📦 linux-manual

82568 pages · page 48 of 413

C (continued)

cmdq_init_queue_ctxt(9)init the queue ctxt of a cmdq✨
cmdq_mbox_create(9)create CMDQ mailbox client and channel✨
cmdq_mbox_destroy(9)destroy CMDQ mailbox client and channel✨
cmdq_pkt_acquire_event(9)append acquire event command to the CMDQ packet✨
cmdq_pkt_assign(9)Append logic assign command to the CMDQ packet, ask GCE to execute an instruction that set a constant value into internal register and use as value, mask or address in read/write instruction.✨
cmdq_pkt_clear_event(9)append clear event command to the CMDQ packet✨
cmdq_pkt_create(9)create a CMDQ packet✨
cmdq_pkt_destroy(9)destroy the CMDQ packet✨
cmdq_pkt_eoc(9)Append EOC and ask GCE to generate an IRQ at end of execution✨
cmdq_pkt_jump_abs(9)Append jump command to the CMDQ packet, ask GCE to execute an instruction that change current thread PC to a absolute physical address which should contains more instruction.✨
cmdq_pkt_jump_rel(9)Append jump command to the CMDQ packet, ask GCE to execute an instruction that change current thread PC to a physical address with relative offset. The target address should contains more instruction.✨
cmdq_pkt_jump_rel_temp(9)Temporary wrapper for new CMDQ helper API✨
cmdq_pkt_logic_command(9)Append logic command to the CMDQ packet, ask GCE to execute an instruction that store the result of logic operation with left and right operand into result_reg_idx.✨
cmdq_pkt_mem_move(9)append memory move command to the CMDQ packet✨
cmdq_pkt_poll(9)Append polling command to the CMDQ packet, ask GCE to execute an instruction that wait for a specified hardware register to check for the value w/o mask. All GCE hardware threads will be blocked by…✨
cmdq_pkt_poll_addr(9)Append blocking POLL command to CMDQ packet✨
cmdq_pkt_poll_mask(9)Append polling command to the CMDQ packet, ask GCE to execute an instruction that wait for a specified hardware register to check for the value w/ mask. All GCE hardware threads will be blocked by…✨
cmdq_pkt_set_event(9)append set event command to the CMDQ packet✨
cmdq_pkt_wfe(9)append wait for event command to the CMDQ packet✨
cmdq_pkt_write(9)append write command to the CMDQ packet✨
cmdq_pkt_write_mask(9)append write command with mask to the CMDQ packet✨
cmdq_pkt_write_mask_pa(9)append write command with mask to the CMDQ packet with pa✨
cmdq_pkt_write_mask_subsys(9)append write command with mask to the CMDQ packet with subsys✨
cmdq_pkt_write_pa(9)append write command to the CMDQ packet with pa_base✨
cmdq_pkt_write_s(9)append write_s command to the CMDQ packet✨
cmdq_pkt_write_s_mask(9)append write_s with mask command to the CMDQ packet✨
cmdq_pkt_write_s_mask_value(9)append write_s command with mask to the CMDQ packet which write value to a physical address✨
cmdq_pkt_write_s_value(9)append write_s command to the CMDQ packet which write value to a physical address✨
cmdq_pkt_write_subsys(9)append write command to the CMDQ packet with subsys✨
cmdq_sync_cmd_handler(9)cmdq completion event handler for sync command✨
cmf_reactivate(9)reactivate measurement block updates✨
cmf_read(9)read one value from the current channel measurement block✨
cmf_readall(9)read the current channel measurement block✨
cmm_alloc_pages(9)Allocate pages and mark them as loaned✨
cmm_exit(9)Module exit✨
cmm_free_pages(9)Free pages and mark them as active✨
cmm_get_mpp(9)Read memory performance parameters✨
cmm_init(9)Module initialization✨
cmm_memory_cb(9)Handle memory hotplug notifier calls✨
cmm_oom_notify(9)OOM notifier✨
cmm_reboot_notifier(9)Make sure pages are not still marked as "loaned"✨
cmm_set_disable(9)Disable/Enable CMM✨
cmm_sysfs_register(9)Register with sysfs✨
