📦 linux-manual

M (continued)

• mipi_dsi_picture_parameter_set_multi(9)transmit the DSC PPS to the peripheral✨
• mipi_dsi_pixel_format_to_bpp(9)obtain the number of bits per pixel for any given pixel format defined by the MIPI DSI specification✨
• mipi_dsi_shutdown_peripheral(9)sends a Shutdown Peripheral command✨
• mipi_dsi_shutdown_peripheral_multi(9)sends a Shutdown Peripheral command✨
• mipi_dsi_turn_on_peripheral(9)sends a Turn On Peripheral command✨
• mipi_dsi_turn_on_peripheral_multi(9)sends a Turn On Peripheral command✨
• mips_cdmm_bus_discover(9)Discover the devices on the CDMM bus.✨
• mips_cdmm_cpu_down_prep(9)Callback for CPUHP DOWN_PREP: Tear down the CDMM bus.✨
• mips_cdmm_cpu_online(9)Callback for CPUHP ONLINE: Bring up the CDMM bus.✨
• mips_cdmm_cur_base(9)Find current physical base address of CDMM region.✨
• mips_cdmm_driver_register(9)Register a CDMM driver.✨
• mips_cdmm_driver_unregister(9)Unregister a CDMM driver.✨
• mips_cdmm_early_probe(9)Minimally probe for a specific device on CDMM.✨
• mips_cdmm_get_bus(9)Get the per-CPU CDMM bus information.✨
• mips_cdmm_init(9)Initialise CDMM bus.✨
• mips_cdmm_int_work(9)Call an int returning CDMM driver callback.✨
• mips_cdmm_phys_base(9)Choose a physical base address for CDMM region.✨
• mips_cdmm_release(9)Release a removed CDMM device.✨
• mips_cdmm_setup(9)Ensure the CDMM bus is initialised and usable.✨
• mips_cdmm_void_work(9)Call a void returning CDMM driver callback.✨
• mips_cm_error_report(9)Report CM cache errors✨
• mips_cm_has_l2sync(9)determine whether an L2-only sync region is present✨
• mips_cm_l2sync(9)perform an L2-only sync operation✨
• mips_cm_l2sync_phys_base(9)retrieve the physical base address of the CM L2-sync region✨
• mips_cm_lock_other(9)lock access to redirect/other region✨
• mips_cm_lock_other_cpu(9)lock access to redirect/other region✨
• mips_cm_max_vp_width(9)return the width in bits of VP indices✨
• mips_cm_phys_base(9)retrieve the physical base address of the CM✨
• mips_cm_present(9)determine whether a Coherence Manager is present✨
• mips_cm_probe(9)probe for a Coherence Manager✨
• mips_cm_revision(9)return CM revision✨
• mips_cm_unlock_other(9)unlock access to redirect/other region✨
• mips_cm_update_property(9)update property from the device tree✨
• mips_cm_vp_id(9)calculate the hardware VP ID for a CPU✨
• mips_cpc_default_phys_base(9)retrieve the default physical base address of the CPC✨
• mips_cpc_lock_other(9)lock access to another core core: the other core to be accessed✨
• mips_cpc_phys_base(9)retrieve the physical base address of the CPC✨
• mips_cpc_present(9)determine whether a Cluster Power Controller is present✨
• mips_cpc_probe(9)probe for a Cluster Power Controller✨
• mips_cpc_unlock_other(9)unlock access to another core✨
• mips_cps_cluster_config(9)return (GCR|CPC)_CONFIG from a cluster✨
• mips_cps_first_online_in_cluster(9)Detect if CPU is first online in cluster✨
• mips_cps_multicluster_cpus(9)Detect whether CPUs are in multiple clusters✨
• mips_cps_numclusters(9)return the number of clusters present in the system✨
• mips_cps_numcores(9)return the number of cores present in a cluster✨
• mips_cps_numiocu(9)return the number of IOCUs present in a cluster✨
• mips_cps_numvps(9)return the number of VPs (threads) supported by a core✨
• mips_cpu_restore(9)Restore general CPU state. Restores important CPU context.✨
• mips_cpu_save(9)Save general CPU state. Ensures that general CPU context is saved, notably FPU and DSP.✨
• mips_dsemul(9)'Emulate' an instruction from a branch delay slot✨
• mips_ejtag_fdc_handle(9)Handle FDC events.✨
• mips_ejtag_fdc_isr(9)Interrupt handler.✨
