📦 linux-manual

82568 pages · page 367 of 413

T (continued)

ti_sci_cmd_put_device(9)command to release a device managed by TISCI✨
ti_sci_cmd_rm_psil_pair(9)Pair PSI-L source to destination thread✨
ti_sci_cmd_rm_psil_unpair(9)Unpair PSI-L source from destination thread✨
ti_sci_cmd_rm_ring_cfg(9)Configure a NAVSS ring✨
ti_sci_cmd_rm_udmap_rx_ch_cfg(9)Configure a UDMAP RX channel✨
ti_sci_cmd_rm_udmap_rx_flow_cfg(9)Configure UDMAP RX FLOW✨
ti_sci_cmd_rm_udmap_tx_ch_cfg(9)Configure a UDMAP TX channel✨
ti_sci_cmd_set_device_constraint(9)Set LPM constraint on behalf of a device✨
ti_sci_cmd_set_device_resets(9)command to set resets for device managed by TISCI✨
ti_sci_cmd_set_event_map(9)Configure an event based irq route between the requested source and Interrupt Aggregator.✨
ti_sci_cmd_set_io_isolation(9)Enable IO isolation in LPM✨
ti_sci_cmd_set_irq(9)Configure a host irq route between the requested source and destination.✨
ti_sci_cmd_set_latency_constraint(9)Set LPM resume latency constraint✨
ti_sci_debug_show(9)Helper to dump the debug log✨
ti_sci_debugfs_create(9)Create log debug file✨
ti_sci_do_xfer(9)Do one transfer✨
ti_sci_dump_header_dbg(9)Helper to dump a message header.✨
ti_sci_free_irq(9)Helper api to free the irq route between the requested source and destination✨
ti_sci_get_by_phandle(9)Get the TI SCI handle using DT phandle✨
ti_sci_get_device_state(9)Get device state helper✨
ti_sci_get_free_resource(9)Get a free resource from TISCI resource.✨
ti_sci_get_handle(9)Get the TI SCI handle for a device✨
ti_sci_get_num_resources(9)Get the number of resources in TISCI resource✨
ti_sci_get_one_xfer(9)Allocate one message✨
ti_sci_get_resource_range(9)Helper to get a range of resources assigned to a host. Resource is uniquely identified by type and subtype.✨
ti_sci_inta_ack_irq(9)Ack an event✨
ti_sci_inta_alloc_event(9)Attach an event to a IA vint.✨
ti_sci_inta_alloc_irq(9)Allocate an irq within INTA domain✨
ti_sci_inta_alloc_parent_irq(9)Allocate parent irq to Interrupt aggregator✨
ti_sci_inta_free_irq(9)Free an IRQ within INTA domain✨
ti_sci_inta_free_parent_irq(9)Free a parent irq to INTA✨
ti_sci_inta_irq_domain_alloc(9)Allocate Interrupt aggregator IRQs✨
ti_sci_inta_irq_domain_free(9)Free an IRQ from the IRQ domain✨
ti_sci_inta_irq_handler(9)Chained IRQ handler for the vint irqs✨
ti_sci_inta_manage_event(9)Control the event based on the offset✨
ti_sci_inta_mask_irq(9)Mask an event✨
ti_sci_inta_release_resources(9)Release resources for input irq✨
ti_sci_inta_request_resources(9)Allocate resources for input irq✨
ti_sci_inta_set_type(9)Update the trigger type of the irq.✨
ti_sci_inta_unmask_irq(9)Unmask an event✨
ti_sci_inta_xlate_irq(9)Translate hwirq to parent's hwirq.✨
ti_sci_intr_alloc_parent_irq(9)Allocate parent IRQ✨
ti_sci_intr_irq_domain_alloc(9)Allocate Interrupt router IRQs✨
ti_sci_intr_irq_domain_free(9)Free the specified IRQs from the domain.✨
ti_sci_intr_irq_domain_translate(9)Retrieve hwirq and type from IRQ firmware specific handler.✨
ti_sci_intr_xlate_irq(9)Translate hwirq to parent's hwirq.✨
ti_sci_irq_equal(9)Helper API to compare two irqs (generic headers are not compared)✨
ti_sci_irq_hash(9)Helper API to compute irq hash for the hash table.✨
ti_sci_is_response_ack(9)Generic ACK/NACK message checkup✨
ti_sci_manage_irq(9)Helper api to configure/release the irq route between the requested source and destination✨
ti_sci_msg_cmd_lpm_wake_reason(9)Get the wakeup source from LPM✨
ti_sci_msg_cmd_query_fw_caps(9)Get the FW/SoC capabilities✨
ti_sci_put_handle(9)Release the handle acquired by ti_sci_get_handle✨
ti_sci_put_one_xfer(9)Release a message✨
ti_sci_release_resource(9)Release a resource from TISCI resource.✨
ti_sci_reset_assert(9)assert device reset✨
ti_sci_reset_deassert(9)deassert device reset✨
ti_sci_reset_of_xlate(9)translate a set of OF arguments to a reset ID✨
ti_sci_reset_set(9)program a device's reset✨
ti_sci_reset_status(9)check device reset status✨
ti_sci_rx_callback(9)mailbox client callback for receive messages✨
ti_sci_set_clock_state(9)Set clock state helper✨
