ath5k_hw_rfb_op(9)

💖 NAME 💖

hey bestie, this is ath5k_hw_rfb_op(9) from the Kernel API Manual — and the name is literally ath5k_hw_rfb_op: Perform an operation on the given RF Buffer. 💅✨

✨ SYNOPSIS ✨

okay so the signature is literally this, and it slays, no cap:

unsigned int ath5k_hw_rfb_op (struct ath5k_hw *ah , const struct ath5k_rf_reg *rf_regs , u32 val , u8 reg_id , bool set );

🎀 ARGUMENTS 🎀

these are the besties this function takes:

• ah — the struct ath5k_hw. 🫶
• rf_regs — the struct ath5k_rf_reg. 🎀
• val — new value. ⭐
• reg_id — RF register ID. 🔥
• set — this one indicates we need to swap data. 💀

🦋 DESCRIPTION 🦋

okay so real talk: this is an internal function, and it’s used to modify RF Banks before writing them to AR5K_RF_BUFFER. if you want more infos, check out rfbuffer.h. 😭✨

🌈 SEE ALSO 🌈

the whole linked-up squad, no cap — all of these are from the original SEE ALSO:

• Kernel file ./drivers/net/wireless/ath/ath5k/phy.c PHY related functions(9)
• ath5k_hw_radio_revision(9)
• ath5k_channel_ok(9)
• ath5k_hw_chan_has_spur_noise(9)
• ath5k_hw_write_ofdm_timings(9)
• ath5k_hw_phy_disable(9)
• ath5k_hw_wait_for_synth(9)
• RF Gain optimization(9)
• ath5k_hw_rfgain_opt_init(9)
• ath5k_hw_request_rfgain_probe(9)
• ath5k_hw_rf_gainf_corr(9)
• ath5k_hw_rf_check_gainf_readback(9)
• ath5k_hw_rf_gainf_adjust(9)
• ath5k_hw_gainf_calibrate(9)
• ath5k_hw_rfgain_init(9)
• ath5k_hw_rfregs_init(9)
• ath5k_hw_rf5110_chan2athchan(9)
• ath5k_hw_rf5110_channel(9)
• ath5k_hw_rf5111_chan2athchan(9)
• ath5k_hw_rf5111_channel(9)
• ath5k_hw_rf5112_channel(9)
• ath5k_hw_rf2425_channel(9)
• ath5k_hw_channel(9)
• PHY Calibration routines(9)
• ath5k_hw_read_measured_noise_floor(9)
• ath5k_hw_init_nfcal_hist(9)
• ath5k_hw_update_nfcal_hist(9)
• ath5k_hw_get_median_noise_floor(9)
• ath5k_hw_update_noise_floor(9)
• ath5k_hw_rf5110_calibrate(9)
• ath5k_hw_rf511x_iq_calibrate(9)
• ath5k_hw_phy_calibrate(9)
• ath5k_hw_set_spur_mitigation_filter(9)
• Antenna control(9)
• ath5k_hw_set_def_antenna(9)
• ath5k_hw_set_fast_div(9)
• ath5k_hw_set_antenna_switch(9)
• ath5k_hw_set_antenna_mode(9)
• ath5k_get_interpolated_value(9)
• ath5k_get_linear_pcdac_min(9)
• ath5k_create_power_curve(9)
• ath5k_get_chan_pcal_surrounding_piers(9)
• ath5k_get_rate_pcal_data(9)
• ath5k_get_max_ctl_power(9)
• Power to PCDAC table functions(9)
• ath5k_fill_pwr_to_pcdac_table(9)
• ath5k_combine_linear_pcdac_curves(9)
• ath5k_write_pcdac_table(9)
• Power to PDADC table functions(9)
• ath5k_combine_pwr_to_pdadc_curves(9)
• ath5k_write_pwr_to_pdadc_table(9)
• ath5k_setup_channel_powertable(9)
• ath5k_write_channel_powertable(9)
• Per-rate tx power setting(9)
• ath5k_setup_rate_powertable(9)
• ath5k_hw_txpower(9)
• ath5k_hw_set_txpower_limit(9)
• ath5k_hw_phy_init(9)

mwah 💋 — source/version: ./drivers/net/wireless/ath/ath5k, date: October 2026. 💖