📦 linux-manual

82568 pages · page 239 of 413

P (continued)

parport_write(9)write a block of data to a parallel port✨
parport_yield(9)relinquish a parallel port temporarily✨
parport_yield_blocking(9)relinquish a parallel port temporarily✨
parse_action(9)Parse the action type given a token string.✨
parse_aliases(9)search names for entries beginning or equalling str ignoring case. If mutliple entries in names match str then the longest is chosen.✨
parse_bool(9)Parse a two-valued option into a bool.✨
parse_capability(9)convert device capabilities to NIC capabilities✨
parse_cidxtid(9)parse @cidxtid field✨
parse_delay_str(9)parse an unsigned decimal integer delay✨
parse_device_config(9)Convert the dmsetup table into a struct device_config.✨
parse_dmar_table(9)parses the DMA reporting table✨
parse_efi_signature_list(9)Parse an EFI signature list for certificates✨
parse_events__decode_legacy_cache(9)Search name for the legacy cache event name composed of 1, 2 or 3 hyphen separated sections. The first section is the cache type while the others are the optional op and optional result. To make…✨
parse_events__filter_pmu(9)returns false if a wildcard PMU should be considered, true if it should be filtered.✨
parse_feature(9)parse a feature on given device feature list✨
parse_fw_cfg(9)Parse firmware pinconf parameters✨
parse_header(9)Parse policy header information.✨
parse_hex_sentence(9)Convert a ascii hex representation into byte array.✨
parse_hwmon_filename(9)Parse filename into constituent parts.✨
parse_ids(9)Build the event string for the ids and parse them creating an evlist. The encoded metric_ids are decoded.✨
parse_int_array_user(9)Split string into a sequence of integers✨
parse_key_value_pairs(9)Parse all key/value pairs from a list of arguments.✨
parse_lease_state(9)parse lease context contained in file open request✨
parse_memory(9)Parse a string into an index memory value.✨
parse_message(9)parses a single message from the rx slot✨
parse_mpp_data(9)✨
parse_mpp_x_data(9)✨
parse_msg(9)Print some information and call the notifiers on an RX message✨
parse_mtd_partitions(9)parse and register MTD partitions✨
parse_next_property(9)process the next property from raw input buffer✨
parse_OID(9)Parse an OID from a bytestream✨
parse_one_key_value_pair(9)Parse one key/value pair and update the configuration data structure.✨
parse_one_thread_config_spec(9)Parse one component of a thread parameter configuration string and update the configuration data structure.✨
parse_operation(9)Parse the operation type given a token string.✨
parse_option_str(9)Parse a string and check an option is set or not✨
parse_optional_arguments(9)Parse the configuration string passed in for optional arguments.✨
parse_package(9)parse acpi package for retrieving SAR information✨
parse_pcc_subspace(9)Count PCC subspaces defined✨
parse_prop_cells(9)Property parsing function for suppliers✨
parse_property(9)Parse a rule property given a token string.✨
parse_protocol_change(9)parses a protocol change request✨
parse_rule(9)parse a policy rule line.✨
parse_slab_size(9)Parse a string option into a slab size value.✨
parse_suffix_prop_cells(9)Suffix property parsing function for suppliers✨
parse_tag_11_packet(9)✨
parse_tag_1_packet(9)✨
parse_tag_3_packet(9)✨
parse_test_vector(9)parse a single test vector string✨
parse_thread_config_string(9)Parse the configuration string passed and update the specified counts and other parameters of various types of threads to be created.✨
parse_timing_property(9)parse timing_entry from device_node✨
parse_tree_node(9)returns a device entry in the iotree✨
parse_version(9)Parse policy version.✨
parse_vlan_tag(9)Parse vlan tag from vlan header.✨
Partial backup and restoration of a struct ttm_tt.(9)✨
Partial Unmapping of Ranges(9)✨
partial_decompress(9)decompresses part or all of a compressed buffer✨
partition_cpus_change(9)Handle partition state changes due to CPU mask updates✨
partition_is_populated(9)check if partition has tasks✨
partition_mem(9)partition memory and configure TP memory settings✨
