📦 linux-manual

82568 pages · page 181 of 413

I (continued)

ixd_adapter_fill_dflt_ctlqs(9)Find default control queues and store them✨
ixd_check_reset_complete(9)Check if the PFR reset is completed✨
ixd_ctlq_clean_sq(9)Clean the send control queue after sending the message✨
ixd_ctlq_do_req(9)Perform a standard virtchnl request✨
ixd_ctlq_handle_msg(9)Default control queue message handler✨
ixd_ctlq_init_sparams(9)Initialize control queue send parameters✨
ixd_ctlq_recv_mb_msg(9)Receive a potential message over mailbox periodically✨
ixd_ctlq_reg_init(9)Initialize default mailbox registers✨
ixd_ctlq_rx_task(9)Periodically check for mailbox responses and events✨
ixd_deinit_dflt_mbx(9)Deinitialize default mailbox✨
ixd_devlink_free(9)teardown the devlink✨
ixd_devlink_info_get(9).info_get devlink handler✨
ixd_devlink_register(9)Register devlink interface for this adapter✨
ixd_devlink_unregister(9)Unregister devlink for this adapter.✨
ixd_fill_device_name(9)Get the name of the underlying hardware✨
ixd_fill_dsn(9)Get the serial number for the ixd device✨
ixd_get_vc_ver(9)Get version info from adapter✨
ixd_handle_caps(9)Handle VIRTCHNL2_OP_GET_CAPS response✨
ixd_handle_vc_ver(9)Handle VIRTCHNL2_OP_VERSION response✨
ixd_init_ctlq_create_info(9)Initialize control queue info for creation✨
ixd_init_dflt_mbx(9)Setup default mailbox parameters and make request✨
ixd_init_libie_xn_params(9)Initialize xn transaction manager creation info✨
ixd_init_task(9)Initialize after reset✨
ixd_iomap_regions(9)iomap PCI BARs✨
ixd_probe(9)probe a CPF PCI device✨
ixd_remove(9)remove a CPF PCI device✨
ixd_req_vc_caps(9)Request and save device capability✨
ixd_req_vc_version(9)Request and save Virtchannel2 version✨
ixd_shutdown(9)shut down a CPF PCI device✨
ixd_to_dev(9)Get the corresponding device struct from an adapter✨
ixd_trigger_reset(9)Trigger PFR reset✨
ixd_vc_can_handle_msg(9)Decide if an event has to be handled by virtchnl code✨
ixd_vc_dev_init(9)virtchnl device core initialization✨
ixd_vc_recv_event_msg(9)Handle virtchnl event message✨
ixgbe_aci_check_event_pending(9)check if there are any pending events✨
ixgbe_aci_disable_rxen(9)disable RX✨
ixgbe_aci_erase_nvm(9)erase NVM sector✨
ixgbe_aci_event_cleanup(9)release msg_buf memory✨
ixgbe_aci_get_event(9)get an event from ACI✨
ixgbe_aci_get_fw_ver(9)Get the firmware version✨
ixgbe_aci_get_link_info(9)get the link status✨
ixgbe_aci_get_netlist_node(9)get a node handle✨
ixgbe_aci_get_phy_caps(9)returns PHY capabilities✨
ixgbe_aci_list_caps(9)query function/device capabilities✨
ixgbe_aci_nvm_update_empr(9)update NVM using EMPR✨
ixgbe_aci_read_nvm(9)read NVM✨
ixgbe_aci_release_res(9)release a common resource using ACI✨
ixgbe_aci_req_res(9)request a common resource✨
ixgbe_aci_send_cmd(9)send FW Admin Command to FW Admin Command Interface✨
ixgbe_aci_send_cmd_execute(9)execute sending FW Admin Command to FW Admin Command Interface✨
ixgbe_aci_set_event_mask(9)set event mask✨
ixgbe_aci_set_link_restart_an(9)set up link and restart AN✨
ixgbe_aci_set_phy_cfg(9)set PHY configuration✨
ixgbe_aci_set_port_id_led(9)set LED value for the given port✨
ixgbe_aci_update_nvm(9)update NVM✨
