ath5k_write_..._pdadc_table(9)
π ath5k_write_..._pdadc_table β from the Kernel API Manual, bestie β¨
okay so picture this: you're deep in the kernel, specifically the ath5k wireless driver, and you need to write the PDADC values onto the hardware. that's it. that's the whole function. and honestly? iconic. π
π NAME π
ath5k_write_pwr_to_pdadc_table β write the PDADC values on hw π«Ά
like literally, it takes your power table and shoves those PDADC values onto the hardware. no cap, that's the vibe. β¨
β SYNOPSIS β
void ath5k_write_pwr_to_pdadc_table (struct ath5k_hw *ah , u8 ee_mode );
returns void, so likeβ¦ it doesn't hand you anything back. it just does the thing. main character energy fr fr. π
π¦ ARGUMENTS π¦
ahβ thestruct ath5k_hw, aka your hardware context, the whole entire moment. your fave struct. πee_modeβ one ofenum ath5k_driver_mode. pick your mode, bestie, that's the whole assignment. πΈ
π SEE ALSO π
okay so this function has so many friends, it's giving group chat with 50 unread messages π β here's the full squad, in order, no gatekeeping:
- Kernel file
./drivers/net/wireless/ath/ath5k/phy.cPHY related functions(9) ath5k_hw_radio_revision(9)ath5k_channel_ok(9)ath5k_hw_chan_has_spur_noise(9)ath5k_hw_rfb_op(9)ath5k_hw_write_ofdm_timings(9)ath5k_hw_phy_disable(9)ath5k_hw_wait_for_synth(9)- RF Gain optimization(9)
ath5k_hw_rfgain_opt_init(9)ath5k_hw_request_rfgain_probe(9)ath5k_hw_rf_gainf_corr(9)ath5k_hw_rf_check_gainf_readback(9)ath5k_hw_rf_gainf_adjust(9)ath5k_hw_gainf_calibrate(9)ath5k_hw_rfgain_init(9)ath5k_hw_rfregs_init(9)ath5k_hw_rf5110_chan2athchan(9)ath5k_hw_rf5110_channel(9)ath5k_hw_rf5111_chan2athchan(9)ath5k_hw_rf5111_channel(9)ath5k_hw_rf5112_channel(9)ath5k_hw_rf2425_channel(9)ath5k_hw_channel(9)- PHY Calibration routines(9)
ath5k_hw_read_measured_noise_floor(9)ath5k_hw_init_nfcal_hist(9)ath5k_hw_update_nfcal_hist(9)ath5k_hw_get_median_noise_floor(9)ath5k_hw_update_noise_floor(9)ath5k_hw_rf5110_calibrate(9)ath5k_hw_rf511x_iq_calibrate(9)ath5k_hw_phy_calibrate(9)ath5k_hw_set_spur_mitigation_filter(9)- Antenna control(9)
ath5k_hw_set_def_antenna(9)ath5k_hw_set_fast_div(9)ath5k_hw_set_antenna_switch(9)ath5k_hw_set_antenna_mode(9)ath5k_get_interpolated_value(9)ath5k_get_linear_pcdac_min(9)ath5k_create_power_curve(9)ath5k_get_chan_pcal_surrounding_piers(9)ath5k_get_rate_pcal_data(9)ath5k_get_max_ctl_power(9)- Power to PCDAC table functions(9)
ath5k_fill_pwr_to_pcdac_table(9)ath5k_combine_linear_pcdac_curves(9)ath5k_write_pcdac_table(9)- Power to PDADC table functions(9)
ath5k_combine_pwr_to_pdadc_curves(9)ath5k_setup_channel_powertable(9)ath5k_write_channel_powertable(9)- Per-rate tx power setting(9)
ath5k_setup_rate_powertable(9)ath5k_hw_txpower(9)ath5k_hw_set_txpower_limit(9)ath5k_hw_phy_init(9)
iykyk πβ¨
and that's the whole page, bestie π ngl it's a short one but it ate. this lil gem lives in ./drivers/net/wireless/ath/ath5k, dated October 2026 β go read the source, slay, and remember: write those PDADC values on hw ππ¦πΈ
π¦ where this page comes from
- nixpkgs unstable: linux-manual 7.3.1
- π girlified by deepseek-ai/DeepSeek-V4.1-Flash-1017 on : a language model's rewrite of the original, under its terms