ti_sci_set_device_state(9)Set device state helper✨
ti_sci_set_irq(9)Helper api to configure the irq route between the requested source and destination✨
ti_sysc_clkdm_init(9)find clockdomain based on clock✨
ti_syscon_reset_assert(9)assert device reset✨
ti_syscon_reset_deassert(9)deassert device reset✨
ti_syscon_reset_status(9)check device reset status✨
ti_thermal_hotspot_temperature(9)returns sensor extrapolated temperature✨
tick_broadcast_control(9)Enable/disable or force broadcast mode✨
tick_broadcast_oneshot_control(9)Enter/exit broadcast oneshot mode✨
tick_broadcast_setup_oneshot(9)setup the broadcast device✨
tick_freeze(9)Suspend the local tick and (possibly) timekeeping.✨
tick_init(9)initialize the tick control✨
tick_init_highres(9)switch to high resolution mode✨
tick_is_oneshot_available(9)check for a oneshot capable event device✨
tick_nohz_get_idle_calls_cpu(9)return the current idle calls counter value for a particular CPU.✨
tick_nohz_get_next_hrtimer(9)return the next expiration time for the hrtimer or the tick, whichever expires first. Note that, if the tick has been stopped, it returns the next hrtimer.✨
tick_nohz_get_sleep_length(9)return the expected length of the current sleep✨
tick_nohz_idle_enter(9)prepare for entering idle on the current CPU✨
tick_nohz_idle_exit(9)Update the tick upon idle task exit✨
tick_nohz_idle_got_tick(9)Check whether or not the tick handler has run✨
tick_nohz_idle_stop_tick(9)stop the idle tick from the idle task✨
tick_nohz_irq_exit(9)Notify the tick about IRQ exit✨
tick_nohz_next_event(9)return the clock monotonic based next event✨
tick_nohz_switch_to_nohz(9)switch to NOHZ mode✨
tick_nohz_update_jiffies(9)update jiffies when idle was interrupted✨
tick_offline_cpu(9)Shutdown all clock events related to this CPU and take it out of the broadcast mechanism.✨
tick_oneshot_mode_active(9)check whether the system is in oneshot mode✨
tick_program_event(9)program the CPU local timer device for the next event✨
tick_resume(9)Resume the tick and the broadcast device✨
tick_resume_local(9)Resume the local tick device✨
tick_resume_oneshot(9)resume oneshot mode✨
tick_setup_oneshot(9)setup the event device for oneshot mode (hres or nohz)✨
tick_setup_sched_timer(9)setup the tick emulation timer✨
tick_suspend(9)Suspend the tick and the broadcast device✨
tick_suspend_local(9)Suspend the local tick device✨
tick_switch_to_oneshot(9)switch to oneshot mode✨
tick_unfreeze(9)Resume the local tick and (possibly) timekeeping.✨
TID configuration(9)✨
TID RDMA READ protocol(9)✨
tid_flush_pages(9)dump out pages into pagesets✨
tid_rdma_find_phys_blocks_4k(9)get groups base on mr info✨
tid_rdma_find_phys_blocks_8k(9)get groups base on mr info✨
tid_rdma_schedule_tid_wakeup(9)schedule wakeup for a qp✨
tid_rdma_trigger_resume(9)field a trigger work request✨
Tile group(9)✨
tiling swizzling details(9)✨
Time Events - what is it?(9)✨
Time travel shared memory overview(9)✨
time64_to_tm(9)converts the calendar time to local broken-down time✨
time_after(9)returns true if the time a is after time b.✨
time_after32(9)compare two 32-bit relative times✨
time_after64(9)returns true if the time a is after time b.✨
time_after_eq(9)returns true if the time a is after or the same as time b.✨
time_after_eq64(9)returns true if the time a is after or the same as time b.✨
time_before(9)returns true if the time a is before time b.✨
time_before64(9)returns true if the time a is before time b.✨
time_before_eq(9)returns true if the time a is before or the same as time b.✨
time_before_eq64(9)returns true if the time a is before or the same as time b.✨
time_between32(9)check if a 32-bit timestamp is within a given time range✨
time_delta(9)Calculate the delta between new and old time stamp✨
time_in_range(9)Calculate whether a is in the range of [b, c].✨
time_in_range64(9)Calculate whether a is in the range of [b, c].✨
time_in_range_open(9)Calculate whether a is in the range of [b, c).✨
time_is_after_eq_jiffies(9)return true if a is after or equal to jiffies✨
time_is_after_eq_jiffies64(9)return true if a is after or equal to jiffies_64✨
