📦 linux-manual

82568 pages · page 212 of 413

M (continued)

mlx5hws_match_template_create(9)Create a new match template based on items mask. The match template will be used for matcher creation.✨
mlx5hws_match_template_destroy(9)Destroy a match template.✨
mlx5hws_matcher_attach_at(9)Attach a new action template to a direct rule matcher.✨
mlx5hws_matcher_create(9)Create a new direct rule matcher.✨
mlx5hws_matcher_destroy(9)Destroy a direct rule matcher.✨
mlx5hws_matcher_resize_rule_move(9)Enqueue moving rule operation.✨
mlx5hws_matcher_resize_set_target(9)Link two matchers and enable moving rules.✨
mlx5hws_rule_action_update(9)Enqueue update actions on an existing rule.✨
mlx5hws_rule_create(9)Enqueue create rule operation.✨
mlx5hws_rule_destroy(9)Enqueue destroy rule operation.✨
mlx5hws_send_queue_action(9)Perform an action on the queue✨
mlx5hws_send_queue_poll(9)Poll queue for rule creation and deletions completions.✨
mlx5hws_table_create(9)Create a new direct rule table. Each table can contain multiple matchers.✨
mlx5hws_table_destroy(9)Destroy direct rule table.✨
mlx5hws_table_get_id(9)Get ID of the flow table.✨
mlx5hws_table_set_default_miss(9)Set default miss table for mlx5hws_table by using another mlx5hws_table. Traffic which all table matchers miss will be forwarded to miss table.✨
mlx5r_umr_dmabuf_update_pgsz(9)Safely update DMABUF MR page size and its entries accordingly✨
mlx5r_umr_revoke_mr(9)Fence all DMA on the MR✨
mlx90632_perform_measurement(9)Trigger and retrieve current measurement cycle✨
mlx90632_perform_measurement_burst(9)Trigger and retrieve current measurement cycle in step sleep mode✨
mlx90632_pm_interraction_wakeup(9)Measure time between user interactions to change powermode✨
mlx90632_reset_delay(9)Give the mlx90632 some time to reset properly If this is not done, the following I2C command(s) will not be accepted.✨
mlx90635_pm_interaction_wakeup(9)Measure time between user interactions to change powermode✨
mlx90635_reset_delay(9)Give the mlx90635 some time to reset properly If this is not done, the following I2C command(s) will not be accepted.✨
mm_account_fault(9)Do page fault accounting✨
mm_communicate(9)Adjust the communication buffer to StandAlonneMM and send it to TEE✨
mma9551_app_reset(9)reset application✨
mma9551_gpio_config(9)configure gpio✨
mma9551_read_accel_chan(9)read accelerometer channel✨
mma9551_read_accel_scale(9)read accelerometer scale✨
mma9551_read_config_byte(9)read 1 configuration byte✨
mma9551_read_config_word(9)read 1 config word✨
mma9551_read_config_words(9)read multiple config words✨
mma9551_read_status_byte(9)read 1 status byte✨
mma9551_read_status_word(9)read 1 status word✨
mma9551_read_status_words(9)read multiple status words✨
mma9551_read_version(9)read device version information✨
mma9551_set_device_state(9)sets HW power mode✨
mma9551_set_power_state(9)sets runtime PM state✨
mma9551_sleep(9)sleep✨
mma9551_update_config_bits(9)update bits in register✨
mma9551_write_config_byte(9)write 1 configuration byte✨
mma9551_write_config_word(9)write 1 config word✨
mma9551_write_config_words(9)write multiple config words✨
mmap_action_complete(9)Execute VMA descriptor action.✨
mmap_action_ioremap(9)helper for mmap_prepare hook to specify that a pure PFN I/O remap is required.✨
mmap_action_ioremap_full(9)helper for mmap_prepare hook to specify that the entirety of a VMA should be PFN I/O remapped.✨
mmap_action_map_kernel_pages(9)helper for mmap_prepare hook to specify that @num kernel pages contained in the @pages array should be mapped to userland starting at virtual address @start.✨
mmap_action_map_kernel_pages_full(9)helper for mmap_prepare hook to specify that kernel pages contained in the @pages array should be mapped to userland from @desc->start to @desc->end.✨
mmap_action_prepare(9)Perform preparatory setup for an VMA descriptor action which need to be performed.✨
mmap_action_remap(9)helper for mmap_prepare hook to specify that a pure PFN remap is required.✨
mmap_action_remap_full(9)helper for mmap_prepare hook to specify that the entirety of a VMA should be PFN remapped.✨
mmap_action_simple_ioremap(9)helper for mmap_prepare hook to specify that the physical range in [start_phys_addr, start_phys_addr + size) should be I/O remapped.✨
mmap_address_hint_valid(9)Validate the address hint of mmap✨
mmap_region(9)Actually perform the userland mapping of a VMA into current->mm with known, aligned and overflow-checked @addr and @len, and correctly determined VMA flags @vm_flags and page offset @pgoff.✨
mmb_sync(9)write out & wait upon all buffers in a list✨
