📦 linux-manual

82568 pages · page 42 of 413

C (continued)

ccw_device_get_schid(9)obtain a subchannel id✨
ccw_device_get_util_str(9)return newly allocated utility strings✨
ccw_device_halt(9)halt I/O request processing✨
ccw_device_is_multipath(9)determine if device is operating in multipath mode✨
ccw_device_is_pathgroup(9)determine if paths to this device are grouped✨
ccw_device_notify(9)inform the device's driver about an event✨
ccw_device_pnso(9)Perform Network-Subchannel Operation✨
ccw_device_resume(9)resume channel program execution✨
ccw_device_sched_todo(9)schedule ccw device operation✨
ccw_device_sense_id_start(9)perform SENSE ID✨
ccw_device_set_offline(9)disable a ccw device for I/O✨
ccw_device_set_online(9)enable a ccw device for I/O✨
ccw_device_set_options(9)set some options✨
ccw_device_set_options_mask(9)set some options and unset the rest✨
ccw_device_siosl(9)initiate logging✨
ccw_device_start(9)start a s390 channel program✨
ccw_device_start_key(9)start a s390 channel program with key✨
ccw_device_start_timeout(9)start a s390 channel program with timeout✨
ccw_device_start_timeout_key(9)start a s390 channel program with timeout and key✨
ccw_device_stlck_start(9)perform unconditional release✨
ccw_device_tm_intrg(9)perform interrogate function✨
ccw_device_tm_start(9)perform start function✨
ccw_device_tm_start_key(9)perform start function✨
ccw_device_tm_start_timeout(9)perform start function✨
ccw_device_tm_start_timeout_key(9)perform start function✨
ccw_device_verify_start(9)perform path verification✨
ccw_device_wait_idle(9)busy wait for device to become idle✨
ccw_driver_register(9)register a ccw driver✨
ccw_driver_unregister(9)deregister a ccw driver✨
ccw_purge_blacklisted(9)purge unused, blacklisted devices✨
ccw_request_cancel(9)cancel running I/O request✨
ccw_request_handler(9)interrupt handler for I/O request procedure.✨
ccw_request_notoper(9)notoper handler for I/O request procedure✨
ccw_request_start(9)perform I/O request✨
ccw_request_timeout(9)timeout handler for I/O request procedure✨
ccwchain_calc_length(9)calculate the length of the ccw chain.✨
ccwgroup_create_dev(9)create and register a ccw group device✨
ccwgroup_driver_register(9)register a ccw group driver✨
ccwgroup_driver_unregister(9)deregister a ccw group driver✨
ccwgroup_probe_ccwdev(9)probe function for slave devices✨
ccwgroup_remove_ccwdev(9)remove function for slave devices✨
ccwgroup_set_offline(9)disable a ccwgroup device✨
ccwgroup_set_online(9)enable a ccwgroup device✨
cdc_parse_cdc_header(9)parse the extra headers present in CDC devices✨
CDCLK RAWCLK(9)✨
cdev_add(9)add a char device to the system✨
cdev_alloc(9)allocate a cdev structure✨
cdev_del(9)remove a cdev from the system✨
cdev_device_add(9)add a char device and it's corresponding struct device, linkink✨
cdev_device_del(9)inverse of cdev_device_add✨
cdev_init(9)initialize a cdev structure✨
cdev_set_parent(9)set the parent kobject for a char device✨
cdns3_allocate_trb_pool(9)Allocates TRB's pool for selected endpoint✨
cdns3_allow_enable_l1(9)enable/disable permits to transition to L1.✨
cdns3_check_ep0_interrupt_proceed(9)Processes interrupt related to endpoint 0✨
cdns3_check_ep_interrupt_proceed(9)Processes interrupt related to endpoint✨
cdns3_check_new_setup(9)Check if controller receive new SETUP packet.✨
cdns3_check_usb_interrupt_proceed(9)Processes interrupt related to device✨
cdns3_clear_register_bit(9)clear bit in given register.✨
cdns3_device_irq_handler(9)interrupt handler for device part of controller✨
cdns3_device_thread_irq_handler(9)interrupt handler for device part of controller✨
cdns3_ep0_config(9)Configures default endpoint✨
cdns3_ep0_delegate_req(9)Returns status of handling setup packet Setup is handled by gadget driver✨
cdns3_ep0_run_transfer(9)Do transfer on default endpoint hardware✨
cdns3_ep0_setup_phase(9)Handling setup USB requests✨
cdns3_ep0_standard_request(9)Handling standard USB requests✨
