📦 linux-manual

82568 pages · page 22 of 413

A (continued)

arm_smccc_1_2_hvc(9)make HVC calls✨
arm_smccc_1_2_smc(9)make SMC calls✨
arm_smccc_get_soc_id_revision(9)✨
arm_smccc_get_soc_id_version(9)✨
arm_smccc_get_version(9)✨
arm_smmu_invs_for_each_cmp(9)Iterate over two sorted arrays computing for arm_smmu_invs_merge() or arm_smmu_invs_unref()✨
arm_smmu_invs_for_each_entry(9)Iterate over all non-trash entries in invs✨
arm_smmu_invs_merge(9)Merge @to_merge into @invs and generate a new array✨
arm_smmu_invs_purge(9)Purge all the trash entries in the @invs✨
arm_smmu_invs_unref(9)Find in @invs for all entries in @to_unref, decrease the user counts without deletions✨
armada_37xx_add_function(9)Add a new function to the list✨
armada_37xx_fill_func(9)complete the funcs array✨
armada_37xx_fill_group(9)complete the group array✨
armoury_attr_uint_show(9)Receive an uint from a WMI method.✨
armoury_attr_uint_store(9)Send an uint to WMI method if within min/max.✨
armoury_get_devstate(9)Get the WMI function state.✨
armoury_has_devstate(9)Check presence of the WMI function state.✨
armoury_set_devstate(9)Set the WMI function state.✨
array3_size(9)Calculate size of 3-dimensional array.✨
ARRAY_ELEM_PTR(9)Obtain the verified pointer to an array element✨
ARRAY_END(9)get a pointer to one past the last element in array @arr✨
array_index_mask_nospec(9)generate a ~0 mask when index < size, 0 otherwise✨
ARRAY_SIZE(9)get the number of elements in array @arr✨
array_size(9)Calculate size of 2-dimensional array.✨
artop6210_load_piomode(9)Load a set of PATA PIO timings✨
artop6210_qc_defer(9)implement serialization✨
artop6210_set_dmamode(9)Initialize host controller PATA PIO timings✨
artop6210_set_piomode(9)Initialize host controller PATA PIO timings✨
artop6260_cable_detect(9)identify cable type✨
artop6260_load_piomode(9)Initialize host controller PATA PIO timings✨
artop6260_set_dmamode(9)Initialize host controller PATA PIO timings✨
artop6260_set_piomode(9)Initialize host controller PATA PIO timings✨
artop62x0_pre_reset(9)probe begin✨
artop_init_one(9)Register ARTOP ATA PCI device with kernel services✨
artpec8_cmu_probe(9)Probe function for ARTPEC platform clocks✨
as10x_cmd_add_PID_filter(9)send add filter command to AS10x✨
as10x_cmd_build(9)build AS10x command header✨
as10x_cmd_del_PID_filter(9)Send delete filter command to AS10x✨
as10x_cmd_eLNA_change_mode(9)send eLNA change mode command to AS10x✨
as10x_cmd_get_context(9)Send get context command to AS10x✨
as10x_cmd_get_demod_stats(9)send get demod stats command to AS10x✨
as10x_cmd_get_impulse_resp(9)send get impulse response command to AS10x✨
as10x_cmd_get_tps(9)send get TPS command to AS10x✨
as10x_cmd_get_tune_status(9)send get tune status command to AS10x✨
as10x_cmd_set_context(9)send set context command to AS10x✨
as10x_cmd_set_tune(9)send set tune command to AS10x✨
as10x_cmd_start_streaming(9)Send start streaming command to AS10x✨
as10x_cmd_stop_streaming(9)Send stop streaming command to AS10x✨
as10x_cmd_turn_off(9)send turn off command to AS10x✨
as10x_cmd_turn_on(9)send turn on command to AS10x✨
as10x_context_rsp_parse(9)Parse context command response✨
as10x_rsp_parse(9)Parse command response✨
as3645a_set_control(9)Set flash control register✨
as3645a_set_current(9)Set flash configuration registers✨
as_flusher(9)Convert a generic vdo_completion to a flusher.✨
as_logical_zone(9)Convert a generic vdo_completion to a logical_zone.✨
as_notifier(9)Convert a generic vdo_completion to a read_only_notifier.✨
as_repair_completion(9)Convert a generic completion to a repair_completion.✨
as_vio(9)Convert a generic vdo_completion to a vio.✨
ascii2desc(9)Helper routine for producing UTF-16LE string descriptors✨
ascot2e_attach(9)Attach an ascot2e tuner✨
asd_abort_task(9)- ABORT TASK TMF✨
asd_ascb_alloc_list(9)- allocate a list of aSCBs✨
asd_ascb_free(9)- free a single aSCB after is has completed✨
asd_ascb_timedout(9)- called when a pending SCB's timer has expired✨
asd_build_control_phy(9)- build a CONTROL PHY SCB✨
asd_chip_hardrst(9)- hard reset the chip✨
asd_chip_reset(9)- reset the host adapter, etc✨
asd_com_sas_isr(9)- process device communication interrupt (COMINT)✨
