📦 linux-manual

T (continued)

• thc_interrupt_config(9)Configure THC interrupts✨
• thc_interrupt_enable(9)Enable or disable THC interrupt✨
• thc_interrupt_handler(9)Handle THC interrupts✨
• thc_interrupt_quiesce(9)Quiesce or unquiesce external touch device interrupt✨
• thc_ltr_config(9)Configure THC Latency Tolerance Reporting(LTR) settings✨
• thc_ltr_unconfig(9)Unconfigure THC Latency Tolerance Reporting(LTR) settings✨
• thc_port_select(9)Set THC port type✨
• thc_rxdma_read(9)Read data from RXDMA buffer✨
• thc_rxdma_reset(9)Reset all read DMA engines✨
• thc_set_pio_interrupt_support(9)Determine PIO interrupt is supported or not✨
• thc_spi_input_output_address_config(9)Configure SPI input and output addresses✨
• thc_spi_read_config(9)Configure SPI bus read attributes✨
• thc_spi_write_config(9)Configure SPI bus write attributes✨
• thc_swdma_read(9)Use software DMA to read data from touch device✨
• thc_tic_pio_read(9)Read data from touch device by PIO✨
• thc_tic_pio_write(9)Write data to touch device by PIO✨
• thc_tic_pio_write_and_read(9)Write data followed by read data by PIO✨
• thc_wot_config(9)Query and configure wake-on-touch feature✨
• thc_wot_unconfig(9)Unconfig wake-on-touch feature✨
• The i915 register macro definition style guide(9)✨
• The IP Accelerator(9)✨
• The IPA embedded microcontroller(9)✨
• The IPA Generic Software Interface(9)✨
• The VF FLR Flow with GuC(9)✨
• The VF FLR state machine(9)✨
• The VF PAUSE state machine(9)✨
• The VF RESTORE state machine(9)✨
• The VF RESUME state machine(9)✨
• The VF SAVE state machine(9)✨
• The VF state machine(9)✨
• The VF STOP state machine(9)✨
• Theory of Operation(9)✨
• Theory of operation(9)✨
• thermal_acpi_active_trip_temp(9)Retrieve active trip point temperature✨
• thermal_acpi_critical_trip_temp(9)Retrieve critical trip point temperature✨
• thermal_acpi_hot_trip_temp(9)Retrieve hot trip point temperature✨
• thermal_acpi_passive_trip_temp(9)Retrieve passive trip point temperature✨
• thermal_bind_cdev_to_trip(9)bind a cooling device to a thermal zone✨
• thermal_cdev_update(9)update cooling device state if needed✨
• thermal_cdev_update_nocheck(9)Unconditionally update cooling device state✨
• thermal_cooling_device_register(9)register a new thermal cooling device✨
• thermal_cooling_device_unregister(9)removes a thermal cooling device✨
• thermal_cooling_device_update(9)Update a cooling device object✨
• thermal_debug_cdev_add(9)Add a cooling device debugfs entry✨
• thermal_debug_cdev_remove(9)Remove a cooling device debugfs entry✨
• thermal_debug_cdev_state_update(9)Update a cooling device state change✨
• thermal_fwnode_cooling_device_register(9)register an thermal cooling device✨
• thermal_of_cooling_device_register(9)register an OF thermal cooling device✨
• thermal_of_get_trip_type(9)Get phy mode for given device_node✨
• thermal_of_zone_register(9)Register a thermal zone with device node sensor✨
• thermal_of_zone_unregister(9)Cleanup the specific allocated ressources✨
• thermal_set_governor(9)Switch to another governor✨
• thermal_throttling_logging(9)✨
• thermal_unbind_cdev_from_trip(9)unbind a cooling device from a thermal zone.✨
• thermal_zone_device_register_with_trips(9)register a new thermal zone device✨
• thermal_zone_device_unregister(9)removes the registered thermal zone device✨
