📦 linux-manual

B (continued)

• balloon_page_dequeue(9)removes a page from balloon's page list and returns its address to allow the driver to release the page.✨
• balloon_page_enqueue(9)inserts a new page into the balloon page list.✨
• balloon_page_finalize(9)prepare a balloon page that was removed from the balloon list for release to the page allocator✨
• balloon_page_insert(9)insert a page into the balloon's page list and make the page->private assignment accordingly.✨
• balloon_page_list_dequeue(9)removes pages from balloon's page list and returns a list of the pages.✨
• balloon_page_list_enqueue(9)inserts a list of pages into the balloon page list.✨
• bam_addr(9)returns BAM register address✨
• bam_alloc_chan(9)Allocate channel resources for DMA channel.✨
• bam_apply_new_config(9)✨
• bam_chan_init_hw(9)Initialize channel hardware✨
• bam_dma_free_desc(9)free descriptor memory✨
• bam_dma_irq(9)irq handler for bam controller✨
• bam_dma_terminate_all(9)terminate all transactions on a channel✨
• bam_free_chan(9)Frees dma resources associated with specific channel✨
• bam_init(9)✨
• bam_issue_pending(9)starts pending transactions✨
• bam_pause(9)Pause DMA channel✨
• bam_prep_slave_sg(9)Prep slave sg transaction✨
• bam_reset(9)reset and initialize BAM registers✨
• bam_reset_channel(9)Reset individual BAM DMA channel✨
• bam_resume(9)Resume DMA channel operations✨
• bam_slave_config(9)set slave configuration for channel✨
• bam_start_dma(9)start next transaction✨
• bam_tx_status(9)returns status of transaction✨
• bandgap driver data structure(9)✨
• bang_bang_trip_crossed(9)controls devices associated with the given zone✨
• bapm (int)(9)✨
• bar2_address(9)return the BAR2 address for an SGE Queue's Registers✨
• base64_decode(9)Base64-decode a string✨
• base64_encode(9)Base64-encode some binary data✨
• base_alloc_rdpq_dma_pool(9)Allocating DMA'able memory for reply queues.✨
• base_asce_alloc(9)create kernel mapping without enhanced DAT features✨
• base_asce_free(9)free asce and tables returned from base_asce_alloc()✨
• base_make_prp_nvme(9)Prepare PRPs (Physical Region Page) - SGLs specific to NVMe drives only✨
• baseboard_power(9)✨
• baseboard_power_limit(9)✨
• baseboard_temp(9)✨
• basename(9)find the last component of an hname✨
• Basic ANI Operation(9)✨
• basic clock multiplexer which can be controlled with a gpio output(9)✨
• basic gateable clock which can gate and ungate its output(9)✨
• basic gpio gated clock which can be enabled and disabled(9)✨
• Basic sk_buff geometry(9)✨
• baswap(9)Swaps the order of a bd address✨
• batadv_add_counter(9)Add to per cpu statistics counter of mesh interface✨
• batadv_algo_dump(9)fill in information about supported routing algorithms✨
• batadv_algo_dump_entry(9)fill in information about one supported routing algorithm✨
• batadv_algo_get(9)Search for algorithm with specific name✨
• batadv_algo_init(9)Initialize batman-adv algorithm management data structures✨
• batadv_algo_register(9)Register callbacks for a mesh algorithm✨
• batadv_algo_select(9)Select algorithm of mesh interface✨
• batadv_arp_get_type(9)parse an ARP packet and gets the type✨
• batadv_arp_hw_dst(9)extract the hw_dst field from an ARP packet✨
• batadv_arp_hw_src(9)extract the hw_src field from an ARP packet✨
• batadv_arp_ip_dst(9)extract the ip_dst field from an ARP packet✨
• batadv_arp_ip_src(9)extract the ip_src field from an ARP packet✨
• batadv_atomic_dec_not_zero(9)Decrease unless the number is 0✨
