📦 linux-manual

82568 pages · page 302 of 413

S (continued)

stmmac_mdio_unregister(9)✨
stmmac_mdio_write_c22(9)✨
stmmac_mdio_write_c45(9)✨
stmmac_mmc_setup(9)setup the Mac Management Counters (MMC)✨
stmmac_mtl_configuration(9)Configure MTL✨
stmmac_mtl_setup(9)parse DT parameters for multiple queues configuration✨
stmmac_of_get_mac_mode(9)retrieves the interface of the MAC✨
stmmac_of_get_mdio(9)Gets the MDIO bus from the devicetree.✨
stmmac_pci_probe(9)✨
stmmac_pci_remove(9)✨
stmmac_pltfr_exit(9)✨
stmmac_pltfr_get_irq_array(9)Read per-channel IRQs from platform device✨
stmmac_pltfr_init(9)✨
stmmac_pltfr_probe(9)✨
stmmac_pltfr_remove(9)✨
stmmac_probe_config_dt(9)parse device-tree driver parameters✨
stmmac_ptp_register(9)✨
stmmac_ptp_unregister(9)✨
stmmac_release(9)close entry point of the driver✨
stmmac_reset_queues_param(9)reset queue parameters✨
stmmac_resume(9)resume callback✨
stmmac_rx(9)manage the receive process✨
stmmac_rx_dirty(9)Get RX queue dirty✨
stmmac_rx_queue_dma_chan_map(9)Map RX queue to RX dma channel✨
stmmac_rx_refill(9)refill used skb preallocated buffers✨
stmmac_set_clk_tx_rate(9)set the clock rate for the MAC transmit clock✨
stmmac_set_dma_operation_mode(9)Set DMA operation mode by channel✨
stmmac_set_rx_mode(9)entry point for multicast addressing✨
stmmac_set_time(9)✨
stmmac_set_tx_queue_weight(9)Set TX queue weight✨
stmmac_setup_dma_desc(9)Generate a dma_conf and allocate DMA queue✨
stmmac_start_all_dma(9)start all RX and TX DMA channels✨
stmmac_start_rx_dma(9)start RX DMA channel✨
stmmac_start_tx_dma(9)start TX DMA channel✨
stmmac_stop_all_dma(9)stop all RX and TX DMA channels✨
stmmac_stop_rx_dma(9)stop RX DMA channel✨
stmmac_stop_sw_lpi(9)stop transmitting LPI✨
stmmac_stop_tx_dma(9)stop TX DMA channel✨
stmmac_suspend(9)suspend callback✨
stmmac_try_to_start_sw_lpi(9)check and enter in LPI mode✨
stmmac_tso_allocator(9)close entry point of the driver✨
stmmac_tso_xmit(9)Tx entry point of the driver for oversized frames (TSO)✨
stmmac_tx_clean(9)to manage the transmission completion✨
stmmac_tx_err(9)to manage the tx error✨
stmmac_tx_timeout(9)✨
stmmac_tx_timer(9)mitigation sw timer for tx.✨
stmmac_verify_args(9)verify the driver parameters.✨
stmmac_xmit(9)Tx entry point of the driver✨
stmp3xxx_wdt_set_timeout(9)configure the watchdog inside the STMP3xxx RTC✨
stmpe_block_read(9)read multiple STMPE registers✨
stmpe_block_write(9)write multiple STMPE registers✨
stmpe_disable(9)disable blocks on an STMPE device✨
stmpe_enable(9)enable blocks on an STMPE device✨
stmpe_reg_read(9)read a single STMPE register✨
stmpe_reg_write(9)write a single STMPE register✨
stmpe_set_altfunc(9)set the alternate function for STMPE pins✨
stmpe_set_bits(9)set the value of a bitfield in a STMPE register✨
stop(9)Stops the ll2✨
stop_activity(9)Stops udc endpoints✨
stop_core_cpuslocked(9)- stop all threads on just one core✨
stop_cpus(9)stop multiple cpus✨
stop_machine(9)freeze the machine on all CPUs and run this function✨
stop_machine_cpuslocked(9)freeze the machine on all CPUs and run this function✨
stop_machine_from_inactive_cpu(9)stop_machine() from inactive CPU✨
stop_one_cpu(9)stop a cpu✨
stop_one_cpu_nowait(9)stop a cpu but don't wait for completion✨
stop_pci_io(9)Stop all PCI IO to a given device✨
stop_scrubbing(9)Tell the scrubber to stop scrubbing after it finishes the slab it is currently working on.✨
stop_spu_isolate(9)✨
stop_sync_thread(9)wait for sync_thread to stop if it's running.✨
stop_tty(9)propagate flow control✨
stop_two_cpus(9)stops two cpus✨
store_cpu_caps(9)Store a snapshot of CPU capabilities✨
store_dscr_default(9)Update the system wide DSCR default✨
store_filter(9)changes the scancode filter value✨
store_gcov_u32(9)store 32 bit number in gcov format to buffer✨
store_gcov_u64(9)store 64 bit number in gcov format to buffer✨
store_hibernate(9)Initiate partition hibernation✨