partition_mode (int)(9)✨
pat_bp_init(9)Initialize the PAT MSR value and PAT table✨
pat_pfn_immune_to_uc_mtrr(9)Check whether the PAT memory type of @pfn cannot be overridden by UC MTRR memory type.✨
path_connected(9)Verify that a dentry is below mnt.mnt_root✨
path_from_stashed(9)create path from stashed or new dentry✨
path_get(9)get a reference to a path✨
path_has_submounts(9)check for mounts over a dentry in the current namespace.✨
path_is_mountpoint(9)Check if path is a mount in the current namespace.✨
path_mounted(9)check whether path is mounted✨
path_overmounted(9)check if path is overmounted✨
path_put(9)put a reference to a path✨
pathmask_to_pos(9)find the position of the left-most bit in a pathmask✨
pause_named_trigger(9)Pause all named triggers with the same name✨
PBUF(9)Initialize .pbuf and .pbuf_size✨
pbus_select_window(9)Select bridge window for a resource✨
pbus_select_window_for_type(9)Select bridge window for a resource type✨
pbus_size_io(9)Size the I/O window of a given bus✨
pbus_size_mem(9)Size the memory window of a given bus✨
pc87413_exit(9)module's "destructor"✨
pc87413_init(9)module's "constructor"✨
pc87413_ioctl(9)✨
pc87413_notify_sys(9)✨
pc87413_open(9)✨
pc87413_release(9)✨
pc87413_status(9)✨
pc87413_write(9)✨
pcache_cache_flush(9)Flush all ksets to persist any pending cache data✨
pcc_data_alloc(9)Allocate the pcc_data memory for pcc subspace✨
pcc_map_interrupt(9)Map a PCC subspace GSI to a linux IRQ number✨
pcc_mbox_free_channel(9)Clients call this to free their Channel.✨
pcc_mbox_irq(9)PCC mailbox interrupt handler✨
pcc_mbox_probe(9)Called when we find a match for the PCCT platform device. This is purely used to represent the PCCT as a virtual device for registering with the generic Mailbox framework.✨
pcc_mbox_request_channel(9)PCC clients call this function to request a pointer to their PCC subspace, from which they can get the details of communicating with the remote.✨
pcc_parse_subspace_db_reg(9)Parse the PCC doorbell register✨
pcc_parse_subspace_irq(9)Parse the PCC IRQ and PCC ACK register✨
pcc_parse_subspace_shmem(9)Parse the PCC Shared Memory Region information✨
pcc_send_data(9)Called from Mailbox Controller code. Used here only to ring the channel doorbell. The PCC client specific read/write is done in the client driver in order to maintain atomicity over PCC channel…✨
pcc_shutdown(9)Called from Mailbox Controller code. Used here to free the interrupt.✨
pcc_startup(9)Called from Mailbox Controller code. Used here to request the interrupt.✨
pccard_loop_tuple(9)loop over tuples in the CIS✨
pccard_read_tuple(9)internal CIS tuple access✨
pccard_validate_cis(9)check whether card has a sensible CIS✨
pch_gbe_alloc_queues(9)Allocate memory for all rings✨
pch_gbe_alloc_rx_buffers(9)Replace used receive buffers; legacy & extended✨
pch_gbe_alloc_tx_buffers(9)Allocate transmit buffers✨
pch_gbe_change_mtu(9)Change the Maximum Transfer Unit✨
pch_gbe_check_copper_options(9)Range Checking for Link Options, Copper Version✨
pch_gbe_check_options(9)Range Checking for Command Line Parameters✨
pch_gbe_clean_rx(9)Send received data up the network stack; legacy✨
pch_gbe_clean_rx_ring(9)Free Rx Buffers✨
pch_gbe_clean_tx(9)Reclaim resources after transmit completes✨
pch_gbe_clean_tx_ring(9)Free Tx Buffers✨
pch_gbe_configure_rx(9)Configure Receive Unit after Reset✨
pch_gbe_configure_tx(9)Configure Transmit Unit after Reset✨
pch_gbe_down(9)Down GbE network device✨
pch_gbe_free_irq(9)Free an interrupt✨
pch_gbe_free_rx_resources(9)Free Rx Resources✨
pch_gbe_free_tx_resources(9)Free Tx Resources✨
pch_gbe_get_drvinfo(9)Report driver information✨
pch_gbe_get_ethtool_stats(9)Return statistics about the device✨
pch_gbe_get_link_ksettings(9)Get device-specific settings✨
pch_gbe_get_pauseparam(9)Report pause parameters✨
pch_gbe_get_regs(9)Get device registers✨
pch_gbe_get_regs_len(9)Report the size of device registers✨
pch_gbe_get_ringparam(9)Report ring sizes✨
pch_gbe_get_strings(9)Return a set of strings that describe the requested objects✨
