ata_do_dev_read_id(9)

💖 NAME: ata_do_dev_read_id — default ID read method 💖

okay bestie, this is the Kernel API Manual page for ata_do_dev_read_id(9), and it is literally the default ID read method. No cap.

✨ SYNOPSIS ✨

unsigned int ata_do_dev_read_id (struct ata_device *dev , struct
ata_taskfile *tf , __le16 *id );

🎀 ARGUMENTS 🎀

• dev — device. That's the device, bestie.
• tf — proposed taskfile.
• id — data buffer.

🦋 DESCRIPTION 🦋

So here's the vibe: it issues the identify taskfile and hands back the buffer containing identify data. For some RAID controllers and for pre ATA devices, this function is wrapped or replaced by the driver. periodt.

👑 SEE ALSO 👑

The SEE ALSO section is giving full squad energy, so here is every single one, no cuts:

• Kernel file ./drivers/ata/libata-core.c
• ata_link_next(9)
• ata_dev_next(9)
• ata_dev_phys_link(9)
• ata_force_cbl(9)
• ata_force_pflags(9)
• ata_force_link_limits(9)
• ata_force_xfermask(9)
• ata_force_quirks(9)
• atapi_cmd_type(9)
• ata_set_rwcmd_protocol(9)
• ata_tf_read_block(9)
• ata_build_rw_tf(9)
• ata_pack_xfermask(9)
• ata_unpack_xfermask(9)
• ata_xfer_mask2mode(9)
• ata_xfer_mode2mask(9)
• ata_xfer_mode2shift(9)
• ata_mode_string(9)
• ata_dev_classify(9)
• ata_id_string(9)
• ata_id_c_string(9)
• ata_read_native_max_address(9)
• ata_set_max_sectors(9)
• ata_hpa_resize(9)
• ata_dump_id(9)
• ata_id_xfermask(9)
• ata_exec_internal(9)
• ata_pio_need_iordy(9)
• ata_pio_mask_no_iordy(9)
• ata_dev_read_id(9)
• ata_dev_power_set_standby(9)
• ata_dev_power_set_active(9)
• ata_read_log_page(9)
• ata_dev_configure(9)
• ata_cable_40wire(9)
• ata_cable_80wire(9)
• ata_cable_unknown(9)
• ata_cable_ignore(9)
• ata_cable_sata(9)
• sata_print_link_status(9)
• ata_dev_pair(9)
• ata_timing_cycle2mode(9)
• ata_down_xfermask_limit(9)
• ata_set_mode(9)
• ata_wait_ready(9)
• ata_wait_after_reset(9)
• ata_std_prereset(9)
• ata_std_postreset(9)
• ata_dev_same_device(9)
• ata_dev_reread_id(9)
• ata_dev_revalidate(9)
• ata_is_40wire(9)
• cable_is_40wire(9)
• ata_dev_xfermask(9)
• ata_dev_set_xfermode(9)
• ata_dev_set_feature(9)
• ata_dev_init_params(9)
• atapi_check_dma(9)
• ata_std_qc_defer(9)
• ata_sg_init(9)
• ata_sg_clean(9)
• ata_sg_setup(9)
• swap_buf_le16(9)
• ata_qc_free(9)
• ata_qc_complete(9)
• ata_qc_get_active(9)
• ata_qc_issue(9)
• ata_phys_link_online(9)
• ata_phys_link_offline(9)
• ata_link_online(9)
• ata_link_offline(9)
• ata_host_suspend(9)
• ata_host_resume(9)
• ata_dev_init(9)
• ata_link_init(9)
• sata_link_init_spd(9)
• ata_port_alloc(9)
• ata_host_alloc(9)
• ata_host_alloc_pinfo(9)
• ata_finalize_port_ops(9)
• ata_host_start(9)
• ata_host_init(9)
• ata_host_register(9)
• ata_host_activate(9)
• ata_dev_free_resources(9)
• ata_port_detach(9)
• ata_host_detach(9)
• ata_pci_remove_one(9)
• ata_platform_remove_one(9)
• ata_msleep(9)
• ata_wait_register(9)

xoxo bestie 💋 — this page's source/version is ./drivers/ata, dated October 2026.