• mips_ejtag_fdc_put(9)Kernel thread to write out channel data to FDC.✨
• mips_ejtag_fdc_put_chan(9)Write out a block of channel data.✨
• mips_ejtag_fdc_tty_timer(9)Poll FDC for incoming data.✨
• mips_gic_present(9)Determine whether a GIC is present✨
• mips_gic_vx_map_reg(9)Return GIC_Vx_<intr>_MAP register offset✨
• mips_machine_is_compatible(9)check if a machine is compatible with an FDT✨
• mips_pm_notifier(9)Notifier for preserving general CPU context.✨
• mipsr2_decoder(9)Decode and emulate a MIPS R2 instruction✨
• mipsr6_emul(9)Emulate some frequent R2/R5/R6 instructions in delay slot for performance instead of the traditional way of using a stack trampoline which is rather slow.✨
• Mirror page tables(9)✨
• misc_cg_alloc(9)Allocate misc cgroup.✨
• misc_cg_cancel_charge(9)Cancel the charge from the misc cgroup.✨
• misc_cg_capacity_show(9)Show the total capacity of misc res on the host.✨
• misc_cg_current_show(9)Show the current usage of the misc cgroup.✨
• misc_cg_free(9)Free the misc cgroup.✨
• misc_cg_max_show(9)Show the misc cgroup max limit.✨
• misc_cg_max_write(9)Update the maximum limit of the cgroup.✨
• misc_cg_peak_show(9)Show the peak usage of the misc cgroup.✨
• misc_cg_set_capacity(9)Set the capacity of the misc cgroup res.✨
• misc_cg_try_charge(9)Try charging the misc cgroup.✨
• misc_cg_uncharge(9)Uncharge the misc cgroup.✨
• misc_deregister(9)unregister a miscellaneous device✨
• misc_register(9)register a miscellaneous device✨
• miss_read_end_req(9)Handle the end of a miss read request.✨
• mite_ack_linkc(9)Check and ack the LINKC interrupt,✨
• mite_alloc_ring(9)Allocate a MITE dma ring.✨
• mite_attach(9)Allocate and initialize a MITE device for a comedi driver.✨
• mite_buf_change(9)COMEDI subdevice (*buf_change) for a MITE dma ring.✨
• mite_bytes_in_transit(9)Returns the number of unread bytes in the fifo.✨
• mite_detach(9)Unmap and free a MITE device for a comedi driver.✨
• mite_dma_arm(9)Start a MITE dma transfer.✨
• mite_dma_disarm(9)Stop a MITE dma transfer.✨
• mite_done(9)Check is a MITE dma transfer is complete.✨
• mite_free_ring(9)Free a MITE dma ring and its descriptors.✨
• mite_init_ring_descriptors(9)Initialize a MITE dma ring descriptors.✨
• mite_prep_dma(9)Prepare a MITE dma channel for transfers.✨
• mite_release_channel(9)Release a MITE dma channel.✨
• mite_request_channel(9)Request a MITE dma channel.✨
• mite_request_channel_in_range(9)Request a MITE dma channel.✨
• mite_sync_dma(9)Sync the MITE dma with the COMEDI async buffer.✨
• mix(9)The Google CityHash 16-byte hash mixing function.✨
• mixart_wait_nice_for_register_value(9)wait for a value on a peudo register, exit with a timeout✨
• mk_cidxtid(9)construct @cidxtid field✨
• mksstat_init_kern_id(9)Creates a single mksGuestStat instance descriptor and kernel-internal counters. Adds PFN mapping to the hypervisor.✨
• mksstat_init_record_time(9)Initializes an MKSGuestStatCounterTime-based record for the respective mksGuestStat index.✨
• mktime64(9)Converts date to seconds.✨
• mldsa_verify(9)Verify an ML-DSA signature✨
• mlme_reset_request_sync(9)MLME_RESET_request/confirm according to API Spec✨
• mlme_set_request_sync(9)MLME_SET_request/confirm according to API Spec✨
• mlock_folio(9)mlock a folio already on (or temporarily off) LRU✨
• mlock_new_folio(9)mlock a newly allocated folio not yet on LRU✨
• mls_export_netlbl_cat(9)Export the MLS categories to NetLabel✨
• mls_export_netlbl_lvl(9)Export the MLS sensitivity levels to NetLabel✨
• mls_import_netlbl_cat(9)Import the MLS categories from NetLabel✨
• mls_import_netlbl_lvl(9)Import the NetLabel MLS sensitivity levels✨
• mlx4_ACCESS_PTYS_REG(9)Access PTYs (Port Type and Speed) register✨