cmm_thread(9)CMM task thread✨
cmm_unregister_sysfs(9)Unregister from sysfs✨
cmp_connection_break(9)break the connection to the target✨
cmp_connection_check_used(9)check connection is already esablished or not✨
cmp_connection_destroy(9)free connection manager resources✨
cmp_connection_establish(9)establish a connection to the target✨
cmp_connection_init(9)initializes a connection manager✨
cmp_int(9)perform a three-way comparison of the arguments✨
cmpxchg_guest_abs_with_key(9)Perform cmpxchg on guest absolute address.✨
cn_add_callback(9)Registers new callback with connector core.✨
cn_del_callback(9)Unregisters new callback with connector core.✨
cn_netlink_send(9)Sends message to the specified groups.✨
cn_netlink_send_mult(9)Sends message to the specified groups.✨
cn_proc_mcast_ctl(9)✨
cnstr_shdsc_aead_decap(9)IPSec ESP decapsulation shared descriptor (non- protocol).✨
cnstr_shdsc_aead_encap(9)IPSec ESP encapsulation shared descriptor (non- protocol).✨
cnstr_shdsc_aead_givencap(9)IPSec ESP encapsulation shared descriptor (non-protocol) with HW-generated initialization vector.✨
cnstr_shdsc_aead_null_decap(9)IPSec ESP decapsulation shared descriptor (non-protocol) with no (null) decryption.✨
cnstr_shdsc_aead_null_encap(9)IPSec ESP encapsulation shared descriptor (non-protocol) with no (null) encryption.✨
cnstr_shdsc_ahash(9)ahash shared descriptor✨
cnstr_shdsc_chachapoly(9)Chacha20 + Poly1305 generic AEAD (rfc7539) and IPsec ESP (rfc7634, a.k.a. rfc7539esp) shared descriptor (non-protocol).✨
cnstr_shdsc_gcm_decap(9)gcm decapsulation shared descriptor✨
cnstr_shdsc_gcm_encap(9)gcm encapsulation shared descriptor✨
cnstr_shdsc_rfc4106_decap(9)IPSec ESP gcm decapsulation shared descriptor (non-protocol).✨
cnstr_shdsc_rfc4106_encap(9)IPSec ESP gcm encapsulation shared descriptor (non-protocol).✨
cnstr_shdsc_rfc4543_decap(9)IPSec ESP gmac decapsulation shared descriptor (non-protocol).✨
cnstr_shdsc_rfc4543_encap(9)IPSec ESP gmac encapsulation shared descriptor (non-protocol).✨
cnstr_shdsc_sk_hash(9)shared descriptor for symmetric key cipher-based hash algorithms✨
cnstr_shdsc_skcipher_decap(9)skcipher decapsulation shared descriptor✨
cnstr_shdsc_skcipher_encap(9)skcipher encapsulation shared descriptor✨
cnstr_shdsc_xts_skcipher_decap(9)xts skcipher decapsulation shared descriptor✨
cnstr_shdsc_xts_skcipher_encap(9)xts skcipher encapsulation shared descriptor✨
cntl_stuck_hw_workaround(9)Workaround for I2C engine stuck state✨
cnv_err_stats_alloc(9)Get CNV stats for the provided device.✨
coalesce_put_profile(9)fill reply with a nla nest with four child nla nests.✨
coda_h264_sps_fixup(9)fixes frame cropping values in h.264 SPS✨
codec_init(9)Initialize a Reed-Solomon codec✨
collapse_file(9)collapse filemap/tmpfs/shmem pages into huge one.✨
collapse_max_ptes_none(9)Calculate maximum allowed empty PTEs or PTEs mapping the shared zeropage for the given collapse operation.✨
collapse_max_ptes_shared(9)Calculate maximum allowed PTEs that map shared anonymous pages for the given collapse operation.✨
collapse_max_ptes_swap(9)Calculate the maximum allowed non-present PTEs or the maximum allowed non-present pagecache entries for the given collapse operation.✨
collapse_pte_mapped_thp(9)Try to collapse a pte-mapped THP for mm at address haddr.✨
collect_boot_cpu_data(9)Fill the boot_cpu_data structure.✨
collect_domain_accesses(9)Walk through a file path and collect accesses✨
collect_registered_events(9)call the existing callback function for the event✨
Color format(9)✨
color-management-caps(9)✨
color_blit(9)solid color BLIT operation✨
combine_lpi_states(9)combine local and parent LPI states to form a composite LPI state✨
