ath5k_hw_rf5110_calibrate(9)

✨ NAME ✨

Okay bestie, say hi to ath5k_hw_rf5110_calibrate(9) from the Kernel API Manual 💖 — the function that does a PHY calibration on RF5110. Literally its whole thing. Iconic behavior.

🎀 SYNOPSIS 🎀

int ath5k_hw_rf5110_calibrate (struct ath5k_hw *ah , struct ieee80211_channel *channel );

🌸 ARGUMENTS 🌸

• ah — The struct ath5k_hw. That's the hardware vibe.
• channel — The struct ieee80211_channel. The channel in question, periodt.

🦋 DESCRIPTION 🦋

Do a complete PHY calibration (AGC + NF + I/Q) on RF5110. Yup, the full glow-up: AGC, NF, and I/Q all get their moment. No skipping steps, no half-done slay 💅.

🔥 SEE ALSO 🔥

The whole friend group showed up, ngl. Every single one:

• Kernel file ./drivers/net/wireless/ath/ath5k/phy.c — PHY related functions(9)
• ath5k_hw_radio_revision(9)
• ath5k_channel_ok(9)
• ath5k_hw_chan_has_spur_noise(9)
• ath5k_hw_rfb_op(9)
• ath5k_hw_write_ofdm_timings(9)
• ath5k_hw_phy_disable(9)
• ath5k_hw_wait_for_synth(9)
• RF Gain optimization(9)
• ath5k_hw_rfgain_opt_init(9)
• ath5k_hw_request_rfgain_probe(9)
• ath5k_hw_rf_gainf_corr(9)
• ath5k_hw_rf_check_gainf_readback(9)
• ath5k_hw_rf_gainf_adjust(9)
• ath5k_hw_gainf_calibrate(9)
• ath5k_hw_rfgain_init(9)
• ath5k_hw_rfregs_init(9)
• ath5k_hw_rf5110_chan2athchan(9)
• ath5k_hw_rf5110_channel(9)
• ath5k_hw_rf5111_chan2athchan(9)
• ath5k_hw_rf5111_channel(9)
• ath5k_hw_rf5112_channel(9)
• ath5k_hw_rf2425_channel(9)
• ath5k_hw_channel(9)
• PHY Calibration routines(9)
• ath5k_hw_read_measured_noise_floor(9)
• ath5k_hw_init_nfcal_hist(9)
• ath5k_hw_update_nfcal_hist(9)
• ath5k_hw_get_median_noise_floor(9)
• ath5k_hw_update_noise_floor(9)
• ath5k_hw_rf511x_iq_calibrate(9)
• ath5k_hw_phy_calibrate(9)
• ath5k_hw_set_spur_mitigation_filter(9)
• Antenna control(9)
• ath5k_hw_set_def_antenna(9)
• ath5k_hw_set_fast_div(9)
• ath5k_hw_set_antenna_switch(9)
• ath5k_hw_set_antenna_mode(9)
• ath5k_get_interpolated_value(9)
• ath5k_get_linear_pcdac_min(9)
• ath5k_create_power_curve(9)
• ath5k_get_chan_pcal_surrounding_piers(9)
• ath5k_get_rate_pcal_data(9)
• ath5k_get_max_ctl_power(9)
• Power to PCDAC table functions(9)
• ath5k_fill_pwr_to_pcdac_table(9)
• ath5k_combine_linear_pcdac_curves(9)
• ath5k_write_pcdac_table(9)
• Power to PDADC table functions(9)
• ath5k_combine_pwr_to_pdadc_curves(9)
• ath5k_write_pwr_to_pdadc_table(9)
• ath5k_setup_channel_powertable(9)
• ath5k_write_channel_powertable(9)
• Per-rate tx power setting(9)
• ath5k_setup_rate_powertable(9)
• ath5k_hw_txpower(9)
• ath5k_hw_set_txpower_limit(9)
• ath5k_hw_phy_init(9)

That’s the whole page, bestie 🫶 — brought to you by ./drivers/net/wireless/ath/ath5k, dated October 2026, and yes, it’s still out here serving ath5k_hw_rf5110_calibrate(9) in the Kernel API Manual. Slay 💖✨