mmc35240_raw_to_mgauss(9)convert raw readings to milli gauss. Also apply compensation for output value.✨
mmc_add_host(9)initialise host hardware✨
mmc_alloc_host(9)initialise the per-host structure.✨
mmc_attach_sd_uhs2(9)select UHS2 interface✨
mmc_claim_host(9)exclusively claim a host✨
mmc_cqe_post_req(9)CQE post process of a completed MMC request✨
mmc_cqe_request_done(9)CQE has finished processing an MMC request✨
mmc_detect_change(9)process change of state on a MMC socket✨
mmc_erase(9)erase sectors.✨
mmc_first_nonreserved_index(9)get the first index that is not reserved✨
mmc_free_host(9)free the host structure✨
mmc_gpiod_request_cd(9)request a gpio descriptor for card-detection✨
mmc_gpiod_request_ro(9)request a gpio descriptor for write protection✨
mmc_gpiod_set_cd_config(9)set config for card-detection GPIO✨
mmc_handle_undervoltage(9)Handle an undervoltage event on the MMC bus✨
mmc_hsq_finalize_request(9)finalize one request if the request is done✨
mmc_hw_reset(9)reset the card in hardware✨
mmc_init_queue(9)initialise a queue structure.✨
mmc_interrupt_hpi(9)Issue for High priority Interrupt✨
mmc_is_req_done(9)Determine if a 'cap_cmd_during_tfr' request is done✨
mmc_ocrbitnum_to_vdd(9)Convert a OCR bit number to its voltage✨
mmc_of_parse(9)parse host's device properties✨
mmc_of_parse_voltage(9)return mask of supported voltages✨
mmc_post_req(9)Post process a completed request✨
mmc_pre_req(9)Prepare for a new request✨
mmc_read_tuning(9)read data blocks from the mmc✨
mmc_register_driver(9)register a media driver✨
mmc_regulator_disable_vqmmc(9)disable VQMMC regulator for a host✨
mmc_regulator_enable_vqmmc(9)enable VQMMC regulator for a host✨
mmc_regulator_get_ocrmask(9)return mask of supported voltages✨
mmc_regulator_get_supply(9)try to get VMMC and VQMMC regulators for a host✨
mmc_regulator_register_undervoltage_notifier(9)Register for undervoltage events✨
mmc_regulator_set_ocr(9)set regulator to match host->ios voltage✨
mmc_regulator_set_vqmmc(9)Set VQMMC as per the ios✨
mmc_regulator_set_vqmmc2(9)Set vqmmc2 as per the ios->vqmmc2_voltage✨
mmc_regulator_unregister_undervoltage_notifier(9)Unregister undervoltage notifier✨
mmc_release_host(9)release a host✨
mmc_remove_host(9)remove host hardware✨
mmc_request_done(9)finish processing an MMC request✨
mmc_retune_disable(9)exit a transfer mode that requires retuning✨
mmc_retune_enable(9)enter a transfer mode that requires retuning✨
mmc_rpmb_ioctl(9)ioctl handler for the RPMB chardev✨
mmc_run_bkops(9)Run BKOPS for supported cards✨
mmc_set_data_timeout(9)set the timeout for a data command✨
mmc_unregister_driver(9)unregister a media driver✨
mmc_vdd_to_ocrbitnum(9)Convert a voltage to the OCR bit number✨
mmc_vddrange_to_ocrmask(9)Convert a voltage range to the OCR mask✨
mmc_wait_for_cmd(9)start a command and wait for completion✨
mmc_wait_for_req(9)start a request and wait for completion✨
mmd_eee_adv_to_ethtool_adv_t(9)✨
mmd_eee_cap_to_ethtool_sup_t(9)✨
mmget(9)Pin the address space associated with a &struct mm_struct.✨
mmgrab(9)Pin a &struct mm_struct.✨
mmhub_v1_0_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v1_7_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v1_8_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v2_0_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v2_3_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v3_0_1_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v3_0_2_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v3_0_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v3_3_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v4_1_0_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v4_2_0_set_fault_enable_default(9)update GART/VM fault handling✨
mmhub_v9_4_set_fault_enable_default(9)update GART/VM fault handling✨
MMIO HXG Message(9)✨
MMIO regions exposed to userspace.(9)✨
MMU backing pages(9)✨
MMU backing pages (constants)(9)✨
MMU Notifier(9)✨
mmu_get_page_table_base_index(9)Get the page table base index of MMU[ID]✨
mmu_interval_check_retry(9)Test if a collision has occurred✨
mmu_interval_notifier_insert(9)Insert an interval notifier✨
mmu_interval_notifier_remove(9)Remove a interval notifier✨
mmu_interval_read_begin(9)Begin a read side critical section against a VA range✨
mmu_interval_read_retry(9)End a read side critical section against a VA range✨
mmu_interval_set_seq(9)Save the invalidation sequence✨
mmu_invalidate_cache(9)nvalidate the page table cache of MMU[ID]✨
mmu_invalidate_cache_all(9)Invalidate the page table cache of all MMUs✨
mmu_notifier_get_locked(9)Return the single struct mmu_notifier for the mm & ops✨