ixgbe_acquire_eeprom(9)Acquire EEPROM using bit-bang✨
ixgbe_acquire_msix_vectors(9)acquire MSI-X vectors✨
ixgbe_acquire_nvm(9)Generic request for acquiring the NVM ownership✨
ixgbe_acquire_res(9)acquire the ownership of a resource✨
ixgbe_acquire_swfw_sync(9)Acquire SWFW semaphore✨
ixgbe_acquire_swfw_sync_X540(9)Acquire SWFW semaphore✨
ixgbe_acquire_swfw_sync_X550em(9)Acquire SWFW semaphore✨
ixgbe_acquire_swfw_sync_x550em_a(9)Acquire SWFW semaphore✨
ixgbe_add_hwmon_attr(9)Create hwmon attr table for a hwmon sysfs file.✨
ixgbe_add_rx_frag(9)Add contents of Rx buffer to sk_buff✨
ixgbe_add_sanmac_netdev(9)Add the SAN MAC address to the corresponding netdev->dev_addrs✨
ixgbe_alloc_q_vector(9)Allocate memory for a single interrupt vector✨
ixgbe_alloc_q_vectors(9)Allocate memory for interrupt vectors✨
ixgbe_alloc_rx_buffers(9)Replace used receive buffers✨
ixgbe_allocate_devlink(9)Allocate devlink instance✨
ixgbe_atr_compute_perfect_hash_82599(9)Compute the perfect filter hash✨
ixgbe_atr_compute_sig_hash_82599(9)Compute the signature hash✨
ixgbe_blink_led_start_generic(9)Blink LED based on index.✨
ixgbe_blink_led_start_X540(9)Blink LED based on index.✨
ixgbe_blink_led_stop_generic(9)Stop blinking LED based on index.✨
ixgbe_blink_led_stop_X540(9)Stop blinking LED based on index.✨
ixgbe_cache_ring_dcb(9)Descriptor ring to register mapping for DCB✨
ixgbe_cache_ring_dcb_sriov(9)Descriptor ring to register mapping for SR- IOV✨
ixgbe_cache_ring_register(9)Descriptor ring to register mapping✨
ixgbe_cache_ring_rss(9)Descriptor ring to register mapping for RSS✨
ixgbe_cache_ring_sriov(9)Descriptor ring to register mapping for sriov✨
ixgbe_calc_eeprom_checksum_generic(9)Calculates and returns the checksum✨
ixgbe_calc_eeprom_checksum_X540(9)Calculates and returns the checksum✨
ixgbe_calculate_checksum(9)Calculate checksum for buffer✨
ixgbe_cancel_pending_update(9)Cancel any pending update for a component✨
ixgbe_cfg_phy_fc(9)Configure PHY Flow Control (FC) data based on FC mode✨
ixgbe_change_mtu(9)Change the Maximum Transfer Unit✨
ixgbe_check_component_response(9)Report firmware response to a component✨
ixgbe_check_cs4227(9)Check CS4227 and reset as needed✨
ixgbe_check_for_ack(9)checks to see if someone sent us ACK✨
ixgbe_check_for_ack_pf(9)checks to see if the VF has ACKed✨
ixgbe_check_for_msg(9)checks to see if someone sent us mail✨
ixgbe_check_for_msg_pf(9)checks to see if the VF has sent mail✨
ixgbe_check_for_rst(9)checks to see if other side has reset✨
ixgbe_check_for_rst_pf(9)checks to see if the VF has reset✨
ixgbe_check_fw_error(9)Check firmware for errors✨
ixgbe_check_hang_subtask(9)check for hung queues and dropped interrupts✨
ixgbe_check_illegal_queue(9)search for queue with illegal packet✨
ixgbe_check_link_cfg_err(9)check if link configuration failed✨
ixgbe_check_link_e610(9)Determine link and speed status✨
ixgbe_check_mac_link_82598(9)Get link/speed status✨
ixgbe_check_mac_link_generic(9)Determine link and speed status✨
ixgbe_check_mdd_event(9)check for MDD event on all VFs✨
ixgbe_check_media_subtask(9)check for media✨
ixgbe_check_module_power(9)check module power level✨
ixgbe_check_overtemp_fw(9)Check firmware-controlled PHYs for overtemp✨