asd_control_led(9)- enable/disable an LED on the board✨
asd_dch_sas_isr(9)- process device channel interrupt (DEVINT)✨
asd_ddbsite_update_word(9)- atomically update a word in a ddb site✨
asd_dump_seq_state(9)- dump CSEQ and LSEQ states✨
asd_erase_nv_sector(9)Erase the flash memory sectors.✨
asd_find_flash_dir(9)finds and reads the flash directory✨
asd_find_ll_by_id(9)find a linked list entry by its id✨
asd_get_attached_sas_addr(9)- extract/generate attached SAS address✨
asd_hst_pcix_isr(9)- process host interface interrupts✨
asd_hw_isr(9)- host adapter interrupt service routine✨
asd_init_chip(9)- initialize the chip✨
asd_init_cseq_cio(9)initialize CSEQ CIO registers✨
asd_init_cseq_mdp(9)initialize CSEQ Mode dependent pages✨
asd_init_cseq_mip(9)initialize CSEQ mode independent pages 4-7✨
asd_init_cseq_scratch(9)- setup and init CSEQ✨
asd_init_ctxmem(9)- initialize context memory✨
asd_init_ddb_0(9)- initialize DDB 0✨
asd_init_escbs(9)- allocate and initialize empty scbs✨
asd_init_lseq_cio(9)- initialize LmSEQ CIO registers✨
asd_init_lseq_mdp(9)- initialize LSEQ mode dependent pages.✨
asd_init_lseq_mip(9)- initialize LSEQ Mode independent pages 0-3✨
asd_init_lseq_scratch(9)- setup and init link sequencers✨
asd_init_sata_pm_ddb(9)- SATA Port Multiplier✨
asd_init_sata_pm_port_ddb(9)- SATA Port Multiplier Port✨
asd_init_scb_sites(9)- initialize sequencer SCB sites (memory).✨
asd_init_scbs(9)manually allocate the first SCB.✨
asd_initiate_ssp_tmf(9)- send a TMF to an I_T_L or I_T_L_Q nexus✨
asd_invalidate_edb(9)- invalidate an EDB and if necessary post the ESCB✨
asd_move_swb(9)- move sliding window B✨
asd_ms_get_phy_params(9)get phy parameters from the manufacturing sector✨
asd_pause_cseq(9)pause the central sequencer✨
asd_pause_lseq(9)pause the link sequencer(s)✨
asd_post_ascb_list(9)- post a list of 1 or more aSCBs to the host adapter✨
asd_post_escb_list(9)- post a list of 1 or more empty scb✨
asd_post_init_cseq(9)- clear CSEQ Mode n Int. status and Response mailbox✨
asd_process_ctrl_a_user(9)process CTRL-A user settings✨
asd_process_donelist_isr(9)- schedule processing of done list entries✨
asd_process_ms(9)find and extract information from the manufacturing sector✨
asd_query_task(9)- send a QUERY TASK TMF to an I_T_L_Q nexus✨
asd_rbi_exsi_isr(9)- process external system interface interrupt (INITERR)✨
asd_read_flash(9)read flash memory✨
asd_read_ocm(9)read on chip memory (OCM)✨
asd_read_ocm_seg(9)read an on chip memory (OCM) segment✨
asd_read_reg_string(9)- read a string of bytes from io space memory✨
asd_seq_download_seqs(9)download the sequencer microcode✨
asd_seq_pause_lseq(9)pause a link sequencer✨
asd_seq_setup_seqs(9)- setup and initialize central and link sequencers✨
asd_seq_start_cseq(9)- start the central sequencer, CSEQ✨
asd_seq_start_lseq(9)- start a link sequencer✨
asd_seq_unpause_lseq(9)unpause a link sequencer✨
asd_start_scb_timers(9)- (add and) start timers of SCBs✨
asd_swap_head_scb(9)- swap the head scb✨
asd_turn_led(9)- turn on/off an LED✨
asd_unpause_cseq(9)unpause the central sequencer.✨
asd_update_port_links(9)- update port_map_by_links and phy_is_up✨
asd_verify_flash_seg(9)verify data with flash memory✨
asd_verify_lseq(9)verify the microcode of a link sequencer✨
asd_verify_seq(9)- verify CSEQ/LSEQ microcode✨
asd_write_flash_seg(9)write data into flash memory✨
asd_write_ocm_seg(9)write an on chip memory (OCM) segment✨
asd_write_reg_string(9)- write a string of bytes to io space memory✨
asix_soft_reset(9)software reset the PHY via BMCR_RESET bit✨
asn1_ber_decoder(9)Decoder BER/DER/CER ASN.1 according to pattern✨
asn1_encode_boolean(9)encode a boolean value to ASN.1✨
asn1_encode_integer(9)encode positive integer to ASN.1✨
asn1_encode_length(9)encode a length to follow an ASN.1 tag✨
asn1_encode_octet_string(9)encode an ASN.1 OCTET STRING✨
asn1_encode_oid(9)encode an oid to ASN.1✨
asn1_encode_sequence(9)wrap a byte stream in an ASN.1 SEQUENCE✨
asn1_encode_tag(9)add a tag for optional or explicit value✨
ASPEED GFX Driver(9)✨
aspeed_disable_sig(9)Disable a signal on a pin by disabling all provided signal expressions.✨
aspeed_find_expr_by_name(9)Search for the signal expression needed to enable the pin's signal for the requested function.✨
