📦 linux-manual

82568 pages · page 411 of 413

Z (continued)

zl3073x_chan_is_ho_ready(9)check if holdover is ready✨
zl3073x_chan_is_locked(9)check if channel is locked to a reference✨
zl3073x_chan_lock_state_get(9)get DPLL channel lock state✨
zl3073x_chan_mode_get(9)get DPLL channel operating mode✨
zl3073x_chan_mode_is_auto(9)check if channel is in automatic mode✨
zl3073x_chan_mode_is_nco(9)check if channel is in NCO mode✨
zl3073x_chan_mode_is_reflock(9)check if channel is in reflock mode✨
zl3073x_chan_mode_set(9)set DPLL channel operating mode✨
zl3073x_chan_mode_supports_tie(9)check if channel mode supports TIE write✨
zl3073x_chan_nco_mode_set(9)switch DPLL channel to NCO mode✨
zl3073x_chan_phase_step(9)execute one output phase step operation✨
zl3073x_chan_ref_get(9)get manually selected reference✨
zl3073x_chan_ref_is_selectable(9)check if reference is selectable✨
zl3073x_chan_ref_prio_get(9)get reference priority✨
zl3073x_chan_ref_prio_set(9)set reference priority✨
zl3073x_chan_ref_set(9)set manually selected reference✨
zl3073x_chan_refsel_ref_get(9)get currently selected reference in auto mode✨
zl3073x_chan_refsel_state_get(9)get reference selection state✨
zl3073x_chan_state_fetch(9)fetch DPLL channel state from hardware✨
zl3073x_chan_state_get(9)get current DPLL channel state✨
zl3073x_chan_state_set(9)commit DPLL channel state changes to hardware✨
zl3073x_chan_state_update(9)update DPLL channel status from HW✨
zl3073x_chan_tie_write(9)adjust DPLL phase using TIE write✨
zl3073x_chan_tod_adjust(9)atomic ToD read-modify-write with rollover guard✨
zl3073x_chan_tod_ctrl(9)issue ToD command✨
zl3073x_chan_tod_read(9)read ToD registers after issuing a command✨
zl3073x_chan_tod_ready_wait(9)wait for ToD semaphore to clear✨
zl3073x_chan_tod_write(9)write ToD registers and trigger 1 Hz update✨
zl3073x_dev_is_ref_phase_comp_32bit(9)check ref phase comp register size✨
zl3073x_dev_out_dpll_get(9)get DPLL ID the output is driven by✨
zl3073x_dev_out_is_diff(9)check if the given output is differential✨
zl3073x_dev_out_is_enabled(9)check if the given output is enabled✨
zl3073x_dev_out_is_stepped(9)check if output is in step-time mask✨
zl3073x_dev_out_synth_get(9)get synth connected to given output✨
zl3073x_dev_output_pin_freq_get(9)get output pin frequency✨
zl3073x_dev_output_pin_is_enabled(9)check if the given output pin is enabled✨
zl3073x_dev_phase_meas_setup(9)setup phase offset measurement✨
zl3073x_dev_probe(9)initialize zl3073x device✨
zl3073x_dev_ref_freq_get(9)get input reference frequency✨
zl3073x_dev_ref_is_diff(9)check if the given input reference is differential✨
zl3073x_dev_start(9)Start normal operation✨
zl3073x_dev_stop(9)Stop normal operation✨
zl3073x_dev_synth_freq_get(9)get synth current freq✨
zl3073x_devlink_flash_finish(9)Leave flash mode and resume normal operation✨
zl3073x_devlink_flash_prepare(9)Prepare and enter flash mode✨
zl3073x_devlink_flash_update(9)Devlink flash update callback✨
zl3073x_devlink_info_get(9)Devlink device info callback✨
zl3073x_devlink_register(9)register devlink instance and params✨
zl3073x_devm_alloc(9)allocates zl3073x device structure✨
zl3073x_do_hwreg_op(9)Perform HW register read/write operation✨
zl3073x_dpll_alloc(9)allocate DPLL device✨
zl3073x_dpll_changes_check(9)check for changes and send notifications✨
zl3073x_dpll_connected_ref_get(9)get currently connected reference✨
zl3073x_dpll_device_register(9)register DPLL device✨
zl3073x_dpll_device_unregister(9)unregister DPLL device✨
zl3073x_dpll_free(9)free DPLL device✨
zl3073x_dpll_init_fine_phase_adjust(9)do initial fine phase adjustments✨
zl3073x_dpll_is_input_pin(9)check if the pin is input one✨
zl3073x_dpll_is_nco_pin(9)check if the pin is a virtual NCO pin✨
zl3073x_dpll_is_p_pin(9)check if the pin is P-pin✨
zl3073x_dpll_pin_alloc(9)allocate DPLL pin✨
zl3073x_dpll_pin_ffo_check(9)check for FFO change on active pin✨
zl3073x_dpll_pin_free(9)deallocate DPLL pin✨
zl3073x_dpll_pin_is_registrable(9)check if the pin is registrable✨
zl3073x_dpll_pin_measured_freq_check(9)check for pin measured frequency change✨
zl3073x_dpll_pin_phase_offset_check(9)check for pin phase offset change✨