• mlx4_ACCESS_REG(9)Generic access reg command.✨
• mlx4_ALLOCATE_VPP_get(9)Query port VPP available resources and allocation. Before distribution of VPPs to priorities, only available_vpp is returned. After initialization it returns the distribution of VPPs among priorities.✨
• mlx4_ALLOCATE_VPP_set(9)Distribution of VPPs among different priorities. The total number of VPPs assigned to all for a port must not exceed the value reported by available_vpp in mlx4_ALLOCATE_VPP_get. VPP allocation is…✨
• mlx4_en_phc_adjfine(9)adjust the frequency of the hardware clock✨
• mlx4_en_phc_adjtime(9)Shift the time of the hardware clock✨
• mlx4_en_phc_enable(9)enable or disable an ancillary feature✨
• mlx4_en_phc_gettime(9)Reads the current time from the hardware clock✨
• mlx4_en_phc_settime(9)Set the current time on the hardware clock✨
• mlx4_en_remove_timestamp(9)disable PTP device✨
• mlx4_get_module_info(9)Read cable module eeprom data✨
• mlx4_SET_PORT_PRIO2TC(9)This routine maps user priorities to traffic classes of a given port and device.✨
• mlx4_SET_PORT_SCHEDULER(9)This routine configures the arbitration between traffic classes (ETS) and configured rate limit for traffic classes. tc_tx_bw, pg and ratelimit are arrays where each index represents a TC. The…✨
• mlx4_SET_VPORT_QOS_get(9)Query QoS properties of a Vport. Each priority allowed for the Vport is assigned with a share of the BW, and a BW limitation. This commands query the current QoS values.✨
• mlx4_SET_VPORT_QOS_set(9)Set QoS properties of a Vport. QoS parameters can be modified at any time, but must be initialized before any QP is associated with the VPort.✨
• mlx5_cmd_cleanup_async_ctx(9)Clean up an async_ctx✨
• mlx5_cmd_do(9)Executes a fw command, wait for completion. Unlike mlx5_cmd_exec, this function will not translate or intercept outbox.status and will return -EREMOTEIO when outbox.status != MLX5_CMD_STAT_OK✨
• mlx5_cmd_exec(9)Executes a fw command, wait for completion✨
• mlx5_cmd_exec_polling(9)Executes a fw command, poll for completion Needed for driver force teardown, when command completion EQ will not be available to complete the command✨
• mlx5_ctrl_irq_release(9)release a ctrl IRQ back to the system.✨
• mlx5_ctrl_irq_request(9)request a ctrl IRQ for mlx5 device.✨
• mlx5_eq_disable(9)Disable EQ for receiving EQEs✨
• mlx5_eq_enable(9)Enable EQ for receiving EQEs✨
• mlx5_esw_get(9)Increase esw user count.✨
• mlx5_esw_hold(9)Try to take a read lock on esw mode lock.✨
• mlx5_esw_put(9)Decrease esw user count.✨
• mlx5_esw_query_functions(9)Returns raw output about functions state✨
• mlx5_esw_release(9)Release a read lock on esw mode lock.✨
• mlx5_esw_try_lock(9)Take a write lock on esw mode lock.✨
• mlx5_esw_unlock(9)Release write lock on esw mode lock✨
• mlx5_eswitch_enable(9)Enable eswitch✨
• mlx5_eswitch_enable_locked(9)Enable eswitch✨
• mlx5_eswitch_get_core_dev(9)Get the mdev device✨
• mlx5_eswitch_get_total_vports(9)Get total vports of the eswitch✨
• mlx5_fc_local_create(9)Allocate mlx5_fc struct for a counter which was already acquired using its counter id and bulk data.✨
• mlx5_fpga_get_sbu_caps(9)Read the SBU capabilities✨
• mlx5_fpga_mem_read(9)Read from FPGA memory address space✨
• mlx5_fpga_mem_write(9)Write to FPGA memory address space✨
• mlx5_fpga_sbu_conn_create(9)Initialize a new FPGA SBU connection✨
• mlx5_fpga_sbu_conn_destroy(9)Destroy an FPGA SBU connection✨
• mlx5_fpga_sbu_conn_sendmsg(9)Queue the transmission of a packet✨
• mlx5_get_default_msix_vec_count(9)Get the default number of MSI-X vectors to be assigned to each VF.✨
• mlx5_ib_get_counters_id(9)Returns counters id to use for device+port✨