cdns3_ep_addr_to_index(9)Macro converts endpoint address to index of endpoint object in cdns3_device.eps[] container✨
cdns3_ep_config(9)Configure hardware endpoint✨
cdns3_ep_inc_deq(9)increment endpoint's dequeue pointer✨
cdns3_ep_inc_enq(9)increment endpoint's enqueue pointer✨
cdns3_ep_inc_trb(9)increment a trb index.✨
cdns3_ep_onchip_buffer_reserve(9)Try to reserve onchip buf for EP✨
cdns3_ep_run_transfer(9)start transfer on no-default endpoint hardware✨
cdns3_ep_stall_flush(9)Stalls and flushes selected endpoint✨
cdns3_gadget_check_config(9)ensure cdns3 can support the USB configuration✨
cdns3_gadget_ep0_disable(9)✨
cdns3_gadget_ep0_enable(9)✨
cdns3_gadget_ep0_queue(9)Transfer data on endpoint zero✨
cdns3_gadget_ep0_set_halt(9)✨
cdns3_gadget_ep_alloc_request(9)Allocates request✨
cdns3_gadget_ep_dequeue(9)Remove request from transfer queue✨
cdns3_gadget_ep_disable(9)Disable endpoint✨
cdns3_gadget_ep_enable(9)Enable endpoint✨
cdns3_gadget_ep_free_request(9)Free memory occupied by request✨
cdns3_gadget_ep_set_halt(9)Sets/clears stall on selected endpoint✨
cdns3_gadget_ep_set_wedge(9)Set wedge on selected endpoint✨
cdns3_gadget_get_frame(9)Returns number of actual ITP frame✨
cdns3_gadget_giveback(9)call struct usb_request's ->complete callback✨
cdns3_gadget_init(9)initialize device structure✨
cdns3_gadget_udc_start(9)Gadget start✨
cdns3_gadget_udc_stop(9)Stops gadget✨
cdns3_get_tdl(9)gets current tdl for selected endpoint.✨
cdns3_hw_reset_eps_config(9)reset endpoints configuration kept by controller.✨
cdns3_init_ep0(9)Initializes software endpoint 0 of gadget✨
cdns3_init_eps(9)Initializes software endpoints of gadget✨
cdns3_next_align_buf(9)returns next buffer from list✨
cdns3_next_priv_request(9)returns next request from list✨
cdns3_next_request(9)returns next request from list✨
cdns3_plat_probe(9)probe for cdns3 core device✨
cdns3_plat_remove(9)unbind drd driver and clean up✨
cdns3_req_ep0_get_status(9)Handling of GET_STATUS standard USB request✨
cdns3_req_ep0_handle_feature(9)Handling of GET/SET_FEATURE standard USB request✨
cdns3_req_ep0_set_address(9)Handling of SET_ADDRESS standard USB request✨
cdns3_req_ep0_set_configuration(9)Handling of SET_CONFIG standard USB request✨
cdns3_req_ep0_set_isoch_delay(9)Handling of GET_ISOCH_DELAY standard USB request✨
cdns3_req_ep0_set_sel(9)Handling of SET_SEL standard USB request✨
cdns3_select_ep(9)selects endpoint✨
cdns3_set_register_bit(9)set bit in given register.✨
cdns3_start_all_request(9)add to ring all request not started✨
cdns3_trb_handled(9)check whether trb has been handled by DMA✨
cdns3_wa2_descmiss_copy_data(9)copy data from internal requests to request queued by class driver.✨
cdns3_wa2_descmissing_packet(9)handles descriptor missing event.✨
cdns_calc_after_tx_delay(9)calculate delay required for after tx.✨
cdns_core_init_role(9)initialize role of operation✨
cdns_csi2rx_negotiate_ppc(9)Negotiate pixel-per-clock on output interface✨
cdns_drd_gadget_off(9)stop gadget.✨
cdns_drd_gadget_on(9)start gadget.✨
cdns_drd_host_off(9)stop host.✨
cdns_drd_host_on(9)start host.✨
cdns_drd_irq(9)interrupt handler for OTG events✨
cdns_drd_update_mode(9)initialize mode of operation✨
cdns_enable_slave_interrupts(9)Enable SDW slave interrupts✨
cdns_find_pdi(9)Find a free PDI✨
cdns_hw_role_state_machine(9)role switch state machine based on hw events.✨
cdns_hw_role_switch(9)switch roles based on HW state✨
cdns_i2c_calc_divs(9)Calculate clock dividers✨
cdns_i2c_clear_bus_hold(9)Clear bus hold bit✨
cdns_i2c_clk_notifier_cb(9)Clock rate change callback✨
cdns_i2c_detect_transfer_size(9)Detect the maximum transfer size supported✨
cdns_i2c_func(9)Returns the supported features of the I2C driver✨
cdns_i2c_init(9)Controller initialisation✨
cdns_i2c_isr(9)Interrupt handler for the I2C device✨
cdns_i2c_master_isr(9)Interrupt handler for the I2C device in master role✨
cdns_i2c_master_reset(9)Reset the interface✨