• thermal_zone_get_offset(9)return the offset attribute of the thermal zone✨
• thermal_zone_get_slope(9)return the slope attribute of the thermal zone✨
• thermal_zone_get_temp(9)returns the temperature of a thermal zone✨
• thermal_zone_get_zone_by_name(9)search for a zone and returns its ref✨
• thermtrip_program(9)Configures the hardware to shut down the system if a given sensor group reaches a given temperature✨
• thp_order(9)Order of a transparent huge page.✨
• thp_size(9)Size of a transparent huge page.✨
• thp_vma_allowable_orders(9)determine hugepage orders that are allowed for vma✨
• thread_group_sample_cputime(9)Sample cputime for a given task✨
• thread_group_start_cputime(9)Start cputime and return a sample✨
• throtl_add_bio_tg(9)add a bio to the specified throtl_grp✨
• throtl_log(9)log debug message via blktrace✨
• throtl_peek_queued(9)peek the first bio on a qnode list✨
• throtl_pending_timer_fn(9)timer function for service_queue->pending_timer✨
• throtl_pop_queued(9)pop the first bio form a qnode list✨
• throtl_qnode_add_bio(9)add a bio to a throtl_qnode and activate it✨
• throtl_schedule_next_dispatch(9)schedule the next dispatch cycle✨
• throttlectl_cpu_level_cfg(9)programs CCROC NV_THERM level config✨
• throttlectl_cpu_level_select(9)program CPU pulse skipper config✨
• throttlectl_cpu_mn(9)program CPU pulse skipper configuration✨
• throttlectl_gpu_level_select(9)selects throttling level for GPU✨
• throttrip_program(9)Configures the hardware to throttle the pulse if a given sensor group reaches a given temperature✨
• ti bandgap feature types(9)✨
• ti81xx_restart(9)trigger a software restart of the SoC✨
• ti_abb_check_txdone(9)handy wrapper to check ABB tranxdone status✨
• ti_abb_clear_all_txdone(9)clears ABB tranxdone event✨
• ti_abb_clear_txdone(9)handy wrapper to clear ABB tranxdone status✨
• ti_abb_get_voltage_sel(9)Regulator accessor to get current ABB LDO setting✨
• ti_abb_init_table(9)Initialize ABB table from device tree✨
• ti_abb_init_timings(9)setup ABB clock timing for the current platform✨
• ti_abb_probe(9)Initialize an ABB ldo instance✨
• ti_abb_program_ldovbb(9)program LDOVBB register for override value✨
• ti_abb_rmw(9)handy wrapper to set specific register bits✨
• ti_abb_set_opp(9)Setup ABB and LDO VBB for required bias✨
• ti_abb_set_voltage_sel(9)regulator accessor function to set ABB LDO✨
• ti_abb_wait_txdone(9)waits for ABB tranxdone event✨
• ti_bandgap_adc_to_mcelsius(9)converts an ADC value to mCelsius scale✨
• ti_bandgap_build(9)parse DT and setup a struct ti_bandgap✨
• ti_bandgap_force_single_read(9)executes 1 single ADC conversion✨
• ti_bandgap_get_sensor_data(9)helper function to get thermal framework related data.✨
• ti_bandgap_get_trend(9)To fetch the temperature trend of a sensor✨
• ti_bandgap_power(9)controls the power state of a bandgap device✨
• ti_bandgap_read_counter(9)read the sensor counter✨
• ti_bandgap_read_counter_delay(9)read the sensor counter delay✨
• ti_bandgap_read_temp(9)helper function to read sensor temperature✨
• ti_bandgap_read_temperature(9)report current temperature✨
• ti_bandgap_read_update_interval(9)read the sensor update interval✨
• ti_bandgap_readl(9)simple read helper function✨
• ti_bandgap_set_continuous_mode(9)One time enabling of continuous mode✨
