📦 linux-manual

C (continued)

• commit_minimal_transition_state_in_dc_update(9)Commit a minimal state based on current or new context✨
• commit_orphans(9)commit orphans.✨
• commit_tail(9)Commit the tail block of the slab journal.✨
• Common Primary Timing Generator (CMTG)(9)✨
• common_lsm_audit(9)generic LSM auditing function✨
• common_perm(9)basic common permission check wrapper fn for paths✨
• common_perm_cond(9)common permission wrapper around inode cond✨
• common_perm_create(9)common permission wrapper for operations doing create✨
• common_perm_dir_dentry(9)common permission wrapper when path is dir, dentry✨
• common_perm_rm(9)common permission wrapper for operations doing rm✨
• common_threshold_handler(9)handle latency threshold overflow✨
• comp_close(9)implements the syscall to close the device✨
• comp_disconnect_channel(9)disconnect a channel✨
• comp_open(9)implements the syscall to open the device✨
• comp_probe(9)probe function of the driver module✨
• comp_read(9)implements the syscall to read from the device✨
• comp_rx_completion(9)completion handler for rx channels✨
• comp_tx_completion(9)completion handler for tx channels✨
• comp_write(9)implements the syscall to write to the device✨
• compare_css_sets(9)helper function for find_existing_css_set().✨
• compare_dents(9)compare directory entries by hash value✨
• compare_ether_header(9)Compare two Ethernet headers✨
• compare_gpts(9)Search disk for valid GPT headers and PTEs✨
• compare_vlan_header(9)Compare two vlan headers✨
• compat_only_sysfs_link_entry_to_kobj(9)add a symlink to a kobject pointing to a group or an attribute✨
• compat_ptr_ioctl(9)generic implementation of .compat_ioctl file operation✨
• compat_set_desc_from_vma(9)assigns VMA descriptor @desc fields from a VMA.✨
• compat_vma_mmap(9)Apply the file's .mmap_prepare() hook to an existing VMA and execute any requested actions.✨
• compiletime_assert(9)break build and emit msg if condition is false✨
• complete(9)- signals a single thread waiting on this completion✨
• complete_all(9)- signals all threads waiting on this completion✨
• complete_all_mbos(9)complete MBO's in a list✨
• complete_cmd(9)finish processing a command and return it to the SCSI ML✨
• complete_cmd_fusion(9)Completes command✨
• complete_reaping(9)Finish reaping now that we have flushed the lower layer and then try reaping again in case we deferred reaping due to an outstanding vio.✨
• complete_req(9)This API is invoked from the driver when processing of a request is complete✨
• complete_request_key(9)Complete the construction of a key.✨
• complete_subctxt(9)complete sub-context info✨
• complete_synchronous_action(9)Signal the waiting thread that a synchronous action is complete.✨
• complete_waiter_with_error(9)Complete a page completion with an error code.✨
• complete_waiter_with_page(9)Complete a page completion with a page.✨
• complete_walk(9)successful completion of path walk✨
• complete_with_page(9)Helper to complete the VDO Page Completion request successfully.✨
• complete_write(9)Handle post-commit processing.✨
• completion_as_vdo_flush(9)Convert a generic vdo_completion to a vdo_flush.✨
• completion_done(9)Test to see if a completion has any waiters✨
• completion_needs_page(9)Determine whether a given vdo_page_completion (as a waiter) is requesting a given page number.✨
• component helper usage recommendations(9)✨
• component_add(9)register a component✨
• component_add_typed(9)register a component✨
• component_bind_all(9)bind all components of an aggregate driver✨
• component_compare_dev(9)A common component compare function for dev✨
• component_compare_dev_name(9)A common component compare function for device name✨
• component_compare_of(9)A common component compare function for of_node✨
• component_del(9)unregister a component✨
• component_master_add_with_match(9)register an aggregate driver✨
• component_master_del(9)unregister an aggregate driver✨
• component_match_add(9)add a component match entry✨
• component_match_add_release(9)add a component match entry with release callback✨
• component_match_add_typed(9)add a component match entry for a typed component✨
• component_release_of(9)A common component release function for of_node✨
• component_unbind_all(9)unbind all components of an aggregate driver✨
• compr_exit(9)de-initialize a compressor.✨
• compr_init(9)initialize a compressor.✨
• compress_data_vio(9)Do the actual work of compressing the data on a CPU queue.✨
• compressed_write_end_io(9)The bio_end_io for a compressed block write.✨
• compute_bitstructs(9)Compute the bitmap sizes✨
• compute_boundary(9)Compute the number of pages used at each level of the given root's tree.✨
