ath5k_hw_se...ation_filter(9)
π ath5k_hw_set_spur_mitigation_filter β from the Kernel API Manual, bestie
okay so first thing you need to know: this page lives in the Kernel API Manual, and it's all about ath5k_hw_set_spur_mitigation_filter β¨ β a lil function with a big name that does exactly one thing really well. let's get into it π
β¨ NAME β¨
ath5k_hw_set_spur_mitigation_filter β Configure SPUR filter π¦
like, that's it. that's the whole job. but trust, the lore is juicier than it sounds, keep reading π
πΈ SYNOPSIS πΈ
void ath5k_hw_set_spur_mitigation_filter (struct ath5k_hw *ah , struct
ieee80211_channel *channel );
no return value, no drama β it's a void girlie π
she just does the work and dips.
π«Ά ARGUMENTS π«Ά
ahβ Thestruct ath5k_hw. this is the main character of the ath5k universe, the hardware handle, the whole vibe πchannelβ Thestruct ieee80211_channel. this is the channel she's out here tuning for, iykyk π
π₯ DESCRIPTION π₯
so here's the tea, bestie: this function gets called during PHY initialization to configure the spur filter for the given channel. that's the whole assignment, and she ate, periodt β¨
and what even is a spur? ok so β spur is noise generated due to "reflection" effects. literally the universe being messy and bouncing signals around where they shouldn't be π not me getting emotional about radio physics.
if you want the full lore on this method, the page says to check out patent US7643810 β yes, a real patent, go read it, it's giving research era π§
ngl this one's short but she's important β no spur filter, no clean signal, and then everything downstream is a mess π
π SEE ALSO π
okay this is the part where the page goes absolutely feral with cross-references, and I promised to keep every single one, so buckle up π slay:
- Kernel file
./drivers/net/wireless/ath/ath5k/phy.c - PHY related functions(9)
ath5k_hw_radio_revision(9)ath5k_channel_ok(9)ath5k_hw_chan_has_spur_noise(9)ath5k_hw_rfb_op(9)ath5k_hw_write_ofdm_timings(9)ath5k_hw_phy_disable(9)ath5k_hw_wait_for_synth(9)- RF Gain optimization(9)
ath5k_hw_rfgain_opt_init(9)ath5k_hw_request_rfgain_probe(9)ath5k_hw_rf_gainf_corr(9)ath5k_hw_rf_check_gainf_readback(9)ath5k_hw_rf_gainf_adjust(9)ath5k_hw_gainf_calibrate(9)ath5k_hw_rfgain_init(9)ath5k_hw_rfregs_init(9)ath5k_hw_rf5110_chan2athchan(9)ath5k_hw_rf5110_channel(9)ath5k_hw_rf5111_chan2athchan(9)ath5k_hw_rf5111_channel(9)ath5k_hw_rf5112_channel(9)ath5k_hw_rf2425_channel(9)ath5k_hw_channel(9)- PHY Calibration routines(9)
ath5k_hw_read_measured_noise_floor(9)ath5k_hw_init_nfcal_hist(9)ath5k_hw_update_nfcal_hist(9)ath5k_hw_get_median_noise_floor(9)ath5k_hw_update_noise_floor(9)ath5k_hw_rf5110_calibrate(9)ath5k_hw_rf511x_iq_calibrate(9)ath5k_hw_phy_calibrate(9)- Antenna control(9)
ath5k_hw_set_def_antenna(9)ath5k_hw_set_fast_div(9)ath5k_hw_set_antenna_switch(9)ath5k_hw_set_antenna_mode(9)ath5k_get_interpolated_value(9)ath5k_get_linear_pcdac_min(9)ath5k_create_power_curve(9)ath5k_get_chan_pcal_surrounding_piers(9)ath5k_get_rate_pcal_data(9)ath5k_get_max_ctl_power(9)- Power to PCDAC table functions(9)
ath5k_fill_pwr_to_pcdac_table(9)ath5k_combine_linear_pcdac_curves(9)ath5k_write_pcdac_table(9)- Power to PDADC table functions(9)
ath5k_combine_pwr_to_pdadc_curves(9)ath5k_write_pwr_to_pdadc_table(9)ath5k_setup_channel_powertable(9)ath5k_write_channel_powertable(9)- Per-rate tx power setting(9)
ath5k_setup_rate_powertable(9)ath5k_hw_txpower(9)ath5k_hw_set_txpower_limit(9)ath5k_hw_phy_init(9)
like I said. feral. every last one of them, preserved, no notes πβ¨
okay and finally, the cute lil sign-off β this page comes from ./drivers/net/wireless/ath/ath5k, dated October 2026, and the manual page itself is ath5k_hw_se...ation_filter(9) π go forth and mitigate those spurs, bestie, you're gonna slay πΈπ¦π
π¦ where this page comes from
- nixpkgs unstable: linux-manual 7.3.1
- π girlified by deepseek-ai/DeepSeek-V4.1-Flash-1017 on : a language model's rewrite of the original, under its terms