zl3073x_dpll_pin_register(9)register DPLL pin✨
zl3073x_dpll_pin_unregister(9)unregister DPLL pin✨
zl3073x_dpll_pins_register(9)register all registerable DPLL pins✨
zl3073x_dpll_pins_unregister(9)unregister all registered DPLL pins✨
zl3073x_dpll_ptp_adjfine(9)adjust PTP clock frequency✨
zl3073x_dpll_ptp_adjphase(9)adjust PTP clock phase✨
zl3073x_dpll_ptp_adjtime(9)adjust PTP clock time✨
zl3073x_dpll_ptp_adjtime_phase_step(9)adjust sub-second time via phase step✨
zl3073x_dpll_ptp_gettimex64(9)read current time from ToD counters✨
zl3073x_dpll_ptp_register(9)register PTP clock for a DPLL channel✨
zl3073x_dpll_ptp_settime64(9)set ToD counters to given time✨
zl3073x_dpll_ptp_unregister(9)unregister PTP clock for a DPLL channel✨
zl3073x_dpll_ref_operstate_get(9)get operational state for input pin✨
zl3073x_dpll_ref_sync_pair_register(9)register ref_sync pairs for a pin✨
zl3073x_dpll_ref_sync_pairs_register(9)register ref_sync pairs for a DPLL✨
zl3073x_dpll_register(9)register DPLL device and all its pins✨
zl3073x_dpll_unregister(9)unregister DPLL device and its pins✨
zl3073x_flash_block(9)Download and flash memory block✨
zl3073x_flash_cmd_wait(9)Perform flash operation and wait for finish✨
zl3073x_flash_download(9)Download image block to device memory✨
zl3073x_flash_error_check(9)Check for flash utility errors✨
zl3073x_flash_get_sector_size(9)Get flash sector size✨
zl3073x_flash_mode_enter(9)Switch the device to flash mode✨
zl3073x_flash_mode_leave(9)Leave flash mode✨
zl3073x_flash_mode_verify(9)Check flash utility✨
zl3073x_flash_page(9)Flash page✨
zl3073x_flash_page_copy(9)Copy flash page✨
zl3073x_flash_sectors(9)Flash sectors✨
zl3073x_flash_wait_ready(9)Check or wait for utility to be ready to flash✨
zl3073x_fw_component_alloc(9)Alloc structure to hold firmware component✨
zl3073x_fw_component_flash(9)Flash all components✨
zl3073x_fw_component_free(9)Free allocated component structure✨
zl3073x_fw_component_id_get(9)Get ID for firmware component name✨
zl3073x_fw_component_load(9)Load component from firmware source✨
zl3073x_fw_free(9)Free allocated firmware✨
zl3073x_fw_load(9)Load all components from source✨
zl3073x_input_pin_ref_get(9)get reference for given input pin✨
zl3073x_out_clock_type_get(9)get output clock type✨
zl3073x_out_clock_type_set(9)set output clock type✨
zl3073x_out_is_diff(9)check if the given output is differential✨
zl3073x_out_is_enabled(9)check if the given output is enabled✨
zl3073x_out_is_ndiv(9)check if the given output is in N-div mode✨
zl3073x_out_signal_format_get(9)get output signal format✨
zl3073x_out_state_fetch(9)fetch output state from hardware✨
zl3073x_out_state_get(9)get current output state✨
zl3073x_out_state_set(9)commit output state changes to hardware✨
zl3073x_out_synth_get(9)get synth connected to given output✨
zl3073x_output_pin_out_get(9)get output for the given output pin✨
zl3073x_pin_check_freq(9)verify frequency for given pin✨
zl3073x_pin_props_get(9)get pin properties✨
zl3073x_pin_props_put(9)release pin properties✨
zl3073x_poll_zero_u8(9)wait for register to be cleared by device✨
zl3073x_prop_dpll_type_get(9)get DPLL channel type✨
zl3073x_prop_pin_fwnode_get(9)get fwnode for given pin✨
zl3073x_prop_pin_package_label_set(9)get package label for the pin✨
zl3073x_read_hwreg(9)Read HW register✨
zl3073x_read_u16(9)read value from 16bit register✨
zl3073x_read_u32(9)read value from 32bit register✨
zl3073x_read_u48(9)read value from 48bit register✨
zl3073x_read_u8(9)read value from 8bit register✨
zl3073x_ref_freq_factorize(9)factorize given frequency✨
zl3073x_ref_freq_get(9)get given input reference frequency✨
zl3073x_ref_freq_meas_latch(9)latch reference frequency measurements✨
zl3073x_ref_freq_meas_update(9)update measured input reference frequencies✨
zl3073x_ref_freq_set(9)set given input reference frequency✨
zl3073x_ref_is_diff(9)check if the given input reference is differential✨
zl3073x_ref_is_enabled(9)check if the given input reference is enabled✨
zl3073x_ref_is_status_ok(9)check the given input reference status✨
zl3073x_ref_meas_freq_get(9)get measured input frequency✨
zl3073x_ref_phase_offsets_update(9)update reference phase offsets✨