• ti_bandgap_set_sensor_data(9)helper function to store thermal framework related data.✨
• ti_bandgap_talert_init(9)setup and initialize talert handling✨
• ti_bandgap_talert_irq_handler(9)handles Temperature alert IRQs✨
• ti_bandgap_tshut_init(9)setup and initialize tshut handling✨
• ti_bandgap_tshut_irq_handler(9)handles Temperature shutdown signal✨
• ti_bandgap_validate(9)helper to check the sanity of a struct ti_bandgap✨
• ti_bandgap_write_counter(9)set the bandgap sensor counter✨
• ti_bandgap_write_counter_delay(9)set the counter_delay✨
• ti_bandgap_write_update_interval(9)set the update interval✨
• ti_bandgap_writel(9)simple write helper function✨
• ti_clk_add_alias(9)add a clock alias for a TI clock✨
• ti_clk_add_aliases(9)setup clock aliases✨
• ti_clk_add_component(9)add a component clock to the pool✨
• ti_clk_get_features(9)get clock driver features flags✨
• ti_clk_get_legacy_bit_shift(9)get bit shift for a clock register✨
• ti_clk_get_reg_addr(9)get register address for a clock register✨
• ti_clk_init_features(9)init clock features struct for the SoC✨
• ti_clk_is_in_standby(9)Check if clkctrl clock is in standby or not✨
• ti_clk_retry_init(9)retries a failed clock init at later phase✨
• ti_clk_setup_features(9)setup clock features flags✨
• ti_clk_setup_ll_ops(9)setup low level clock operations✨
• ti_cpufreq_get_efuse(9)Parse and return efuse value present on SoC✨
• ti_cpufreq_get_rev(9)Parse and return rev value present on SoC✨
• ti_dt_clk_init_retry_clks(9)init clocks from the retry list✨
• ti_dt_clk_name(9)init clock name from first output name or node name✨
• ti_dt_clockdomains_setup(9)setup device tree clockdomains✨
• ti_dt_clocks_register(9)register DT alias clocks during boot✨
• ti_emif_copy_pm_function_table(9)copy mapping of pm funcs in sram✨
• ti_emif_get_mem_type(9)return type for memory type in use✨
• ti_errata814_bandgap_read_temp(9)helper function to read dra7 sensor temperature✨
• ti_iodelay_alloc_pins(9)Allocate structures needed for pins for iodelay✨
• ti_iodelay_compute_dpe(9)Compute equation for delay parameter✨
• ti_iodelay_dt_node_to_map(9)Map a device tree node to appropriate group✨
• ti_iodelay_extract(9)extract bits for a field✨
• ti_iodelay_get_pingroup(9)Find the group mapped by a group selector✨
• ti_iodelay_node_iterator(9)Iterate iodelay node✨
• ti_iodelay_offset_to_pin(9)get a pin index based on the register offset✨
• ti_iodelay_pin_to_offset(9)get pin register offset based on the pin index✨
• ti_iodelay_pinconf_deinit_dev(9)deinit the iodelay device✨
• ti_iodelay_pinconf_group_dbg_show(9)show the group information✨
• ti_iodelay_pinconf_group_get(9)Get the group configuration✨
• ti_iodelay_pinconf_group_set(9)Configure the groups of pins✨
• ti_iodelay_pinconf_init_dev(9)Initialize IODelay device✨
• ti_iodelay_pinconf_set(9)Configure the pin configuration✨
• ti_iodelay_probe(9)Standard probe✨
• ti_msgmgr_last_tx_done(9)See if all the tx messages are sent✨
• ti_msgmgr_of_xlate(9)Translation of phandle to queue✨
• ti_msgmgr_queue_get_num_messages(9)Get the number of pending messages✨
• ti_msgmgr_queue_is_error(9)Check to see if there is queue error✨
• ti_msgmgr_queue_peek_data(9)Peek to see if there are any rx messages.✨