mmu_notifier_put(9)Release the reference on the notifier✨
mmu_notifier_register(9)Register a notifier on a mm✨
mmu_notifier_synchronize(9)Ensure all mmu_notifiers are freed✨
mmu_reg_load(9)Read from a control register of MMU[ID]✨
mmu_reg_store(9)Write to a control register of MMU[ID]✨
mmu_set_page_table_base_index(9)Set the page table base index of MMU[ID]✨
mnt_allow_writers(9)check whether the attribute change allows writers✨
mnt_drop_write(9)give up write access to a mount✨
mnt_get_write_access(9)get write access to a mount without freeze protection✨
mnt_get_write_access_file(9)get write access to a file's mount✨
mnt_hold_writers(9)prevent write access to the given mount✨
mnt_idmap_get(9)get a reference to an idmapping✨
mnt_idmap_put(9)put a reference to an idmapping✨
mnt_put_write_access(9)give up write access to a mount✨
mnt_set_expiry(9)Put a mount on an expiration list✨
mnt_unhold_writers(9)stop preventing write access to the given mount✨
mnt_want_write(9)get write access to a mount✨
mnt_want_write_file(9)get write access to a file's mount✨
mock_drm_getfile(9)Create a new struct file for the drm device✨
mod_build_hf_vsif_infopacket(9)Prepare HDMI Vendor Specific info frame. Follows HDMI Spec to build up Vendor Specific info frame✨
mod_check_sig(9)check that the given signature is sane✨
mod_delayed_work(9)modify delay of or queue a delayed work✨
mod_delayed_work_on(9)modify delay of or queue a delayed work on specific CPU✨
mod_lruvec_state(9)update lruvec memory statistics✨
mod_memcg_state(9)update cgroup memory statistics✨
mod_power_calc_psr_configs(9)calculate/update generic psr configuration fields.✨
mod_timer(9)Modify a timer's timeout✨
mod_timer_pending(9)Modify a pending timer's timeout✨
mode_selection_work_fn(9)Alternate mode activation task✨
mode_strip_sgid(9)handle the sgid bit for non-directories✨
mode_strip_umask(9)handle vfs umask stripping✨
modecpy(9)Prepare response for MODE SENSE✨
modepin_gpio_dir_in(9)Set the direction of the specified GPIO pin as input✨
modepin_gpio_dir_out(9)Set the direction of the specified GPIO pin as output✨
modepin_gpio_get_value(9)Get the state of the specified pin of GPIO device✨
modepin_gpio_probe(9)Initialization method for modepin_gpio✨
modepin_gpio_set_value(9)Modify the state of the pin with specified value✨
modeset (int)(9)✨
modify_device_id(9)Modifies the device ID of the Boot BIOS image✨
modify_for_partial_write(9)Do the modify-write part of a read-modify- write cycle.✨
modify_ftrace_direct(9)Modify an existing direct 'multi' call to call something else✨
modify_ftrace_direct_nolock(9)Modify an existing direct 'multi' call to call something else✨
modify_prot_commit_ptes(9)Commit an update to a batch of ptes, leaving any hardware-controlled bits in the PTE unmodified.✨
modify_prot_start_ptes(9)Start a pte protection read-modify-write transaction over a batch of ptes, which protects against asynchronous hardware modifications to the ptes. The intention is not to prevent the hardware from…✨
modify_user_hw_breakpoint(9)modify a user-space hardware breakpoint✨
module debugging statistics overview(9)✨
module statistics debugfs counters(9)✨
module_alias_printf(9)add auto-generated MODULE_ALIAS()✨
module_apr_driver(9)Helper macro for registering a aprbus driver✨
module_auxiliary_driver(9)Helper macro for registering an auxiliary driver✨
module_comedi_driver(9)Helper macro for registering a comedi driver✨
module_comedi_pci_driver(9)Helper macro for registering a comedi PCI driver✨
module_comedi_pcmcia_driver(9)Helper macro for registering a comedi PCMCIA driver✨
module_comedi_usb_driver(9)Helper macro for registering a comedi USB driver✨
module_dm(9)Helper macro for DM targets that don't do anything special in their module_init and module_exit. Each module may only use this macro once, and calling it replaces module_init() and module_exit().✨
module_driver(9)Helper macro for drivers that don't do anything special in module init/exit. This eliminates a lot of boilerplate. Each module may only use this macro once, and calling it replaces module_init()…✨
module_dsa_tag_driver(9)Helper macro for registering a single DSA tag driver✨
module_dsa_tag_drivers(9)Helper macro for registering DSA tag drivers✨
module_dwarf_cleanup(9)remove FDE/CIEs associated with @mod✨
module_exit(9)driver exit entry point✨
module_ffa_driver(9)Helper macro for registering a psa_ffa driver✨
module_gameport_driver(9)Helper macro for registering a gameport driver✨
module_gbphy_driver(9)Helper macro for registering a gbphy driver✨
module_greybus_driver(9)Helper macro for registering a Greybus driver✨