store_protocols(9)changes the current/wakeup IR protocol(s)✨
store_release_wake_up(9)update a variable and send a wake_up✨
store_wakeup_protocols(9)changes the wakeup IR protocol(s)✨
stpcpy(9)copy a string from src to dest returning a pointer to the new end of dest, including src's %NUL-terminator. May overrun dest.✨
str_field_delimit(9)delimit a string based on a separator char.✨
str_has_prefix(9)Test if a string has a given prefix✨
str_plural(9)Return the simple pluralization based on English counts✨
str_to_num(9)Convert string into number and copy with endings like KiB for kilobyte MiB for megabyte GiB for gigabyte✨
stratix10_svc_add_async_client(9)Add an asynchronous client to a Stratix 10 service channel.✨
stratix10_svc_allocate_memory(9)allocate the momory✨
stratix10_svc_async_done(9)Complete an asynchronous transaction✨
stratix10_svc_async_exit(9)Clean up and exit the asynchronous service controller✨
stratix10_svc_async_init(9)Initialize the Stratix10 service controller for asynchronous operations.✨
stratix10_svc_async_poll(9)Polls the status of an asynchronous service request.✨
stratix10_svc_async_prepare_response(9)Prepare the response data for an asynchronous transaction.✨
stratix10_svc_async_send(9)Send an asynchronous message to the SDM mailbox in EL3 secure firmware.✨
stratix10_svc_done(9)complete service request✨
stratix10_svc_free_channel(9)free service channel.✨
stratix10_svc_free_memory(9)free allocated memory✨
stratix10_svc_remove_async_client(9)Remove an asynchronous client from the Stratix 10 service channel.✨
stratix10_svc_request_channel_byname(9)request service channel✨
stratix10_svc_send(9)send a message to the remote✨
strcat(9)Append a string to an existing string✨
strchr(9)Find the first occurrence of a character in a string✨
strchrnul(9)Find and return a character in a string, or end of string✨
strcmp(9)Compare two strings✨
strcpy(9)Copy a string into another string buffer✨
strcspn(9)Calculate the length of the initial substring of @s which does not contain letters in @reject✨
Streams(9)✨
strends(9)Check if a string ends with another string.✨
strfilter__compare(9)compare given string and a string filter✨
strfilter__delete(9)delete a string filter✨
strfilter__new(9)Create a new string filter✨
strfilter__or(9)Append an additional rule by logical-or✨
strfilter__string(9)Reconstruct a rule string from filter✨
strglobmatch(9)glob expression pattern matching✨
strim(9)Removes leading and trailing whitespace from @s.✨
STRING_BENCH(9)Benchmark string functions.✨
STRING_BENCH_BUF(9)Benchmark harness for single-buffer functions.✨
string_escape_mem(9)quote characters in the given memory buffer✨
string_get_size(9)get the size in the specified units✨
string_unescape(9)unquote characters in the given string✨
strip(9)strips all characters in 'reject' from 's'✨
strip_whitespace(9)Strip and pad trailing whitespace.✨
strlazymatch(9)matching pattern strings lazily with glob pattern✨
strlcat(9)Append a string to an existing string✨
strlcpy(9)Copy a C-string into a sized buffer✨
strlcpy_attr(9)Copy a length-limited, NULL-terminated string with bound checks✨
strlen(9)Return count of characters in a NUL-terminated string✨
strncasecmp(9)Case insensitive, length-limited string comparison✨
strncat(9)Append a string to an existing string✨
strnchr(9)Find a character in a length limited string✨
strnchrnul(9)Find and return a character in a length limited string, or end of string✨
strncmp(9)Compare two length-limited strings✨
strncpy_from_user(9)- Copy a NUL terminated string from userspace.✨
strncpy_from_user_nofault(9)- Copy a NUL terminated string from unsafe user address.✨
strndup_user(9)duplicate an existing string from user space✨
strnlen(9)Return bounded count of characters in a NUL-terminated string✨
strnlen_user(9)- Get the size of a user string INCLUDING final NUL.✨
strnlen_user_nofault(9)- Get the size of a user string INCLUDING final NUL.✨
