📦 linux-manual

C (continued)

• cdns_uart_suspend(9)suspend event✨
• cdns_uart_tx_empty(9)Check whether TX is empty✨
• cdns_uart_type(9)Set UART type to cdns_uart port✨
• cdns_uart_verify_port(9)Verify the port params✨
• cdns_ufs_get_l4_attr(9)get L4 attributes on local side✨
• cdns_ufs_hce_enable_notify(9)set HCLKDIV register✨
• cdns_ufs_hibern8_notify(9)save and restore L4 attributes.✨
• cdns_ufs_init(9)performs additional ufs initialization✨
• cdns_ufs_link_startup_notify(9)handle link startup.✨
• cdns_ufs_m31_16nm_phy_initialization(9)performs m31 phy initialization✨
• cdns_ufs_pltfrm_probe(9)probe routine of the driver✨
• cdns_ufs_pltfrm_remove(9)removes the ufs driver✨
• cdns_ufs_set_hclkdiv(9)set HCLKDIV register value based on the core_clk.✨
• cdns_ufs_set_l4_attr(9)set L4 attributes on local side✨
• cdns_unprepare_transfer_hardware(9)Relaxes hardware after transfer✨
• cdns_update_slave_status_work(9)update slave status in a work since we will need to handle other interrupts eg. CDNS_MCP_INT_RX_WL during the update slave process.✨
• cdns_wakeup_irq(9)interrupt handler for wakeup events✨
• cdns_wdt_irq_handler(9)Notifies of watchdog timeout.✨
• cdns_wdt_probe(9)Probe call for the device.✨
• cdns_wdt_reload(9)Reload the watchdog timer (i.e. pat the watchdog).✨
• cdns_wdt_resume(9)Resume the device.✨
• cdns_wdt_settimeout(9)Set a new timeout value for the watchdog device.✨
• cdns_wdt_start(9)Enable and start the watchdog.✨
• cdns_wdt_stop(9)Stop the watchdog.✨
• cdns_wdt_suspend(9)Stop the device.✨
• cdnsp_find_next_ext_cap(9)Find the offset of the extended capabilities with capability ID id.✨
• cdnsp_gadget_init(9)initialize device structure✨
• cdv_intel_lvds_init(9)setup LVDS connectors on this device✨
• cdv_restore_display_registers(9)restore lost register state✨
• cdv_save_display_registers(9)save registers lost on suspend✨
• cdx_bus_add(9)Add a CDX bus. This function adds a bus on the CDX bus subsystem. It creates a CDX device for the corresponding bus and also registers an associated Linux generic device.✨
• cdx_bus_match(9)device to driver matching callback✨
• cdx_clear_master(9)disables bus-mastering for CDX device✨
• cdx_dev_reset(9)Reset CDX device✨
• CDX_DEVICE(9)macro used to describe a specific CDX device✨
• cdx_device_add(9)Add a CDX device. This function adds a CDX device on the CDX bus as per the device parameters provided by caller. It also creates and registers an associated Linux generic device.✨
• CDX_DEVICE_DRIVER_OVERRIDE(9)macro used to describe a CDX device with override_only flags.✨
• cdx_disable_msi(9)Disable MSI for the CDX device.✨
• cdx_driver_unregister(9)unregisters a device driver from the CDX bus.✨
• cdx_enable_msi(9)Enable MSI for the CDX device.✨
• cdx_match_id(9)See if a CDX device matches a given cdx_id table✨
• cdx_match_one_device(9)Tell if a CDX device structure has a matching CDX device id structure✨
• cdx_mcdi_bus_disable(9)Disable CDX bus represented by bus_num✨
• cdx_mcdi_bus_enable(9)Enable CDX bus represented by bus_num✨
• cdx_mcdi_bus_master_enable(9)Set/Reset bus mastering for cdx device represented by bus_num:dev_num✨
• cdx_mcdi_finish(9)Cleanup MCDI (Management Controller Driver Interface) state✨
• cdx_mcdi_get_dev_config(9)Get configuration for a particular bus_num:dev_num✨
• cdx_mcdi_get_num_buses(9)Get the total number of buses on the controller.✨
• cdx_mcdi_get_num_devs(9)Get the total number of devices on a particular bus of the controller.✨
