific work before stopping for ptrace✨
- arch_ptrace_stop_needed(9)Decide whether arch_ptrace_stop() should be called✨
- arch_scale_cpu_capacity(9)get the capacity scale factor of a given CPU.✨
- arch_scale_freq_capacity(9)get the frequency scale factor of a given CPU.✨
- arch_set_bit(9)Atomically set a bit in memory✨
- arch_set_cpu_capacity(9)Set scale-invariance parameters for a CPU✨
- arch_setup_msi_irq(9)setup MSI IRQs for a device✨
- arch_stack_walk(9)Architecture specific function to walk the stack✨
- arch_stack_walk_reliable(9)Architecture specific function to walk the stack reliably✨
- arch_suspend_disable_irqs(9)disable IRQs for suspend✨
- arch_suspend_enable_irqs(9)enable IRQs after suspend✨
- arch_teardown_msi_irq(9)release MSI IRQs for a device✨
- arch_test_and_change_bit(9)Change a bit and return its old value✨
- arch_test_and_clear_bit(9)Clear a bit and return its old value✨
- arch_test_and_set_bit(9)Set a bit and return its old value✨
- arch_test_and_set_bit_lock(9)Set a bit and return its old value, for lock✨
- arch_timer_select_ppi(9)Select suitable PPI for the current system.✨
- arch_uprobe_analyze_insn(9)instruction analysis including validity and fixups.✨
- arch_xfer_to_guest_mode_handle_work(9)Architecture specific xfer to guest mode work handling function.✨
- arena_spin_lock(9)acquire a queued spinlock✨
- arena_spin_trylock(9)try to acquire the queued spinlock✨
- arena_spin_unlock(9)release a queued spinlock✨
- ARGS_SEP_COMMA(9)Definition of a comma character.✨
- argv_free(9)free an argv @argv - the argument vector to be freed✨
- argv_split(9)split a string at whitespace, returning an argv✨
- arizona_set_output_mode(9)Set the mode of the specified output✨
- ARM PrimeCell PL110 and PL111 CLCD Driver(9)✨
- arm64_nmi_cpu_stop(9)stop the local CPU after it is told to stop.✨
- arm_cca_attestation_continue(9)Retrieve the attestation token data.✨
- arm_cca_guest_exit(9)unregister with the Trusted Security Module (TSM) interface.✨
- arm_cca_guest_init(9)Register with the Trusted Security Module (TSM) interface.✨
- arm_cca_report_new(9)Generate a new attestation token.✨
- arm_cpuidle_get_ops(9)find a registered cpuidle_ops by name✨
- arm_cpuidle_init(9)Initialize cpuidle_ops for a specific cpu✨
- arm_cpuidle_read_ops(9)Initialize the cpuidle ops with the device tree✨
- arm_cpuidle_simple_enter(9)a wrapper to cpu_do_idle()✨
- arm_cpuidle_suspend(9)function to enter low power idle states✨
- arm_iommu_attach_device(9)✨
- arm_iommu_create_mapping(9)✨
- arm_iommu_detach_device(9)✨
- arm_iommu_map_phys(9)✨
- arm_iommu_map_sg(9)map a set of SG buffers for streaming mode DMA✨
- arm_iommu_sync_sg_for_cpu(9)✨
- arm_iommu_sync_sg_for_device(9)✨
- arm_iommu_unmap_sg(9)unmap a set of SG buffers mapped by dma_map_sg✨
- arm_mbo(9)recycle MBO for further usage✨
- arm_mbo_chain(9)helper function that arms an MBO chain for the HDM✨
- arm_smccc_1_1_get_conduit(9)✨
💅
getting it ready, bestie…