• batadv_backbone_gw_put(9)decrement the backbone gw refcounter and possibly release it✨
• batadv_backbone_gw_release(9)release backbone gw from lists and queue for free after rcu grace period✨
• batadv_backbone_hash_find(9)looks for a backbone gateway in the hash✨
• batadv_batman_skb_recv(9)Handle incoming message from an hard interface✨
• batadv_bit_get_packet(9)receive and process one packet within the sequence number window✨
• batadv_bitmap_shift_left(9)shift the sequence number bitmap left✨
• batadv_bla_add_claim(9)Adds a claim in the claim hash✨
• batadv_bla_answer_request(9)answer a bla request by sending own claims✨
• batadv_bla_backbone_dump(9)dump backbone table to a netlink socket✨
• batadv_bla_backbone_dump_bucket(9)dump one bucket of the backbone table to a netlink socket✨
• batadv_bla_backbone_dump_entry(9)dump one entry of the backbone table to a netlink socket✨
• batadv_bla_check_bcast_duplist(9)Check if a frame is in the broadcast dup.✨
• batadv_bla_check_claim(9)check if address is claimed✨
• batadv_bla_check_duplist(9)Check if a frame is in the broadcast dup.✨
• batadv_bla_check_ucast_duplist(9)Check if a frame is in the broadcast dup.✨
• batadv_bla_claim_dump(9)dump claim table to a netlink socket✨
• batadv_bla_claim_dump_bucket(9)dump one bucket of the claim table to a netlink socket✨
• batadv_bla_claim_dump_entry(9)dump one entry of the claim table to a netlink socket✨
• batadv_bla_claim_get_backbone_gw(9)Get valid reference for backbone_gw of claim✨
• batadv_bla_del_backbone_claims(9)delete all claims for a backbone✨
• batadv_bla_del_claim(9)delete a claim from the claim hash✨
• batadv_bla_free(9)free all bla structures✨
• batadv_bla_get_backbone_gw(9)finds or creates a backbone gateway✨
• batadv_bla_init(9)initialize all bla structures✨
• batadv_bla_is_backbone_gw(9)check if originator is a backbone gw for a VLAN✨
• batadv_bla_is_backbone_gw_orig(9)Check if the originator is a gateway for the VLAN identified by vid.✨
• batadv_bla_is_loopdetect_mac(9)check if the mac address is from a loop detect frame sent by bridge loop avoidance✨
• batadv_bla_loopdetect_check(9)check and handle a detected loop✨
• batadv_bla_loopdetect_report(9)worker for reporting the loop✨
• batadv_bla_periodic_work(9)performs periodic bla work✨
• batadv_bla_process_claim(9)Check if this is a claim frame, and process it✨
• batadv_bla_purge_backbone_gw(9)Remove backbone gateways after a timeout or immediately✨
• batadv_bla_purge_claims(9)Remove claims after a timeout or immediately✨
• batadv_bla_rx(9)check packets coming from the mesh.✨
• batadv_bla_send_announce(9)Send an announcement frame✨
• batadv_bla_send_claim(9)sends a claim frame according to the provided info✨
• batadv_bla_send_loopdetect(9)send a loopdetect frame✨
• batadv_bla_send_request(9)send a request to repeat claims✨
• batadv_bla_status_update(9)purge bla interfaces if necessary✨
• batadv_bla_tx(9)check packets going into the mesh✨
• batadv_bla_update_orig_address(9)Update the backbone gateways when the own originator address changes✨
• batadv_bla_update_own_backbone_gw(9)updates the own backbone gw for a VLAN✨
• batadv_check_claim_group(9)check for claim group membership✨
• batadv_check_known_mac_addr(9)warn about duplicate hard interface MAC addresses✨
• batadv_check_management_packet(9)Check preconditions for management packets✨
• batadv_check_unicast_packet(9)Check for malformed unicast packets✨
• batadv_check_unicast_ttvn(9)check and adjust the TTVN of a unicast packet✨
