ath5k_hw_gainf_calibrate(9)

🎀 ath5k_hw_gainf_calibrate(9) — Kernel API Manual 🎀

okay bestie, this is the Kernel API Manual page for ath5k_hw_gainf_calibrate(9), and we are gonna get you comfy with it 💅✨

---

✨ NAME ✨

ath5k_hw_gainf_calibrate — Do a gain_F calibration 💖

---

🌸 SYNOPSIS 🌸

enum ath5k_rfgain ath5k_hw_gainf_calibrate (struct ath5k_hw *ah );

---

🦋 ARGUMENTS 🦋

• ah — the struct ath5k_hw, obviously. That's the whole argument list, no cap 🫶

---

💖 DESCRIPTION 💖

so this function is the main callback for thermal RF gain calibration engine — literally main character energy for that little calibration situation 🌈

It checks for a new gain reading and schedules an adjustment if needed. Then it returns one of enum ath5k_rfgain codes, periodt 💅

bestie, that's the whole description in the original too — no extra lore, no invented side quests 🌸

---

🌈 SEE ALSO 🌈

okay the cross-reference list is long and iconic, so here it is in full, every single one 👑

• Kernel file — ./drivers/net/wireless/ath/ath5k/phy.c
• PHY related functions(9)
• ath5k_hw_radio_revision(9)
• ath5k_channel_ok(9)
• ath5k_hw_chan_has_spur_noise(9)
• ath5k_hw_rfb_op(9)
• ath5k_hw_write_ofdm_timings(9)
• ath5k_hw_phy_disable(9)
• ath5k_hw_wait_for_synth(9)
• RF Gain optimization(9)
• ath5k_hw_rfgain_opt_init(9)
• ath5k_hw_request_rfgain_probe(9)
• ath5k_hw_rf_gainf_corr(9)
• ath5k_hw_rf_check_gainf_readback(9)
• ath5k_hw_rf_gainf_adjust(9)
• ath5k_hw_rfgain_init(9)
• ath5k_hw_rfregs_init(9)
• ath5k_hw_rf5110_chan2athchan(9)
• ath5k_hw_rf5110_channel(9)
• ath5k_hw_rf5111_chan2athchan(9)
• ath5k_hw_rf5111_channel(9)
• ath5k_hw_rf5112_channel(9)
• ath5k_hw_rf2425_channel(9)
• ath5k_hw_channel(9)
• PHY Calibration routines(9)
• ath5k_hw_read_measured_noise_floor(9)
• ath5k_hw_init_nfcal_hist(9)
• ath5k_hw_update_nfcal_hist(9)
• ath5k_hw_get_median_noise_floor(9)
• ath5k_hw_update_noise_floor(9)
• ath5k_hw_rf5110_calibrate(9)
• ath5k_hw_rf511x_iq_calibrate(9)
• ath5k_hw_phy_calibrate(9)
• ath5k_hw_set_spur_mitigation_filter(9)
• Antenna control(9)
• ath5k_hw_set_def_antenna(9)
• ath5k_hw_set_fast_div(9)
• ath5k_hw_set_antenna_switch(9)
• ath5k_hw_set_antenna_mode(9)
• ath5k_get_interpolated_value(9)
• ath5k_get_linear_pcdac_min(9)
• ath5k_create_power_curve(9)
• ath5k_get_chan_pcal_surrounding_piers(9)
• ath5k_get_rate_pcal_data(9)
• ath5k_get_max_ctl_power(9)
• Power to PCDAC table functions(9)
• ath5k_fill_pwr_to_pcdac_table(9)
• ath5k_combine_linear_pcdac_curves(9)
• ath5k_write_pcdac_table(9)
• Power to PDADC table functions(9)
• ath5k_combine_pwr_to_pdadc_curves(9)
• ath5k_write_pwr_to_pdadc_table(9)
• ath5k_setup_channel_powertable(9)
• ath5k_write_channel_powertable(9)
• Per-rate tx power setting(9)
• ath5k_setup_rate_powertable(9)
• ath5k_hw_txpower(9)
• ath5k_hw_set_txpower_limit(9)
• ath5k_hw_phy_init(9)

---

and that's the whole page, bestie 🫶 shoutout to the source/version ./drivers/net/wireless/ath/ath5k and the date October 2026 — ath5k_hw_gainf_calibrate(9) out 💋✨