combine_summaries(9)Treating the current entries buffer as the on-disk value of all zones, update every zone to the correct values for every slab.✨
combiner_resume(9)restore interrupt combiner state after resume✨
combiner_suspend(9)save interrupt combiner state before suspend✨
comedi_8254_cascade_ns_to_timer(9)calculate the cascaded divisor values✨
comedi_8254_io_alloc(9)allocate and initialize the 8254 device for pio access✨
comedi_8254_iocb_fn(9)call-back function type for 8254 register access✨
comedi_8254_load(9)program the mode and initial count of a counter✨
comedi_8254_mm_alloc(9)allocate and initialize the 8254 device for mmio access✨
comedi_8254_ns_to_timer(9)calculate the divisor value for nanosec timing✨
comedi_8254_pacer_enable(9)set the mode and load the cascaded counters✨
comedi_8254_read(9)read the current counter value✨
comedi_8254_set_busy(9)set/clear the "busy" flag for a given counter✨
comedi_8254_set_mode(9)set the mode of a counter✨
comedi_8254_status(9)return the status of a counter✨
comedi_8254_subdevice_init(9)initialize a comedi_subdevice for the 8254 timer✨
comedi_8254_update_divisors(9)update the divisors for the cascaded counters✨
comedi_8254_write(9)load a 16-bit initial counter value✨
comedi_alloc_devpriv(9)Allocate memory for the device private data✨
comedi_alloc_spriv(9)Allocate memory for the subdevice private data✨
comedi_alloc_subdev_readback(9)Allocate memory for the subdevice readback✨
comedi_alloc_subdevices(9)Allocate subdevices for COMEDI device✨
comedi_auto_config(9)Create a COMEDI device for a hardware device✨
comedi_auto_unconfig(9)Unconfigure auto-allocated COMEDI device✨
comedi_buf_n_bytes_ready(9)Determine amount of unread data in buffer✨
comedi_buf_read_alloc(9)Reserve buffer space for reading✨
comedi_buf_read_free(9)Free buffer space after it has been read✨
comedi_buf_read_n_available(9)Determine amount of readable buffer space✨
comedi_buf_read_samples(9)Read sample data from COMEDI buffer✨
comedi_buf_write_alloc(9)Reserve buffer space for writing✨
comedi_buf_write_free(9)Free buffer space after it is written✨
comedi_buf_write_samples(9)Write sample data to COMEDI buffer✨
comedi_bytes_per_sample(9)Determine subdevice sample size✨
comedi_bytes_per_scan(9)Get length of asynchronous command "scan" in bytes✨
comedi_bytes_per_scan_cmd(9)Get length of asynchronous command "scan" in bytes✨
comedi_bytes_to_samples(9)Convert a number of bytes to a number of samples✨
comedi_chan_range_is_bipolar(9)Test if channel-specific range is bipolar✨
comedi_chan_range_is_external(9)Test if channel-specific range is external✨
comedi_chan_range_is_unipolar(9)Test if channel-specific range is unipolar✨
comedi_check_chanlist(9)Validate each element in a chanlist.✨
comedi_check_request_region(9)Request an I/O region for a legacy driver✨
comedi_check_trigger_arg_is(9)Trivially validate a trigger argument✨
comedi_check_trigger_arg_max(9)Trivially validate a trigger argument max✨
comedi_check_trigger_arg_min(9)Trivially validate a trigger argument min✨
comedi_check_trigger_is_unique(9)Make sure a trigger source is unique✨
comedi_check_trigger_src(9)Trivially validate a comedi_cmd trigger source✨
comedi_close(9)Close a COMEDI device from the kernel✨
comedi_close_from(9)Close a COMEDI device from the kernel with loop checks✨
comedi_dev_get_from_minor(9)Get COMEDI device by minor device number✨
comedi_dev_put(9)Release a use of a COMEDI device✨
comedi_dio_insn_config(9)Boilerplate (*insn_config) for DIO subdevices✨
comedi_dio_update_state(9)Update the internal state of DIO subdevices✨
comedi_driver_register(9)Register a low-level COMEDI driver✨