• compute_e820_crc32(9)calculate crc32 of a given e820 table✨
• compute_effective_cpumask(9)Compute the effective cpumask of the cpuset✨
• compute_effective_nodemask(9)Compute the effective nodemask of the cpuset✨
• compute_fperms(9)convert dfa compressed perms to internal perms and store them so they can be retrieved later.✨
• compute_fullness_hint(9)Translate a slab's free block count into a 'fullness hint' that can be stored in a slab_summary_entry's 7 bits that are dedicated to its free count.✨
• compute_mps_bg_map(9)compute the MPS Buffer Group Map for a Port✨
• compute_partition(9)build the cid partition from this node's held caps✨
• compute_partition_effective_cpumask(9)compute effective_cpus for partition✨
• compute_pre_rec_first_hdl(9)Computes the first hdl position of pre and rec swath given the input params…✨
• compute_recovery_count_byte(9)Compute the recovery count byte for a given recovery count.✨
• compute_usages(9)Compute the lbns in use and block map data blocks counts from the tail of the journal.✨
• con_copy_unimap(9)copy unimap between two vts✨
• con_debug_enter(9)prepare the console for the kernel debugger✨
• con_debug_leave(9)restore console state✨
• con_is_bound(9)checks if driver is bound to the console✨
• con_is_visible(9)checks whether the current console is visible✨
• con_log(9)console log routine✨
• con_set_default_unimap(9)set default unicode map✨
• Concurrency(9)✨
• cond_install_uffd_wp_ptes(9)install uffd-wp markers after clearing PTEs✨
• cond_resched_tasks_rcu_qs(9)Report potential quiescent states to RCU✨
• cond_synchronize_rcu(9)Conditionally wait for an RCU grace period✨
• cond_synchronize_rcu_expedited(9)Conditionally wait for an expedited RCU grace period✨
• cond_synchronize_rcu_expedited_full(9)Conditionally wait for an expedited RCU grace period✨
• cond_synchronize_rcu_full(9)Conditionally wait for an RCU grace period✨
• config_ep_by_speed(9)configures the given endpoint according to gadget speed.✨
• config_ep_by_speed_and_alt(9)configures the given endpoint according to gadget speed.✨
• config_group_find_item(9)search for item in group.✨
• config_group_init(9)initialize a group for use✨
• config_item_init(9)initialize item.✨
• config_item_put(9)decrement refcount for item.✨
• config_item_set_name(9)Set the name of an item✨
• configfs_create_bin_file(9)create a binary attribute file for an item.✨
• configfs_create_dir(9)create a directory for an config_item.✨
• configfs_create_file(9)create an attribute file for an item.✨
• configfs_register_default_group(9)allocates and registers a child group✨
• configfs_register_group(9)creates a parent-child relation between two groups✨
• configfs_remove_dir(9)remove an config_item's directory.✨
• configfs_unregister_default_group(9)unregisters and frees a child group✨
• configfs_unregister_group(9)unregisters a child group from its parent✨
• configure_channel(9)initialize a channel✨
• configure_dma(9)configures the channels for the next transfer✨
• configure_new_device(9)Configures the PCI header information of one board.✨
• configure_new_function(9)Configures the PCI header information of one device✨
• conn_tab_lock(9)Lock conn_tab buckets for conn hash/unhash, not for rehash✨
• connect_bsp_APIC(9)attach the APIC to the interrupt system✨
• connection_broken(9)Determine if the connection to the client is good✨
• console_cpu_notify(9)print deferred console messages after CPU hotplug✨
• console_flush_on_panic(9)flush console content on panic✨
• console_force_preferred_locked(9)force a registered console preferred✨
• console_list_lock(9)Lock the console list✨
• console_list_unlock(9)Unlock the console list✨
• console_lock(9)block the console subsystem from printing✨
• console_lock_spinning_disable_and_check(9)mark end of code where another thread was able to busy wait and check if there is a waiter✨
• console_lock_spinning_enable(9)mark beginning of code where another thread might safely busy wait✨
• console_srcu_read_flags(9)Locklessly read flags of a possibly registered console✨
• console_srcu_read_lock(9)Register a new reader for the SRCU-protected console list✨
• console_srcu_read_unlock(9)Unregister an old reader from the SRCU- protected console list✨
• console_srcu_write_flags(9)Write flags for a registered console✨
• console_suspend_all(9)suspend the console subsystem✨
• console_try_replay_all(9)try to replay kernel log on consoles✨
• console_trylock(9)try to block the console subsystem from printing✨
• console_trylock_spinning(9)try to get console_lock by busy waiting✨
• console_unlock(9)unblock the legacy console subsystem from printing✨
• consolidate(9)consolidate the orphan area.✨
• const_ilog2(9)log base 2 of 32-bit or a 64-bit constant unsigned value✨