zl3073x_ref_state_fetch(9)fetch input reference state from hardware✨
zl3073x_ref_state_get(9)get current input reference state✨
zl3073x_ref_state_set(9)commit input reference state changes to hardware✨
zl3073x_ref_state_update(9)update input reference status from HW✨
zl3073x_ref_sync_mode_get(9)get sync control mode✨
zl3073x_ref_sync_mode_set(9)set sync control mode✨
zl3073x_ref_sync_pair_get(9)get sync pair reference index✨
zl3073x_ref_sync_pair_set(9)set sync pair reference index✨
zl3073x_synth_dpll_get(9)get DPLL ID the synth is driven by✨
zl3073x_synth_freq_get(9)get synth current freq✨
zl3073x_synth_is_enabled(9)check if the given synth is enabled✨
zl3073x_synth_state_fetch(9)fetch synth state from hardware✨
zl3073x_synth_state_get(9)get current synth state✨
zl3073x_update_hwreg(9)Update certain bits in HW register✨
zl3073x_write_hwreg(9)Write value to HW register✨
zl3073x_write_hwreg_seq(9)Write HW registers sequence✨
zl3073x_write_u16(9)write value to 16bit register✨
zl3073x_write_u32(9)write value to 32bit register✨
zl3073x_write_u48(9)write value to 48bit register✨
zl3073x_write_u8(9)write value to 16bit register✨
ZL_REG(9)define simple (non-indexed) register✨
ZL_REG_IDX(9)define indexed register✨
ZPA2326 theory of operations(9)✨
zpa2326_clear_fifo(9)Clear remaining entries in hardware FIFO.✨
zpa2326_config_oneshot(9)Setup device for one shot / on demand mode.✨
zpa2326_dequeue_pressure(9)Retrieve the most recent pressure sample from hardware FIFO.✨
zpa2326_enable_device(9)Enable device, i.e. get out of low power mode.✨
zpa2326_fetch_raw_sample(9)Retrieve a raw sample and convert it to CPU endianness.✨
zpa2326_fill_sample_buffer(9)Enqueue new channel samples to IIO buffer.✨
zpa2326_handle_irq(9)Process hardware interrupts.✨
zpa2326_handle_threaded_irq(9)Interrupt bottom-half handler.✨
zpa2326_init_managed_trigger(9)Create interrupt driven / hardware trigger allowing to notify external devices a new sample is ready.✨
zpa2326_poll_oneshot_completion(9)Actively poll for one shot data ready.✨
zpa2326_postenable_buffer(9)Configure device for triggered sampling.✨
zpa2326_power_off(9)Power off device, i.e. disable attached power regulators.✨
zpa2326_power_on(9)Power on device to allow subsequent configuration.✨
zpa2326_preenable_buffer(9)Prepare device for configuring triggered sampling modes.✨
zpa2326_probe(9)Instantiate and register core ZPA2326 IIO device✨
zpa2326_remove(9)Unregister and destroy core ZPA2326 IIO device.✨
zpa2326_reset_device(9)Reset device to default hardware state.✨
zpa2326_resume(9)Request the PM layer to power supply the device.✨
zpa2326_sample_oneshot(9)Perform a complete one shot sampling cycle.✨
zpa2326_set_trigger_state(9)Start / stop continuous sampling.✨
zpa2326_sleep(9)Disable device, i.e. switch to low power mode.✨
zpa2326_start_oneshot(9)Start a single sampling cycle, i.e. in one shot mode.✨
zpa2326_suspend(9)Schedule a power down using autosuspend feature of PM layer.✨
zpa2326_trigger_handler(9)Perform an IIO buffered sampling round in one shot mode.✨
zpa2326_wait_oneshot_completion(9)Wait for oneshot data ready interrupt.✨
zpci_add_device(9)Add a previously created zPCI device to the zPCI subsystem✨
zpci_bus_for_each(9)iterate over all the registered zbus objects✨
zpci_bus_get_next(9)get the next zbus object from given position in the list✨
zpci_bus_release(9)Un-initialize resources associated with the zbus and free memory✨
zpci_clear_error_state(9)Clears the zPCI error state of the device✨
zpci_create_device(9)Create a new zpci_dev and add it to the zbus✨
zpci_deconfigure_device(9)Deconfigure a zpci_dev✨
zpci_device_reserved(9)Mark device as reserved✨
zpci_hot_reset_device(9)perform a reset of the given zPCI function✨
zpci_iov_find_parent_pf(9)Find the parent PF, if any, of the given function✨
zpci_report_status(9)Report the status of operations on a PCI device✨
zpci_reset_load_store_blocked(9)Re-enables L/S from error state✨
zpci_scan_configured_device(9)Scan a freshly configured zpci_dev✨
zpdesc_folio(9)The folio allocated for a zpdesc✨
zs_create_pool(9)Creates an allocation pool to work from.✨
zs_huge_class_size(9)Returns the size (in bytes) of the first huge zsmalloc &size_class.✨