comedi_driver_unregister(9)Unregister a low-level COMEDI driver✨
comedi_event(9)Handle events for asynchronous COMEDI command✨
comedi_get_is_subdevice_running(9)Get if async command running on subdevice✨
comedi_handle_events(9)Handle events and possibly stop acquisition✨
comedi_inc_scan_progress(9)Update scan progress in asynchronous command✨
comedi_is_subdevice_running(9)Check if async command running on subdevice✨
comedi_isadma_alloc(9)allocate and initialize the ISA DMA✨
comedi_isadma_disable(9)disable the ISA DMA channel✨
comedi_isadma_disable_on_sample(9)disable the ISA DMA channel✨
comedi_isadma_free(9)free the ISA DMA✨
comedi_isadma_poll(9)poll the current DMA transfer✨
comedi_isadma_program(9)program and enable an ISA DMA transfer✨
comedi_isadma_set_mode(9)set the ISA DMA transfer direction✨
comedi_legacy_detach(9)A generic (*detach) function for legacy drivers✨
comedi_load_firmware(9)Request and load firmware for a device✨
comedi_nsamples_left(9)Return the number of samples left in the command✨
comedi_nscans_left(9)Return the number of scans left in the command✨
comedi_offset_munge(9)Convert between offset binary and 2's complement✨
comedi_open(9)Open a COMEDI device from the kernel✨
comedi_open_from(9)Open a COMEDI device from the kernel with loop checks✨
comedi_pci_auto_config(9)Configure/probe a PCI COMEDI device✨
comedi_pci_auto_unconfig(9)Unconfigure/remove a PCI COMEDI device✨
comedi_pci_detach(9)A generic "detach" handler for PCI COMEDI drivers✨
comedi_pci_disable(9)Release the regions and disable the PCI device✨
comedi_pci_driver_register(9)Register a PCI COMEDI driver✨
comedi_pci_driver_unregister(9)Unregister a PCI COMEDI driver✨
comedi_pci_enable(9)Enable the PCI device and request the regions✨
comedi_pcmcia_auto_config(9)Configure/probe a PCMCIA COMEDI device✨
comedi_pcmcia_auto_unconfig(9)Unconfigure/remove a PCMCIA COMEDI device✨
comedi_pcmcia_disable(9)Disable the PCMCIA device and release the regions✨
comedi_pcmcia_driver_register(9)Register a PCMCIA COMEDI driver✨
comedi_pcmcia_driver_unregister(9)Unregister a PCMCIA COMEDI driver✨
comedi_pcmcia_enable(9)Request the regions and enable the PCMCIA device✨
comedi_put_is_subdevice_running(9)Put if async command running on subdevice✨
comedi_range_is_bipolar(9)Test if subdevice range is bipolar✨
comedi_range_is_external(9)Test if subdevice range is external✨
comedi_range_is_unipolar(9)Test if subdevice range is unipolar✨
comedi_readback_insn_read(9)A generic (*insn_read) for subdevice readback.✨
comedi_request_region(9)Request an I/O region for a legacy driver✨
comedi_sample_shift(9)Determine log2 of subdevice sample size✨
comedi_samples_to_bytes(9)Convert a number of samples to a number of bytes✨
comedi_set_hw_dev(9)Set hardware device associated with COMEDI device✨
comedi_set_spriv_auto_free(9)Mark subdevice private data as freeable✨
comedi_timeout(9)Busy-wait for a driver condition to occur✨
comedi_to_pci_dev(9)Return PCI device attached to COMEDI device✨
comedi_to_pcmcia_dev(9)Return PCMCIA device attached to COMEDI device✨
comedi_to_usb_dev(9)Return USB device attached to COMEDI device✨
comedi_to_usb_interface(9)Return USB interface attached to COMEDI device✨
comedi_usb_auto_config(9)Configure/probe a USB COMEDI driver✨
comedi_usb_auto_unconfig(9)Unconfigure/disconnect a USB COMEDI device✨
comedi_usb_driver_register(9)Register a USB COMEDI driver✨
comedi_usb_driver_unregister(9)Unregister a USB COMEDI driver✨
Command list validator for VC4.(9)✨
Command Transport (CT).(9)✨
commit_creds(9)Install new credentials upon the current task✨
commit_minimal_transition_state(9)Create a transition pipe split state✨