• cdx_mcdi_init(9)Initialize MCDI (Management Controller Driver Interface) state✨
• cdx_mcdi_msi_enable(9)Enable/Disable MSIs for cdx device represented by bus_num:dev_num✨
• cdx_mcdi_process_cmd(9)Process an incoming MCDI response✨
• cdx_mcdi_reset_device(9)Reset cdx device represented by bus_num:dev_num✨
• cdx_mcdi_rpc(9)Issue an MCDI command and wait for completion✨
• cdx_mcdi_rpc_async(9)Schedule an MCDI command to run asynchronously✨
• cdx_mcdi_write_msi(9)Write MSI configuration for CDX device✨
• cdx_mmap_resource(9)map a CDX resource into user memory space✨
• cdx_msi_domain_init(9)Init the CDX bus MSI domain.✨
• cdx_register_controller(9)Register a CDX controller and its ports on the CDX bus.✨
• cdx_set_master(9)enables bus-mastering for CDX device✨
• cdx_unregister_controller(9)Unregister a CDX controller✨
• cdx_unregister_device(9)Unregister a CDX device✨
• cec_add_elem(9)Add an element to the CEC array.✨
• cec_get_edid_phys_addr(9)find and return the physical address✨
• cec_get_edid_spa_location(9)find location of the Source Physical Address✨
• cec_is_registered(9)is the CEC adapter registered?✨
• cec_msg_destination(9)return the destination's logical address.✨
• cec_msg_init(9)initialize the message structure.✨
• cec_msg_initiator(9)return the initiator's logical address.✨
• cec_msg_is_broadcast(9)return true if this is a broadcast message.✨
• cec_msg_opcode(9)return the opcode of the message, -1 for poll✨
• cec_msg_recv_is_rx_result(9)return true if this message contains the reply of an earlier non-blocking transmit✨
• cec_msg_recv_is_tx_result(9)return true if this message contains the result of an earlier non-blocking transmit✨
• cec_msg_set_reply_to(9)fill in destination/initiator in a reply message.✨
• cec_notifier_cec_adap_register(9)find or create a new cec_notifier for the given device.✨
• cec_notifier_cec_adap_unregister(9)decrease refcount and delete when the refcount reaches 0.✨
• cec_notifier_conn_register(9)find or create a new cec_notifier for the given HDMI device and connector tuple.✨
• cec_notifier_conn_unregister(9)decrease refcount and delete when the refcount reaches 0.✨
• cec_notifier_get_conn(9)find or create a new cec_notifier for the given device and connector tuple.✨
• cec_notifier_parse_hdmi_phandle(9)find the hdmi device from "hdmi- phandle"✨
• cec_notifier_phys_addr_invalidate(9)set the physical address to INVALID✨
• cec_notifier_set_phys_addr(9)set a new physical address.✨
• cec_notifier_set_phys_addr_from_edid(9)set parse the PA from the EDID.✨
• cec_phys_addr_invalidate(9)set the physical address to INVALID✨
• cec_pin_allocate_adapter(9)allocate a pin-based cec adapter✨
• cec_pin_changed(9)update pin state from interrupt✨
• cec_queue_pin_5v_event(9)queue a pin event with a given timestamp.✨
• cec_queue_pin_cec_event(9)queue a CEC pin event with a given timestamp.✨
• cec_queue_pin_hpd_event(9)queue a pin event with a given timestamp.✨
• centaur_get_free_region(9)Get a free MTRR.✨
• centrino_init(9)initializes the Enhanced SpeedStep CPUFreq driver✨
• centrino_target(9)set a new CPUFreq policy✨
• ceph_change_snap_realm(9)change the snap_realm for an inode✨
• ceph_cls_break_lock(9)release rados lock for object for specified client✨
• ceph_cls_lock(9)grab rados lock for object✨
• ceph_cls_unlock(9)release rados lock for object✨
• ceph_encode_dentry_release(9)encode a dentry release into an outgoing request✨
• ceph_end_io_direct(9)declare that the direct i/o operation is done✨