time_is_after_jiffies(9)return true if a is after jiffies✨
time_is_after_jiffies64(9)return true if a is after jiffies_64✨
time_is_before_eq_jiffies(9)return true if a is before or equal to jiffies✨
time_is_before_eq_jiffies64(9)return true if a is before or equal to jiffies_64✨
time_is_before_jiffies(9)return true if a is before jiffies✨
time_is_before_jiffies64(9)return true if a is before jiffies_64✨
timecounter_adjtime(9)Shifts the time of the clock.✨
timecounter_cyc2time(9)convert a cycle counter to same time base as values returned by timecounter_read()✨
timecounter_init(9)initialize a time counter✨
timecounter_read(9)return nanoseconds elapsed since timecounter_init() plus the initial time stamp✨
timecounter_read_delta(9)get nanoseconds since last call of this function✨
timed_wait_for_timeout(9)wait special event with timeout✨
timekeeping_clocksource_has_base(9)Check whether the current clocksource is based on given a base clock✨
timekeeping_forward_now(9)update clock to the current time✨
timekeeping_inject_sleeptime64(9)Adds suspend interval to timeekeeping values✨
timekeeping_max_deferment(9)Returns max time the clocksource can be deferred✨
timekeeping_notify(9)Install a new clock source✨
timekeeping_resume(9)Resumes the generic timekeeping subsystem.✨
timekeeping_valid_for_hres(9)Check if timekeeping is suitable for hres✨
timeout_fatal_disable (bool)(9)✨
timeout_period (uint)(9)✨
timeout_store(9)set number of seconds to wait for firmware✨
timer_base_is_idle(9)Return whether timer base is set idle✨
timer_base_try_to_set_idle(9)Try to set the idle state of the timer bases✨
timer_clear_idle(9)Clear the idle state of the timer base✨
timer_delete(9)Deactivate a timer✨
timer_delete_sync(9)Deactivate a timer and wait for the handler to finish.✨
timer_delete_sync_try(9)Try to deactivate a timer✨
timer_expire_remote(9)expire global timers of cpu✨
timer_init_key(9)initialize a timer✨
timer_lock_remote_bases(9)lock timer bases of cpu✨
timer_of_cleanup(9)release timer_of resources✨
timer_of_clk_exit(9)Release the clock resources✨
timer_of_clk_init(9)Initialize the clock resources✨
timer_of_irq_exit(9)Release the interrupt✨
timer_of_irq_init(9)Request the interrupt✨
timer_pending(9)is a timer pending?✨
timer_reduce(9)Modify a timer's timeout if it would reduce the timeout✨
timer_setup(9)prepare a timer for first use✨
timer_shutdown(9)Deactivate a timer and prevent rearming✨
timer_shutdown_sync(9)Shutdown a timer and prevent rearming✨
timer_unlock_remote_bases(9)unlock timer bases of cpu✨
timerlat_aa_destroy(9)Destroy timerlat auto-analysis✨
timerlat_aa_init(9)Initialize timerlat auto-analysis✨
timerlat_auto_analysis(9)Analyze the collected data✨
timerlat_u_dispatcher(9)dispatch one timerlatu/ process per monitored CPU✨
timerqueue_add(9)Adds timer to timerqueue.✨
timerqueue_del(9)Removes a timer from the timerqueue.✨
timerqueue_getnext(9)Returns the timer with the earliest expiration time✨
timerqueue_iterate_next(9)Returns the timer after the provided timer✨
timespec64_add_ns(9)Adds nanoseconds to a timespec64✨
timespec64_add_safe(9)Add two timespec64 values and do a safety check for overflow.✨
timespec64_to_jiffies(9)convert a timespec64 value to jiffies✨
timespec64_to_ns(9)Convert timespec64 to nanoseconds✨
timestamp_truncate(9)Truncate timespec to a granularity✨
timing_setup(9)shared timing computation and load✨
tioccons(9)allow admin to move logical console✨
tiocgetd(9)get line discipline✨
tiocgpgrp(9)get process group✨
tiocgsid(9)get session id✨
tiocgwinsz(9)implement window query ioctl✨
tiocsctty(9)set controlling tty✨
tiocsetd(9)set line discipline✨
tiocspgrp(9)attempt to set process group✨
tiocsti(9)fake input character✨
tiocswinsz(9)implement window size set ioctl✨
tipc_accept(9)wait for connection request✨
tipc_aead_clone(9)Clone a TIPC AEAD key✨
tipc_aead_decrypt(9)Decrypt an encrypted message✨
tipc_aead_encrypt(9)Encrypt a message✨
tipc_aead_free(9)Release AEAD key incl. all the TFMs in the list✨
tipc_aead_init(9)Initiate TIPC AEAD✨
tipc_aead_key_generate(9)Generate new session key✨