• const_test_bit(9)Determine whether a bit is set✨
• construct_sdt_notes_list(9)constructs a list of SDT notes✨
• consume_skb(9)free an skbuff✨
• consume_stock(9)Try to consume stocked charge on this cpu.✨
• container_of(9)cast a member of a structure out to the containing structure✨
• container_of_const(9)cast a member of a structure out to the containing structure and preserve the const-ness of the pointer✨
• Content Adaptive Sharpness Filter (CASF)(9)✨
• Context Engine Map uAPI(9)✨
• context_lock_struct(9)declare or define a context lock struct✨
• context_unsafe(9)disable context checking for contained code✨
• context_unsafe_alias(9)helper to insert a context lock "alias barrier"✨
• contexts(9)✨
• continue_allocating(9)Continue searching for an allocation by enqueuing to wait for scrubbing or switching to the next zone.✨
• continue_at(9)jump to another function with barrier✨
• continue_at_nobarrier(9)jump to another function without barrier✨
• continue_committed_waiter(9)invoked whenever a VIO is to be released from the journal because its entry was committed to disk.✨
• continue_data_vio_with_block_map_slot(9)Read the data_vio's mapping from the block map.✨
• continue_data_vio_with_error(9)Set an error code and then continue processing a data_vio.✨
• continue_parent(9)Continue the parent of a save operation.✨
• continue_traversal(9)Continue traversing a block map tree.✨
• continue_vio(9)Enqueue a vio to run its next callback.✨
• continue_vio_after_io(9)Continue a vio now that its I/O has returned.✨
• continue_waiter(9)Release a data_vio from the journal.✨
• control_phy_tasklet_complete(9)- tasklet complete for CONTROL PHY ascb✨
• controller_fatal_error_show(9)check controller is under fatal err✨
• conversion_time(9)get the Tconv for the slave✨
• convert_hw_matrix(9)converts HW values into fixed31_32 matrix.✨
• convert_mv_rate_to_radiotap(9)converts Tx/Rx rates from Marvell WLAN format (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)✨
• convert_radiotap_rate_to_mv(9)converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)✨
• convert_state(9)Converts the peer's view of the cluster state to our point of view✨
• convert_t(9)Query the device for temperature conversion and read✨
• convert_to_gcda(9)convert profiling data set to gcda file format✨
• convert_to_nt_pathname(9)extract and return windows path string whose share directory prefix was removed from file path✨
• convert_to_physical(9)Convert @error_data to a physical address.✨
• convert_to_reg_val(9)Convert divisor values to hardware values.✨
• convert_to_wide(9)Convert the return buffer addresses into kernel addresses.✨
• convert_xmit_counter(9)calculate flit times for given xmit counter value✨
• copy_data(9)implements data copying function✨
• copy_ddcb_results(9)Copy output state from real DDCB to request✨
• copy_edd(9)Copy the BIOS EDD information from boot_params into a safe place.✨
• copy_frags(9)copy fragments from gather list into skb_shared_info✨
• copy_from_iter_toio(9)copy data from iov_iter to mmio-space✨
• copy_from_read_buf(9)copy read data directly✨
• copy_from_user_nmi(9)NMI safe copy from user✨
• copy_from_user_nofault(9)safely attempt to read from a user-space location✨
• copy_from_user_toio(9)copy data from user-space to mmio-space✨
• copy_fsxattr_to_user(9)copy fsxattr to userspace.✨
• copy_last_highmem_page(9)Copy most the most recent highmem image page.✨
• copy_mc_to_kernel(9)memory copy that handles source exceptions✨
• copy_min_struct_from_user(9)Safe future-proof argument copying✨
• copy_notes_elf32(9)copy ELF note segments in a given buffer✨
• copy_notes_elf64(9)copy ELF note segments in a given buffer✨
• copy_partition(9)Copy a partition from the location specified in the current layout to that in the next layout.✨
• copy_path_name(9)copy src path to dst, possibly truncating✨
• copy_regset_from_user(9)store into thread's user_regset data from user memory✨
• copy_regset_to_user(9)fetch a thread's user_regset data into user memory✨
• copy_remote_vm_str(9)copy a string from another process's address space.✨
• copy_safe_from_sockptr(9)copy a struct from sockptr✨
• copy_scratchpad(9)Copy the content of scratchpad in device EEPROM✨
• copy_siginfo_to_external32(9)copy a kernel siginfo into a compat user siginfo✨
• copy_splice_read(9)Copy data from a file and splice the copy into a pipe✨
• copy_struct_from_user(9)copy a struct from userspace✨
• copy_struct_to_user(9)copy a struct to userspace✨
• copy_time_ns(9)Create timens_for_children from @old_ns✨
• copy_to_iter_fromio(9)copy data from mmio-space to iov_iter✨
• copy_to_user_fromio(9)copy data from mmio-space to user-space✨