• ceph_end_io_read(9)declare that the buffered read operation is done✨
• ceph_end_io_write(9)declare that the buffered write operation is done✨
• ceph_find_incompatible(9)find an incompatible context and return it✨
• ceph_fname_to_usr(9)convert a filename for userland presentation✨
• ceph_fscrypt_decrypt_extents(9)decrypt received extents in given buffer✨
• ceph_fscrypt_decrypt_pages(9)decrypt an array of pages✨
• ceph_fscrypt_encrypt_pages(9)encrypt an array of pages✨
• ceph_fscrypt_prepare_readdir(9)simple __fscrypt_prepare_readdir() wrapper✨
• ceph_get_inode(9)find or create/hash a new inode✨
• ceph_mdsc_build_path(9)build a path string to a given dentry✨
• ceph_mdsc_wait_for_reset(9)wait for an active reset to complete✨
• ceph_new_inode(9)allocate a new inode in advance of an expected create✨
• ceph_present_ino(9)format an inode number for presentation to userland✨
• ceph_show_options(9)Show mount options in /proc/mounts✨
• ceph_start_decoding(9)start decoding block✨
• ceph_start_encoding(9)start encoding block✨
• ceph_start_io_direct(9)declare the file is being used for direct i/o✨
• ceph_start_io_read(9)declare the file is being used for buffered reads✨
• ceph_start_io_write(9)declare the file is being used for buffered writes✨
• ceq_elements_init(9)Initialize all the elements in the ceq✨
• ceq_event_handler(9)handler for the ceq events✨
• ceq_interrupt(9)ceq interrupt handler✨
• ceq_irq_handler(9)handler for the CEQ event✨
• ceq_tasklet(9)the tasklet of the EQ that received the event✨
• cfg80211_6ghz_power_type(9)determine AP regulatory power type✨
• cfg80211_any_usable_channels(9)check for usable channels✨
• cfg80211_assoc_comeback(9)notification of association that was temporarily rejected with a comeback✨
• cfg80211_assoc_failure(9)notification of association failure✨
• cfg80211_auth_timeout(9)notification of timed out authentication✨
• cfg80211_background_cac_abort(9)Channel Availability Check offchan abort event✨
• cfg80211_bss_color_notify(9)notify about bss color event✨
• cfg80211_bss_flush(9)resets all the scan entries✨
• cfg80211_bss_iter(9)iterate all BSS entries✨
• cfg80211_cac_event(9)Channel availability check (CAC) event✨
• cfg80211_calculate_bitrate(9)calculate actual bitrate (in 100Kbps units)✨
• cfg80211_ch_switch_notify(9)update wdev channel and notify userspace✨
• cfg80211_ch_switch_started_notify(9)notify channel switch start✨
• cfg80211_chandef_add_dbe(9)parse and add DBE information to chandef✨
• cfg80211_chandef_add_npca(9)parse and add NPCA information to chandef✨
• cfg80211_chandef_compatible(9)check if two channel definitions are compatible✨
• cfg80211_chandef_create(9)create channel definition using channel type✨
• cfg80211_chandef_dfs_cac_time(9)get the DFS CAC time (in ms) for given channel definition✨
• cfg80211_chandef_dfs_required(9)checks if radar detection is required✨
• cfg80211_chandef_dfs_usable(9)checks if chandef is DFS usable and we can/need start CAC on such channel✨
• cfg80211_chandef_get_width(9)return chandef width in MHz✨
• cfg80211_chandef_identical(9)check if two channel definitions are identical✨
• cfg80211_chandef_is_edmg(9)check if chandef represents an EDMG channel✨
• cfg80211_chandef_is_s1g(9)check if chandef represents an S1G channel✨
• cfg80211_chandef_npca_valid(9)check that NPCA information is valid✨
• cfg80211_chandef_primary(9)calculate primary 40/80/160 MHz freq✨
• cfg80211_chandef_s1g_pri_width(9)return S1G primary width in MHz✨