pch_gbe_get_wol(9)Report whether Wake-on-Lan is enabled✨
pch_gbe_init_phy(9)Initialize PHY✨
pch_gbe_init_stats(9)Initialize status✨
pch_gbe_intr(9)Interrupt Handler✨
pch_gbe_ioctl(9)Controls register through a MII interface✨
pch_gbe_irq_disable(9)Mask off interrupt generation on the NIC✨
pch_gbe_irq_enable(9)Enable default interrupt generation settings✨
pch_gbe_mac_ctrl_miim(9)Control MIIM interface✨
pch_gbe_mac_force_mac_fc(9)Force the MAC's flow control settings✨
pch_gbe_mac_init_rx_addrs(9)Initialize receive address's✨
pch_gbe_mac_mar_set(9)Set MAC address register✨
pch_gbe_mac_read_mac_addr(9)Read MAC address✨
pch_gbe_mac_reset_hw(9)Reset hardware✨
pch_gbe_mac_set_pause_packet(9)Set pause packet✨
pch_gbe_mac_set_wol_event(9)Set wake-on-lan event✨
pch_gbe_mdio_read(9)The read function for mii✨
pch_gbe_mdio_write(9)The write function for mii✨
pch_gbe_napi_poll(9)NAPI receive and transfer polling callback✨
pch_gbe_netpoll(9)Used by things like netconsole to send skbs✨
pch_gbe_nway_reset(9)Restart autonegotiation✨
pch_gbe_open(9)Called when a network interface is made active✨
pch_gbe_phy_disable_hibernate(9)Disable the PHY low power state✨
pch_gbe_phy_get_id(9)Retrieve the PHY ID and revision✨
pch_gbe_phy_hw_reset(9)PHY hardware reset✨
pch_gbe_phy_init_setting(9)PHY initial setting✨
pch_gbe_phy_power_down(9)Power down PHY✨
pch_gbe_phy_power_up(9)restore link in case the phy was powered down✨
pch_gbe_phy_read_reg_miic(9)Read MII control register✨
pch_gbe_phy_set_rgmii(9)RGMII interface setting✨
pch_gbe_phy_sw_reset(9)PHY software reset✨
pch_gbe_phy_tx_clk_delay(9)Setup TX clock delay via the PHY✨
pch_gbe_phy_write_reg_miic(9)Write MII control register✨
pch_gbe_reinit_locked(9)Re-initialization✨
pch_gbe_request_irq(9)Allocate an interrupt line✨
pch_gbe_reset(9)Reset GbE✨
pch_gbe_reset_task(9)Reset processing at the time of transmission timeout✨
pch_gbe_set_features(9)Reset device after features changed✨
pch_gbe_set_link_ksettings(9)Set device-specific settings✨
pch_gbe_set_mac(9)Change the Ethernet Address of the NIC✨
pch_gbe_set_multi(9)Multicast and Promiscuous mode set✨
pch_gbe_set_pauseparam(9)Set pause parameters✨
pch_gbe_set_ringparam(9)Set ring sizes✨
pch_gbe_set_wol(9)Turn Wake-on-Lan on or off✨
pch_gbe_setup_rctl(9)Configure the receive control registers✨
pch_gbe_setup_rx_resources(9)Allocate Rx resources (Descriptors)✨
pch_gbe_setup_tctl(9)configure the Transmit control registers✨
pch_gbe_setup_tx_resources(9)Allocate Tx resources (Descriptors)✨
pch_gbe_stop(9)Disables a network interface✨
pch_gbe_sw_init(9)Initialize general software structures (struct pch_gbe_adapter)✨
pch_gbe_tx_queue(9)Carry out queuing of the transmission data✨
pch_gbe_tx_timeout(9)Respond to a Tx Hang✨
pch_gbe_unmap_and_free_rx_resource(9)Unmap and free rx socket buffer✨
pch_gbe_unmap_and_free_tx_resource(9)Unmap and free tx socket buffer✨
pch_gbe_up(9)Up GbE network device✨
pch_gbe_update_stats(9)Update the board statistics counters✨
pch_gbe_validate_option(9)Validate option✨
pch_gbe_wait_clr_bit(9)Wait to clear a bit✨
pch_gbe_watchdog(9)Watchdog process✨
pch_gbe_xmit_frame(9)Packet transmitting start✨
pch_i2c_cb(9)Interrupt handler Call back function✨
pch_i2c_disbl_int(9)Disable PCH I2C interrupts✨
pch_i2c_func(9)return the functionality of the I2C driver✨
pch_i2c_handler(9)interrupt handler for the PCH I2C controller✨
pch_i2c_init(9)hardware initialization of I2C module✨
pch_i2c_readbytes(9)read data from I2C bus in normal mode.✨
pch_i2c_repstart(9)generate repeated start condition in normal mode✨
pch_i2c_restart(9)Generate I2C restart condition in normal mode.✨
pch_i2c_sendack(9)send ACK✨
pch_i2c_sendnack(9)send NACK✨
pch_i2c_start(9)Generate I2C start condition in normal mode.✨
pch_i2c_stop(9)generate stop condition in normal mode.✨
pch_i2c_wait_for_bus_idle(9)check the status of bus.✨
pch_i2c_writebytes(9)write data to I2C bus in normal mode✨
pch_i2c_xfer(9)Reading adnd writing data through I2C bus✨
pch_phub_read_gbe_mac_addr(9)Read Gigabit Ethernet MAC address✨