pch_gbe_setup_tctl(9)

🌸 pch_gbe_setup_tctl 🌸

okay so bestie, welcome to the pch_gbe_setup_tctl(9) page from the Kernel API Manual — yes, section 9, kernel-space, very main character of it. this little icon does exactly one thing and does it with its whole chest: it configures the Transmit control registers. that's the assignment. that's the entire assignment. 💅

---

✨ NAME ✨

pch_gbe_setup_tctl — configure the Transmit control registers ✨

like, literally the transmit control registers. it's giving "one job, slayed". 🎀

---

🦋 SYNOPSIS 🦋

void pch_gbe_setup_tctl (struct pch_gbe_adapter *adapter );

no return value, no drama, just vibes and a void. lowkey respect. 🫶

---

💖 ARGUMENTS 💖

• adapter — the board private structure 💫. that's your one and only input, bestie. it's the board's own private little world, and this function gets handed the keys to it.

---

🔥 SEE ALSO 🔥

okay this is the part where the manpage pops off, because the whole friend group shows up. every single one of these, no cap, all of them:

• Kernel file ./drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
• pch_gbe_mac_read_mac_addr(9)
• pch_gbe_wait_clr_bit(9)
• pch_gbe_mac_mar_set(9)
• pch_gbe_mac_reset_hw(9)
• pch_gbe_mac_init_rx_addrs(9)
• pch_gbe_mac_force_mac_fc(9)
• pch_gbe_mac_set_wol_event(9)
• pch_gbe_mac_ctrl_miim(9)
• pch_gbe_mac_set_pause_packet(9)
• pch_gbe_alloc_queues(9)
• pch_gbe_init_stats(9)
• pch_gbe_init_phy(9)
• pch_gbe_mdio_read(9)
• pch_gbe_mdio_write(9)
• pch_gbe_reset_task(9)
• pch_gbe_reinit_locked(9)
• pch_gbe_reset(9)
• pch_gbe_free_irq(9)
• pch_gbe_irq_disable(9)
• pch_gbe_irq_enable(9)
• pch_gbe_configure_tx(9)
• pch_gbe_setup_rctl(9)
• pch_gbe_configure_rx(9)
• pch_gbe_unmap_and_free_tx_resource(9)
• pch_gbe_unmap_and_free_rx_resource(9)
• pch_gbe_clean_tx_ring(9)
• pch_gbe_clean_rx_ring(9)
• pch_gbe_watchdog(9)
• pch_gbe_tx_queue(9)
• pch_gbe_update_stats(9)
• pch_gbe_intr(9)
• pch_gbe_alloc_rx_buffers(9)
• pch_gbe_alloc_tx_buffers(9)
• pch_gbe_clean_tx(9)
• pch_gbe_clean_rx(9)
• pch_gbe_setup_tx_resources(9)
• pch_gbe_setup_rx_resources(9)
• pch_gbe_free_tx_resources(9)
• pch_gbe_free_rx_resources(9)
• pch_gbe_request_irq(9)
• pch_gbe_up(9)
• pch_gbe_down(9)
• pch_gbe_sw_init(9)
• pch_gbe_open(9)
• pch_gbe_stop(9)
• pch_gbe_xmit_frame(9)
• pch_gbe_set_multi(9)
• pch_gbe_set_mac(9)
• pch_gbe_change_mtu(9)
• pch_gbe_set_features(9)
• pch_gbe_ioctl(9)
• pch_gbe_tx_timeout(9)
• pch_gbe_napi_poll(9)
• pch_gbe_netpoll(9)

bestie the roster is long. that's 53 entries plus the kernel file path, and every single one of them made the list. no one got cut. iykyk. 👑

---

and that's the whole page, bestie 💜 — short, sweet, and it did not waste a single line. this one came out of ./drivers/net/ethernet/oki-sem... and it's dated October 2026, stamped with pch_gbe_setup_tctl(9) all pretty at the bottom. go configure those Transmit control registers, you absolute icon. 🦋✨