• cfg80211_chandef_usable(9)check if secondary channels can be used✨
• cfg80211_chandef_valid(9)check if a channel definition is valid✨
• cfg80211_channel_is_psc(9)Check if the channel is a 6 GHz PSC✨
• cfg80211_check_combinations(9)check interface combinations✨
• cfg80211_check_station_change(9)validate parameter changes✨
• cfg80211_classify8021d(9)determine the 802.1p/1d tag for a data frame✨
• cfg80211_color_change_aborted_notify(9)notify color change abort✨
• cfg80211_color_change_notify(9)notify color change completion✨
• cfg80211_color_change_started_notify(9)notify color change start✨
• cfg80211_conn_failed(9)connection request failed notification✨
• cfg80211_connect_bss(9)notify cfg80211 of connection result✨
• cfg80211_connect_done(9)notify cfg80211 of connection result✨
• cfg80211_connect_result(9)notify cfg80211 of connection result✨
• cfg80211_connect_timeout(9)notify cfg80211 of connection timeout✨
• cfg80211_control_port_tx_status(9)notification of TX status for control port frames✨
• cfg80211_cqm_beacon_loss_notify(9)beacon loss event✨
• cfg80211_cqm_pktloss_notify(9)notify userspace about packetloss to peer✨
• cfg80211_cqm_rssi_notify(9)connection quality monitoring rssi event✨
• cfg80211_cqm_txe_notify(9)TX error rate event✨
• cfg80211_crit_proto_stopped(9)indicate critical protocol stopped by driver.✨
• cfg80211_defragment_element(9)Defrag the given element data into a buffer✨
• cfg80211_del_sta(9)notify userspace about deletion of a station✨
• cfg80211_del_sta_sinfo(9)notify userspace about deletion of a station✨
• cfg80211_disconnected(9)notify cfg80211 that connection was dropped✨
• cfg80211_epcs_changed(9)Notify about a change in EPCS state✨
• cfg80211_external_auth_request(9)userspace request for authentication✨
• cfg80211_find_elem(9)find information element in data✨
• cfg80211_find_elem_match(9)match information element and byte array in data✨
• cfg80211_find_ext_elem(9)find information element with EID Extension in data✨
• cfg80211_find_ext_ie(9)find information element with EID Extension in data✨
• cfg80211_find_ie(9)find information element in data✨
• cfg80211_find_ie_match(9)match information element and byte array in data✨
• cfg80211_find_vendor_elem(9)find vendor specific information element in data✨
• cfg80211_find_vendor_ie(9)find vendor specific information element in data✨
• cfg80211_free_nan_func(9)free NAN function✨
• cfg80211_ft_event(9)notify userspace about FT IE and RIC IE✨
• cfg80211_gen_new_bssid(9)generate a nontransmitted BSSID for multi-BSSID✨
• cfg80211_get_bss(9)get a BSS reference✨
• cfg80211_get_chandef_type(9)return old channel type from chandef✨
• cfg80211_get_ies_channel_number(9)returns the channel number from ies✨
• cfg80211_get_iftype_ext_capa(9)lookup interface type extended capability✨
• cfg80211_get_p2p_attr(9)find and copy a P2P attribute from IE buffer✨
• cfg80211_get_radio_idx_by_chan(9)get the radio index by the channel✨
• cfg80211_get_station(9)retrieve information about a given station✨
• cfg80211_get_unii(9)get the U-NII band for the frequency✨
• cfg80211_gtk_rekey_notify(9)notify userspace about driver rekeying✨
• cfg80211_ibss_joined(9)notify cfg80211 that device joined an IBSS✨
• cfg80211_iftype_allowed(9)check whether the interface can be allowed✨
• cfg80211_incumbent_signal_notify(9)Notify userspace of incumbent signal detection✨
• cfg80211_inform_bss_data(9)inform cfg80211 of a new BSS✨
• cfg80211_inform_bss_frame_data(9)inform cfg80211 of a received BSS frame✨