strnstr(9)Find the first substring in a length-limited string✨
strpbrk(9)Find the first occurrence of a set of characters✨
strrchr(9)Find the last occurrence of a character in a string✨
strreplace(9)Replace all occurrences of character in string.✨
strscpy(9)string safe^W truncate copy✨
strscpy_check(9)Run a specific test case.✨
strscpy_pad(9)Copy a C-string into a sized buffer✨
strsep(9)Split a string into tokens✨
strset_include(9)test if a string set should be included in reply✨
strspn(9)Calculate the length of the initial substring of @s which only contain letters in @accept✨
strstarts(9)does @str start with @prefix?✨
strstr(9)Find the first substring in a %NUL terminated string✨
strtailcmp(9)Compare the tail of two strings✨
strtobool(9)convert common user inputs into boolean values✨
strtomem(9)Copy NUL-terminated string to non-NUL-terminated buffer✨
strtomem_pad(9)Copy NUL-terminated string to non-NUL-terminated buffer✨
strtoul_lenient(9)parse an ASCII formatted integer from a buffer and only fail on overflow✨
struct __drm_i915_gem_create_ext(9)Existing gem_create behaviour, with added extension support using struct i915_user_extension.✨
struct __drm_i915_memory_region_info(9)Describes one region as known to the driver.✨
struct __guc_mmio_reg_descr(9)GuC mmio register descriptor✨
struct __guc_mmio_reg_descr_group(9)The group of register descriptor✨
struct __prci_clock(9)describes a clock device managed by PRCI✨
struct __prci_data(9)per-device-instance data✨
struct __prci_wrpll_data(9)WRPLL configuration and integration data✨
struct _boot_device(9)boot device info✨
struct _enclosure_node(9)enclosure information✨
struct _event_ack_list(9)delayed event acknowledgment list✨
struct _internal_cmd(9)internal commands struct✨
struct _sas_device(9)attached device information✨
struct _sas_node(9)sas_host/expander information✨
struct _sas_phy(9)phy information✨
struct _sas_port(9)wide/narrow sas port information✨
struct _sc_list(9)delayed SAS_IO_UNIT_CONTROL message list✨
struct _scsi_io_transfer(9)scsi io transfer✨
struct _thermal_state(9)Represent the current thermal event state✨
struct _tr_list(9)target reset list✨
struct a5psw(9)switch struct✨
struct a6xx_info(9)a6xx specific information from device table✨
struct a8293_platform_data(9)Platform data for the a8293 driver✨
struct ab8500(9)ab8500 internal structure✨
struct ab8500_adc_cal_data(9)Table for storing gain and offset for the calibrated ADC channels✨
struct ab8500_bm_capacity_levels(9)ab8500 capacity level data✨
struct ab8500_bm_charger_parameters(9)Charger specific parameters✨
struct ab8500_bm_data(9)ab8500 battery management data @bi battery info from device tree @temp_now present battery temperature @temp_interval_chg temperature measurement interval in s when charging @temp_interval_nochg…✨
struct ab8500_btemp(9)ab8500 BTEMP device information✨
struct ab8500_btemp_interrupts(9)ab8500 interrupts✨
struct ab8500_chargalg(9)ab8500 Charging algorithm device information✨
struct ab8500_charge_curr_maximization(9)Charger maximization parameters✨
struct ab8500_charger(9)ab8500 Charger device information✨
struct ab8500_charger_interrupts(9)ab8500 interrupts✨
struct ab8500_ext_regulator_info(9)ab8500 regulator information✨
struct ab8500_fg(9)ab8500 FG device information✨
struct ab8500_fg_interrupts(9)ab8500 fg interrupts✨
struct ab8500_fg_parameters(9)Fuel gauge algorithm parameters, in seconds if not specified✨
struct ab8500_gpadc(9)AB8500 GPADC device information✨
struct ab8500_gpadc_chan_info(9)per-channel GPADC info✨
struct ab8500_platform_data(9)AB8500 platform data✨
struct ab8500_ponkey(9)ab8500 ponkey information✨
struct ab8500_regulator_info(9)ab8500 regulator information✨
struct ab8500_shared_mode(9)is used when mode is shared between two regulators.✨
struct abp2_data(9)✨
struct abp2_range_config(9)list of pressure ranges based on nomenclature✨