• batadv_choose_backbone_gw(9)choose the right bucket for a backbone gateway.✨
• batadv_choose_claim(9)choose the right bucket for a claim.✨
• batadv_choose_next_candidate(9)select the next DHT candidate✨
• batadv_choose_orig(9)Return the index of the orig entry in the hash table✨
• batadv_choose_tt(9)return the index of the tt entry in the hash table✨
• batadv_claim_hash_find(9)looks for a claim in the claim hash✨
• batadv_claim_put(9)decrement the claim refcounter and possibly release it✨
• batadv_claim_release(9)release claim from lists and queue for free after rcu grace period✨
• batadv_compare_backbone_gw(9)compare address and vid of two backbone gws✨
• batadv_compare_claim(9)compare address and vid of two claims✨
• batadv_compare_dat(9)comparing function used in the local DAT hash table✨
• batadv_compare_eth(9)Compare two not u16 aligned Ethernet addresses✨
• batadv_compare_orig(9)comparing function used in the originator hash table✨
• batadv_compare_tt(9)check if two TT entries are the same✨
• batadv_dat_addr_t(9)type used for all DHT addresses✨
• batadv_dat_arp_create_reply(9)create an ARP Reply✨
• batadv_dat_cache_dump(9)dump DAT cache table to a netlink socket✨
• batadv_dat_cache_dump_bucket(9)dump one bucket of the DAT cache table to a netlink socket✨
• batadv_dat_cache_dump_entry(9)dump one entry of the DAT cache table to a netlink socket✨
• batadv_dat_check_dhcp(9)examine packet for valid DHCP message✨
• batadv_dat_check_dhcp_ack(9)examine packet for valid DHCP message✨
• batadv_dat_check_dhcp_ipudp(9)check skb for IP+UDP headers valid for DHCP✨
• batadv_dat_dhcp_get_yiaddr(9)get yiaddr from a DHCP packet✨
• batadv_dat_drop_broadcast_packet(9)check if an ARP request has to be dropped (because the node has already obtained the reply via DAT) or not✨
• batadv_dat_entry_add(9)add a new dat entry or update it if already exists✨
• batadv_dat_entry_hash_find(9)look for a given dat_entry in the local hash table✨
• batadv_dat_entry_put(9)decrement the dat_entry refcounter and possibly release it✨
• batadv_dat_entry_release(9)release dat_entry from lists and queue for free after rcu grace period✨
• batadv_dat_forward_data(9)copy and send payload to the selected candidates✨
• batadv_dat_free(9)free the DAT internals✨
• batadv_dat_get_dhcp_chaddr(9)get chaddr from a DHCP packet✨
• batadv_dat_get_dhcp_message_type(9)get message type of a DHCP packet✨
• batadv_dat_get_vid(9)extract the VLAN identifier from skb if any✨
• batadv_dat_hash_free(9)free the local DAT hash table✨
• batadv_dat_inc_counter(9)increment the correct DAT packet counter✨
• batadv_dat_init(9)initialise the DAT internals✨
• batadv_dat_init_orig_node_addr(9)assign a DAT address to the orig_node✨
• batadv_dat_init_own_addr(9)assign a DAT address to the node itself✨
• batadv_dat_purge(9)periodic task that deletes old entries from the local DAT hash table✨
• batadv_dat_put_dhcp(9)puts addresses from a DHCP packet into the DHT and DAT cache✨
• batadv_dat_select_candidates(9)select the nodes which the DHT message has to be sent to✨
• batadv_dat_snoop_incoming_arp_reply(9)snoop the ARP reply and fill the local DAT storage only✨
• batadv_dat_snoop_incoming_arp_request(9)snoop the ARP request and try to answer using the local DAT storage✨
• batadv_dat_snoop_incoming_dhcp_ack(9)snoop DHCPACK and fill DAT cache✨
• batadv_dat_snoop_outgoing_arp_reply(9)snoop the ARP reply and fill the DHT✨
• batadv_dat_snoop_outgoing_arp_request(9)snoop the ARP request and try to answer using DAT✨