aspeed_g5_sig_expr_set(9)Configure a pin's signal by applying an expression's descriptor state for all descriptors in the expression.✨
aspeed_g6_sig_expr_set(9)Configure a pin's signal by applying an expression's descriptor state for all descriptors in the expression.✨
aspeed_gpio_copro_grab_gpio(9)Mark a GPIO used by the coprocessor. The entire bank gets marked and any access from the ARM will result in handshaking via callbacks.✨
aspeed_gpio_copro_release_gpio(9)Unmark a GPIO used by the coprocessor.✨
aspeed_gpio_copro_set_ops(9)Sets the callbacks used for handshaking with the coprocessor for shared GPIO banks✨
aspeed_intc0_resolve_route(9)Determine the necessary interrupt output at intc1✨
aspeed_intc_populate_ranges(9)✨
aspeed_sig_desc_eval(9)Query the enabled or disabled state of a signal descriptor.✨
aspeed_sig_expr_eval(9)Query the enabled or disabled state for a mux function's signal on a pin✨
aspm (int)(9)✨
asrc_read_last_fifo(9)read all the remaining data from FIFO✨
ASSERT_EQ(9)✨
ASSERT_EXCLUSIVE_ACCESS(9)assert no concurrent accesses to @var✨
ASSERT_EXCLUSIVE_ACCESS_SCOPED(9)assert no concurrent accesses to @var in scope✨
ASSERT_EXCLUSIVE_BITS(9)assert no concurrent writes to subset of bits in @var✨
ASSERT_EXCLUSIVE_WRITER(9)assert no concurrent writes to @var✨
ASSERT_EXCLUSIVE_WRITER_SCOPED(9)assert no concurrent writes to @var in scope✨
ASSERT_FALSE(9)✨
ASSERT_GE(9)✨
ASSERT_GT(9)✨
assert_hash_lock_agent(9)Assert that a data_vio is the agent of its hash lock, and that this is being called in the hash zone.✨
assert_in_bio_zone(9)Assert that a vio is in the correct bio zone and not in interrupt context.✨
ASSERT_LE(9)✨
ASSERT_LT(9)✨
ASSERT_MEM_EQ(9)Check that the first @_size bytes of @_seen are all equal to @_expected. If false, print failed test message (if running with --verbose) and then assert.✨
ASSERT_MEM_NE(9)Check that none of the first @_size bytes of @_seen are equal to @_expected. If false, print failed test message (if running with --verbose) and then assert.✨
ASSERT_NE(9)✨
ASSERT_NULL(9)✨
assert_on_cache_thread(9)Assert that a function has been called on the VDO page cache's thread.✨
assert_on_flusher_thread(9)Check that we are on the flusher thread.✨
assert_on_journal_thread(9)Assert that we are running on the journal thread.✨
assert_on_packer_thread(9)Check that we are on the packer thread.✨
ASSERT_STREQ(9)✨
ASSERT_STRNE(9)✨
ASSERT_TRUE(9)✨
assert_vdo_drain_operation(9)Check that an operation is a drain.✨
assert_vdo_resume_operation(9)Check whether an admin_state_code is a resume operation.✨
assert_vio_in_bio_zone(9)Check that a vio is running on the correct thread for its bio zone.✨
assign_adapter_store(9)parses the APID from @buf and sets the corresponding bit in the mediated matrix device's APM✨
assign_aeb_to_av(9)assigns a SEB to a given ainf_volume and removes it from it's original list.✨
assign_bit(9)Assign value to a bit in memory✨
assign_control_domain_store(9)parses the domain ID from @buf and sets the corresponding bit in the mediated matrix device's ADM✨
assign_domain_store(9)parses the APQI from @buf and sets the corresponding bit in the mediated matrix device's AQM✨
assign_entry(9)Assign an entry waiter to the active block.✨
assign_requested_resources_sorted(9)Satisfy resource requests✨
assign_work(9)assign a work item and its linked work items to a worker✨
assoc_array_apply_edit(9)Apply an edit script to an associative array✨
assoc_array_cancel_edit(9)Discard an edit script.✨
assoc_array_clear(9)Script deletion of all objects from an associative array✨
assoc_array_delete(9)Script deletion of an object from an associative array✨
assoc_array_destroy(9)Destroy an associative array✨
assoc_array_find(9)Find an object by index key✨
assoc_array_gc(9)Garbage collect an associative array.✨
assoc_array_insert(9)Script insertion of an object into an associative array✨
assoc_array_insert_set_object(9)Set the new object pointer in an edit script✨
assoc_array_iterate(9)Pass all objects in the array to a callback✨
asus_wmi_get_devstate_dsts(9)Get the WMI function state.✨
asus_wmi_set_devstate(9)Set the WMI function state.✨