ath5k_hw_ge..._noise_floor(9)

🌸 NAME 🌸

ath5k_hw_get_median_noise_floor — bestie, this is the one that grabs the median NF out of the history buffer 💅

So like, ath5k_hw_get_median_noise_floor = get median noise floor, and yes it's pulling that median NF straight out of the history buffer. That's the whole vibe. Slay.

✨ SYNOPSIS ✨

s16 ath5k_hw_get_median_noise_floor (struct ath5k_hw *ah );

It hands you back an s16, and it takes exactly one (1) arg. Very demure, very mindful.

🎀 ARGUMENTS 🎀

• ah — the struct ath5k_hw, aka the main character of this whole function. That's it, that's the argument. 🫶

🦋 SEE ALSO 🦋

Okay so this list is long long, but every single one of these is iconic in its own right, so we're listing them all, no skips, no cap 👑

• Kernel file ./drivers/net/wireless/ath/ath5k/phy.c — PHY related functions(9)
• ath5k_hw_radio_revision(9)
• ath5k_channel_ok(9)
• ath5k_hw_chan_has_spur_noise(9)
• ath5k_hw_rfb_op(9)
• ath5k_hw_write_ofdm_timings(9)
• ath5k_hw_phy_disable(9)
• ath5k_hw_wait_for_synth(9)
• RF Gain optimization(9)
• ath5k_hw_rfgain_opt_init(9)
• ath5k_hw_request_rfgain_probe(9)
• ath5k_hw_rf_gainf_corr(9)
• ath5k_hw_rf_check_gainf_readback(9)
• ath5k_hw_rf_gainf_adjust(9)
• ath5k_hw_gainf_calibrate(9)
• ath5k_hw_rfgain_init(9)
• ath5k_hw_rfregs_init(9)
• ath5k_hw_rf5110_chan2athchan(9)
• ath5k_hw_rf5110_channel(9)
• ath5k_hw_rf5111_chan2athchan(9)
• ath5k_hw_rf5111_channel(9)
• ath5k_hw_rf5112_channel(9)
• ath5k_hw_rf2425_channel(9)
• ath5k_hw_channel(9)
• PHY Calibration routines(9)
• ath5k_hw_read_measured_noise_floor(9)
• ath5k_hw_init_nfcal_hist(9)
• ath5k_hw_update_nfcal_hist(9)
• ath5k_hw_update_noise_floor(9)
• ath5k_hw_rf5110_calibrate(9)
• ath5k_hw_rf511x_iq_calibrate(9)
• ath5k_hw_phy_calibrate(9)
• ath5k_hw_set_spur_mitigation_filter(9)
• Antenna control(9)
• ath5k_hw_set_def_antenna(9)
• ath5k_hw_set_fast_div(9)
• ath5k_hw_set_antenna_switch(9)
• ath5k_hw_set_antenna_mode(9)
• ath5k_get_interpolated_value(9)
• ath5k_get_linear_pcdac_min(9)
• ath5k_create_power_curve(9)
• ath5k_get_chan_pcal_surrounding_piers(9)
• ath5k_get_rate_pcal_data(9)
• ath5k_get_max_ctl_power(9)
• Power to PCDAC table functions(9)
• ath5k_fill_pwr_to_pcdac_table(9)
• ath5k_combine_linear_pcdac_curves(9)
• ath5k_write_pcdac_table(9)
• Power to PDADC table functions(9)
• ath5k_combine_pwr_to_pdadc_curves(9)
• ath5k_write_pwr_to_pdadc_table(9)
• ath5k_setup_channel_powertable(9)
• ath5k_write_channel_powertable(9)
• Per-rate tx power setting(9)
• ath5k_setup_rate_powertable(9)
• ath5k_hw_txpower(9)
• ath5k_hw_set_txpower_limit(9)
• ath5k_hw_phy_init(9)

Okurrr that's the whole page, bestie — nothing skipped, nothing merged, every reference exactly where it belongs 💖

And for the cute sign-off: this little beauty lives in ./drivers/net/wireless/ath/ath5k, the source/version-date situation is October 2026, and the page itself answers to ath5k_hw_ge..._noise_floor(9) — yes the title got truncated with a ..., and no we're not fixing it, it's part of the lore ✨🧚