• batadv_dat_snoop_outgoing_dhcp_ack(9)snoop DHCPACK and fill DAT with it✨
• batadv_dat_start_timer(9)initialise the DAT periodic worker✨
• batadv_dat_status_update(9)update the dat tvlv container after dat setting change✨
• batadv_dat_to_purge(9)check whether a dat_entry has to be purged or not✨
• batadv_dat_tvlv_container_update(9)update the dat tvlv container after dat setting change✨
• batadv_dat_tvlv_ogm_handler_v1(9)process incoming dat tvlv container✨
• batadv_dbg(9)Store debug output without rate limiting✨
• batadv_dbg_arp(9)print a debug message containing all the ARP packet details✨
• batadv_dbg_ratelimited(9)Store debug output with rate limiting✨
• batadv_debug_log(9)Add debug log entry✨
• batadv_err(9)Store error in debug buffer and print it to kmsg buffer✨
• batadv_exit(9)batman-adv module exit function✨
• batadv_find_best_neighbor(9)finds the best neighbor after purging✨
• batadv_find_router(9)find a suitable router for this originator✨
• batadv_forw_bcast_packet(9)forward and queue a broadcast packet✨
• batadv_forw_bcast_packet_if(9)forward and queue a broadcast packet✨
• batadv_forw_bcast_packet_to_list(9)queue broadcast packet for transmissions✨
• batadv_forw_packet_alloc(9)allocate a forwarding packet✨
• batadv_forw_packet_bcast_queue(9)try to queue a broadcast packet✨
• batadv_forw_packet_bcasts_dec(9)decrement retransmission counter of a packet✨
• batadv_forw_packet_bcasts_left(9)check if a retransmission is necessary✨
• batadv_forw_packet_free(9)free a forwarding packet✨
• batadv_forw_packet_is_rebroadcast(9)check packet for previous transmissions✨
• batadv_forw_packet_list_free(9)free a list of forward packets✨
• batadv_forw_packet_list_steal(9)claim a list of forward packets for free()✨
• batadv_forw_packet_ogmv1_queue(9)try to queue an OGMv1 packet✨
• batadv_forw_packet_queue(9)try to queue a forwarding packet✨
• batadv_forw_packet_steal(9)claim a forw_packet for free()✨
• batadv_forw_packet_was_stolen(9)check whether someone stole this packet✨
• batadv_frag_check_entry(9)check if a list of fragments has timed out✨
• batadv_frag_clear_chain(9)delete entries in the fragment buffer chain✨
• batadv_frag_create(9)create a fragment from skb✨
• batadv_frag_init_chain(9)check and prepare fragment chain for new fragment✨
• batadv_frag_insert_packet(9)insert a fragment into a fragment chain✨
• batadv_frag_merge_packets(9)merge a chain of fragments✨
• batadv_frag_purge_orig(9)free fragments associated to an orig✨
• batadv_frag_send_packet(9)create up to 16 fragments from the passed skb✨
• batadv_frag_size_limit(9)maximum possible size of packet to be fragmented✨
• batadv_frag_skb_buffer(9)buffer fragment for later merge✨
• batadv_frag_skb_fwd(9)forward fragments that would exceed MTU when merged✨
• batadv_get_drvinfo(9)ethtool driver info handler for mesh interfaces✨
• batadv_get_ethtool_stats(9)ethtool stats handler for mesh interfaces✨
• batadv_get_real_netdev(9)check if the given net_device struct is a virtual interface on top of another 'real' interface✨
• batadv_get_sset_count(9)ethtool stringset size handler for mesh interfaces✨
• batadv_get_strings(9)ethtool string handler for mesh interfaces✨
• batadv_get_vid(9)extract the VLAN identifier from skb if any✨
• batadv_get_vlan_from_info(9)Retrieve vlan from genl attributes✨
• batadv_getlink_net(9)return link net namespace (of use fallback)✨
• batadv_gw_check_client_stop(9)check if client mode has been switched off✨
• batadv_gw_check_election(9)Elect orig node as best gateway when eligible✨