ath5k_setup_rate_powertable(9)

💖 ath5k_setup_rate_powertable(9) 💖

okay bestie, this is the Kernel API Manual page for ath5k_setup_rate_powertable(9), and it is literally here to “Set up rate power table for a given tx power” ✨ no extra lore, just the facts with main-character sparkle 💅

🌸 NAME 🌸

ath5k_setup_rate_powertable — set up rate power table for a given tx power.

📡 SYNOPSIS 📡

void ath5k_setup_rate_powertable (struct ath5k_hw *ah , u16 max_pwr , struct ath5k_rate_pcal_info *rate_info , u8 ee_mode );

🎀 ARGUMENTS 🎀

• ah — the struct ath5k_hw.
• max_pwr — the maximum tx power requested in 0.5dB steps.
• rate_info — the struct ath5k_rate_pcal_info to fill.
• ee_mode — one of enum ath5k_driver_mode.

🦋 SEE ALSO 🦋

Kernel file ./drivers/net/wireless/ath/ath5k/phy.c — plus the whole bestie list:

• PHY related functions(9)
• ath5k_hw_radio_revision(9)
• ath5k_channel_ok(9)
• ath5k_hw_chan_has_spur_noise(9)
• ath5k_hw_rfb_op(9)
• ath5k_hw_write_ofdm_timings(9)
• ath5k_hw_phy_disable(9)
• ath5k_hw_wait_for_synth(9)
• RF Gain optimization(9)
• ath5k_hw_rfgain_opt_init(9)
• ath5k_hw_request_rfgain_probe(9)
• ath5k_hw_rf_gainf_corr(9)
• ath5k_hw_rf_check_gainf_readback(9)
• ath5k_hw_rf_gainf_adjust(9)
• ath5k_hw_gainf_calibrate(9)
• ath5k_hw_rfgain_init(9)
• ath5k_hw_rfregs_init(9)
• ath5k_hw_rf5110_chan2athchan(9)
• ath5k_hw_rf5110_channel(9)
• ath5k_hw_rf5111_chan2athchan(9)
• ath5k_hw_rf5111_channel(9)
• ath5k_hw_rf5112_channel(9)
• ath5k_hw_rf2425_channel(9)
• ath5k_hw_channel(9)
• PHY Calibration routines(9)
• ath5k_hw_read_measured_noise_floor(9)
• ath5k_hw_init_nfcal_hist(9)
• ath5k_hw_update_nfcal_hist(9)
• ath5k_hw_get_median_noise_floor(9)
• ath5k_hw_update_noise_floor(9)
• ath5k_hw_rf5110_calibrate(9)
• ath5k_hw_rf511x_iq_calibrate(9)
• ath5k_hw_phy_calibrate(9)
• ath5k_hw_set_spur_mitigation_filter(9)
• Antenna control(9)
• ath5k_hw_set_def_antenna(9)
• ath5k_hw_set_fast_div(9)
• ath5k_hw_set_antenna_switch(9)
• ath5k_hw_set_antenna_mode(9)
• ath5k_get_interpolated_value(9)
• ath5k_get_linear_pcdac_min(9)
• ath5k_create_power_curve(9)
• ath5k_get_chan_pcal_surrounding_piers(9)
• ath5k_get_rate_pcal_data(9)
• ath5k_get_max_ctl_power(9)
• Power to PCDAC table functions(9)
• ath5k_fill_pwr_to_pcdac_table(9)
• ath5k_combine_linear_pcdac_curves(9)
• ath5k_write_pcdac_table(9)
• Power to PDADC table functions(9)
• ath5k_combine_pwr_to_pdadc_curves(9)
• ath5k_write_pwr_to_pdadc_table(9)
• ath5k_setup_channel_powertable(9)
• ath5k_write_channel_powertable(9)
• Per-rate tx power setting(9)
• ath5k_hw_txpower(9)
• ath5k_hw_set_txpower_limit(9)
• ath5k_hw_phy_init(9)

mwah 💋 that’s the whole page, bestie. the footer details are: source/version ./drivers/net/wireless/ath/ath5k, date October 2026, and the manual is ath5k_setup_rate_powertable(9). byeee, go set up that rate power table 🫶✨