• mlx5_ib_read_user_wqe_common(9)Copy a WQE (or part of) from user WQ to kernel buffer✨
• mlx5_irq_affinity_request(9)request an IRQ according to the given mask.✨
• mlx5_irq_release_vector(9)release one IRQ back to the system.✨
• mlx5_irq_request(9)request an IRQ for mlx5 PF/VF device.✨
• mlx5_irq_request_vector(9)request one IRQ for mlx5 device.✨
• mlx5_lag_set_port_affinity(9)✨
• mlx5_lag_shared_fdb_create(9)Create shared FDB LAG✨
• mlx5_set_msix_vec_count(9)Set dynamically allocated MSI-X on the VF✨
• mlx5_sriov_blocking_notifier_register(9)Register a VF notification block chain.✨
• mlx5_sriov_blocking_notifier_unregister(9)Unregister a VF from a notification block chain.✨
• mlx5_vf_get_core_dev(9)Get the mlx5 core device from a given VF PCI device if mlx5_core is its driver.✨
• mlx5_vf_put_core_dev(9)Put the mlx5 core device back.✨
• mlx5dr_buddy_alloc_mem(9)Update second level bitmap.✨
• mlx5dr_send_fill_and_append_ste_send_info(9)Add data to be sent with send_list parameters:✨
• mlx5dr_send_postsend_ste(9)write size bytes into offset from the hw cm.✨
• mlx5e_tc_act_get(9)Get an action parser for an action id.✨
• mlx5e_tc_act_init_parse_state(9)Init a new parse_state.✨
• mlx5hws_action_create_aso_meter(9)Create direct rule ASO flow meter action.✨
• mlx5hws_action_create_counter(9)Create direct rule counter action.✨
• mlx5hws_action_create_default_miss(9)Create a direct rule default miss action. Defaults are RX: Drop, TX: Wire.✨
• mlx5hws_action_create_dest_array(9)Create a dest array action, this action can duplicate packets and forward to multiple destinations in the destination list.✨
• mlx5hws_action_create_dest_drop(9)Create a direct rule drop action.✨
• mlx5hws_action_create_dest_match_range(9)Create direct rule range match action.✨
• mlx5hws_action_create_dest_table(9)Create direct rule goto table action.✨
• mlx5hws_action_create_dest_table_num(9)Create direct rule goto table number action.✨
• mlx5hws_action_create_dest_vport(9)Create direct rule goto vport action.✨
• mlx5hws_action_create_flow_sampler(9)Create direct rule flow sampler action.✨
• mlx5hws_action_create_insert_header(9)Create insert header action.✨
• mlx5hws_action_create_last(9)Create direct rule LAST action.✨
• mlx5hws_action_create_modify_header(9)Create direct rule modify header action.✨
• mlx5hws_action_create_pop_vlan(9)Create direct rule pop vlan action.✨
• mlx5hws_action_create_push_vlan(9)Create direct rule push vlan action.✨
• mlx5hws_action_create_reformat(9)Create direct rule reformat action.✨
• mlx5hws_action_create_remove_header(9)Create remove header action.✨
• mlx5hws_action_create_tag(9)Create direct rule TAG action.✨
• mlx5hws_action_destroy(9)Destroy direct rule action.✨
• mlx5hws_action_get_dev(9)Get mlx5 core device.✨
• mlx5hws_action_get_type(9)Get action type.✨
• mlx5hws_action_template_create(9)Create a new action template based on an action_type array.✨
• mlx5hws_action_template_destroy(9)Destroy action template.✨
• mlx5hws_bwc_matcher_create(9)Create a new BWC direct rule matcher.✨
• mlx5hws_bwc_matcher_destroy(9)Destroy BWC direct rule matcher.✨
• mlx5hws_bwc_rule_action_update(9)Update actions on an existing BWC rule.✨
• mlx5hws_bwc_rule_create(9)Create a new BWC rule.✨
• mlx5hws_bwc_rule_destroy(9)Destroy BWC direct rule.✨
• mlx5hws_context_close(9)Close a context used for direct hardware steering.✨
• mlx5hws_context_open(9)Open a context used for direct rule insertion using hardware steering.✨
• mlx5hws_context_set_peer(9)Set a peer context. Each context can have multiple contexts as peers.✨
• mlx5hws_debug_dump(9)Dump HWS info✨
• mlx5hws_is_supported(9)Check whether HWS is supported✨