• ti_msgmgr_queue_rx_interrupt(9)Interrupt handler for receive Queue✨
• ti_msgmgr_queue_rx_irq_req(9)RX IRQ request✨
• ti_msgmgr_queue_setup(9)Setup data structures for each queue instance✨
• ti_msgmgr_queue_shutdown(9)Shutdown the queue✨
• ti_msgmgr_queue_startup(9)Startup queue✨
• ti_msgmgr_send_data(9)Send data✨
• ti_sci_clk_probe(9)Probe function for the TI SCI clock driver✨
• ti_sci_clk_remove(9)Remove TI SCI clock device✨
• ti_sci_cmd_clk_get_freq(9)Get current frequency✨
• ti_sci_cmd_clk_get_match_freq(9)Find a good match for frequency✨
• ti_sci_cmd_clk_get_num_parents(9)Get num parents of the current clk source✨
• ti_sci_cmd_clk_get_parent(9)Get current parent clock source✨
• ti_sci_cmd_clk_is_auto(9)Is the clock being auto managed✨
• ti_sci_cmd_clk_is_off(9)Is the clock OFF✨
• ti_sci_cmd_clk_is_on(9)Is the clock ON✨
• ti_sci_cmd_clk_set_freq(9)Set a frequency for clock✨
• ti_sci_cmd_clk_set_parent(9)Set the clock source of a specific device clock✨
• ti_sci_cmd_dev_get_clcnt(9)Get context loss counter✨
• ti_sci_cmd_dev_is_idle(9)Check if the device is requested to be idle✨
• ti_sci_cmd_dev_is_on(9)Check if the device is requested to be ON✨
• ti_sci_cmd_dev_is_stop(9)Check if the device is requested to be stopped✨
• ti_sci_cmd_dev_is_trans(9)Check if the device is currently transitioning✨
• ti_sci_cmd_dev_is_valid(9)Is the device valid✨
• ti_sci_cmd_free_event_map(9)Free an event map between the requested source and Interrupt Aggregator.✨
• ti_sci_cmd_free_irq(9)Free a host irq route between the between the requested source and destination.✨
• ti_sci_cmd_get_clock(9)Get control of a clock from TI SCI✨
• ti_sci_cmd_get_clock_state(9)Get clock state helper✨
• ti_sci_cmd_get_device(9)command to request for device managed by TISCI that can be shared with other hosts.✨
• ti_sci_cmd_get_device_exclusive(9)command to request for device managed by TISCI that is exclusively owned by the requesting host.✨
• ti_sci_cmd_get_device_resets(9)Get reset state for device managed by TISCI✨
• ti_sci_cmd_get_resource_range(9)Get a range of resources assigned to host that is same as ti sci interface host.✨
• ti_sci_cmd_get_resource_range_from_shost(9)Get a range of resources assigned to a specified host.✨
• ti_sci_cmd_get_revision(9)command to get the revision of the SCI entity✨
• ti_sci_cmd_idle_clock(9)Idle a clock which is in our control✨
• ti_sci_cmd_idle_device(9)Command to idle a device managed by TISCI✨
• ti_sci_cmd_idle_device_exclusive(9)Command to idle a device managed by TISCI that is exclusively owned by requesting host.✨
• ti_sci_cmd_lpm_abort(9)Abort entry to LPM by clearing selection of LPM to enter✨
• ti_sci_cmd_prepare_sleep(9)Prepare system for system suspend✨
• ti_sci_cmd_proc_get_status(9)Command to get the processor boot status✨
• ti_sci_cmd_proc_handover(9)Command to handover a physical processor control to a host in the processor's access control list.✨
• ti_sci_cmd_proc_release(9)Command to release a physical processor control✨
• ti_sci_cmd_proc_request(9)Command to request a physical processor control✨
• ti_sci_cmd_proc_set_config(9)Command to set the processor boot configuration flags✨
• ti_sci_cmd_proc_set_control(9)Command to set the processor boot control flags✨
• ti_sci_cmd_put_clock(9)Release a clock from our control back to TISCI✨