cdns_i2c_master_xfer(9)The main i2c transfer function✨
cdns_i2c_master_xfer_atomic(9)The i2c transfer function in atomic mode✨
cdns_i2c_mrecv(9)Prepare and start a master receive operation✨
cdns_i2c_msend(9)Prepare and start a master send operation✨
cdns_i2c_probe(9)Platform registration call✨
cdns_i2c_remove(9)Unregister the device after releasing the resources✨
cdns_i2c_runtime_resume(9)Runtime resume✨
cdns_i2c_runtime_suspend(9)Runtime suspend method for the driver✨
cdns_i2c_setclk(9)This function sets the serial clock rate for the I2C device✨
cdns_i2c_shutdown(9)Prepare I2C controller for system shutdown✨
cdns_i2c_slave_isr(9)Interrupt handler for the I2C device in slave role✨
cdns_init(9)probe for cdns3/cdnsp core device✨
cdns_init_otg_mode(9)initialize drd controller✨
cdns_mhdp_link_configure(9)configure a DisplayPort link✨
cdns_otg_disable_irq(9)Disable all OTG interrupts✨
cdns_otg_enable_irq(9)enable id and sess_valid interrupts✨
cdns_prepare_transfer_hardware(9)Prepares hardware for transfer.✨
cdns_remove(9)unbind drd driver and clean up✨
cdns_role_get(9)get current role of controller.✨
cdns_role_set(9)set current role of controller.✨
cdns_rs485_config(9)Called when an application calls TIOCSRS485 ioctl.✨
cdns_rs485_rx_callback(9)Timer rx callback handler for rs485.✨
cdns_rs485_rx_setup(9)Rx setup specific to rs485✨
cdns_rs485_tx_callback(9)Timer tx callback handler for rs485.✨
cdns_rs485_tx_setup(9)Tx setup specific to rs485✨
cdns_rts_gpio_enable(9)Configure RTS/GPIO to high/low✨
cdns_set_mode(9)change mode of OTG Core✨
cdns_spi_chipselect(9)Select or deselect the chip select line✨
cdns_spi_config_clock_freq(9)Sets clock frequency✨
cdns_spi_config_clock_mode(9)Sets clock polarity and phase✨
cdns_spi_detect_fifo_depth(9)Detect the FIFO depth of the hardware✨
cdns_spi_init_hw(9)Initialize the hardware and configure the SPI controller✨
cdns_spi_irq(9)Interrupt service routine of the SPI controller✨
cdns_spi_probe(9)Probe method for the SPI driver✨
cdns_spi_process_fifo(9)Fills the TX FIFO, and drain the RX FIFO✨
cdns_spi_remove(9)Remove method for the SPI driver✨
cdns_spi_resume(9)Resume method for the SPI driver✨
cdns_spi_runtime_resume(9)Runtime resume method for the SPI driver✨
cdns_spi_runtime_suspend(9)Runtime suspend method for the SPI driver✨
cdns_spi_setup_transfer(9)Configure SPI controller for specified transfer✨
cdns_spi_suspend(9)Suspend method for the SPI driver✨
cdns_target_abort(9)Abort target transfer✨
cdns_transfer_one(9)Initiates the SPI transfer✨
cdns_uart_break_ctl(9)Based on the input ctl we have to start or stop transmitting char breaks✨
cdns_uart_calc_baud_divs(9)Calculate baud rate divisors✨
cdns_uart_clk_notifier_cb(9)Clock notifier callback✨
cdns_uart_config_port(9)Configure UART port✨
cdns_uart_console_putchar(9)write the character to the FIFO buffer✨
cdns_uart_console_setup(9)Initialize the uart to default config✨
cdns_uart_console_write(9)perform write operation✨
cdns_uart_get_mctrl(9)Get the modem control state✨
cdns_uart_handle_rx(9)Handle the received bytes along with Rx errors.✨
cdns_uart_handle_tx(9)Handle the bytes to be transmitted.✨
cdns_uart_isr(9)Interrupt handler✨
cdns_uart_probe(9)Platform driver probe✨
cdns_uart_release_port(9)Release UART port✨
cdns_uart_remove(9)called when the platform driver is unregistered✨
cdns_uart_request_port(9)Claim the memory region attached to cdns_uart port, called when the driver adds a cdns_uart port via uart_add_one_port()✨
cdns_uart_resume(9)Resume after a previous suspend✨
cdns_uart_set_baud_rate(9)Calculate and set the baud rate✨
cdns_uart_set_termios(9)termios operations, handling data length, parity, stop bits, flow control, baud rate✨
cdns_uart_shutdown(9)Called when an application closes a cdns_uart port✨
cdns_uart_start_tx(9)Start transmitting bytes✨
cdns_uart_startup(9)Called when an application opens a cdns_uart port✨
cdns_uart_stop_rx(9)Stop RX✨
cdns_uart_stop_tx(9)Stop TX✨