ixgbe_check_overtemp_subtask(9)check for over temperature✨
ixgbe_check_phy_fw_load(9)check if PHY FW load failed✨
ixgbe_check_phy_link_tnx(9)Determine link and speed status✨
ixgbe_check_reset_blocked(9)check status of MNG FW veto bit✨
ixgbe_clean_all_rx_rings(9)Free Rx Buffers for all queues✨
ixgbe_clean_all_tx_rings(9)Free Tx Buffers for all queues✨
ixgbe_clean_rx_irq(9)Clean completed descriptors from Rx ring - bounce buf✨
ixgbe_clean_rx_ring(9)Free Rx Buffers per Queue✨
ixgbe_clean_tx_irq(9)Reclaim resources after transmit completes✨
ixgbe_clean_tx_ring(9)Free Tx Buffers✨
ixgbe_cleanup_headers(9)Correct corrupted or empty headers✨
ixgbe_clear_hw_cntrs_generic(9)Generic clear hardware counters✨
ixgbe_clear_interrupt_scheme(9)Clear the current interrupt scheme settings✨
ixgbe_clear_rar_generic(9)Remove Rx address register✨
ixgbe_clear_tx_pending(9)Clear pending TX work from the PCIe fifo✨
ixgbe_clear_vf_stats_counters(9)Clear out VF stats after reset✨
ixgbe_clear_vfta_82598(9)Clear VLAN filter table✨
ixgbe_clear_vfta_generic(9)Clear VLAN filter table✨
ixgbe_clear_vmdq_82598(9)Disassociate a VMDq set index from an rx address✨
ixgbe_clear_vmdq_generic(9)Disassociate a VMDq pool index from a rx address✨
ixgbe_clock_in_i2c_bit(9)Clocks in one bit via I2C data/clock✨
ixgbe_clock_in_i2c_byte(9)Clocks in one byte via I2C✨
ixgbe_clock_out_i2c_bit(9)Clocks in/out one bit via I2C data/clock✨
ixgbe_clock_out_i2c_byte(9)Clocks out one byte via I2C✨
ixgbe_close(9)Disables a network interface✨
ixgbe_configure_bridge_mode(9)set various bridge modes✨
ixgbe_configure_dcb(9)Configure DCB hardware✨
ixgbe_configure_fcoe(9)configures registers for fcoe at start✨
ixgbe_configure_lse(9)enable/disable link status events✨
ixgbe_configure_msi_and_legacy(9)Initialize PIN (INTA...) and MSI interrupts✨
ixgbe_configure_msix(9)Configure MSI-X hardware✨
ixgbe_configure_rscctl(9)enable RSC for the indicated ring✨
ixgbe_configure_rx(9)Configure 8259x Receive Unit after Reset✨
ixgbe_configure_tx(9)Configure 8259x Transmit Unit after Reset✨
ixgbe_configure_tx_ring(9)Configure 8259x Tx ring after Reset✨
ixgbe_copy_phy_caps_to_cfg(9)Copy PHY ability data to configuration data✨
ixgbe_dbg_adapter_exit(9)clear out the adapter's debugfs entries✨
ixgbe_dbg_adapter_init(9)setup the debugfs directory for the adapter✨
ixgbe_dbg_exit(9)clean out the driver's debugfs entries✨
ixgbe_dbg_init(9)start up debugfs for the driver✨
ixgbe_dbg_netdev_ops_read(9)read for netdev_ops datum✨
ixgbe_dbg_netdev_ops_write(9)write into netdev_ops datum✨
ixgbe_dbg_reg_ops_read(9)read for reg_ops datum✨
ixgbe_dbg_reg_ops_write(9)write into reg_ops datum✨
ixgbe_dcb_calculate_tc_credits(9)Calculates traffic class credits✨
ixgbe_dcb_config_pfc_82598(9)Config priority flow control✨
ixgbe_dcb_config_pfc_82599(9)Configure priority flow control✨
ixgbe_dcb_config_rx_arbiter_82598(9)Config Rx data arbiter✨
ixgbe_dcb_config_rx_arbiter_82599(9)Config Rx Data arbiter✨
ixgbe_dcb_config_tc_stats_82598(9)Configure traffic class statistics✨
ixgbe_dcb_config_tc_stats_82599(9)Config traffic class statistics✨
ixgbe_dcb_config_tx_data_arbiter_82598(9)Config Tx data arbiter✨
ixgbe_dcb_config_tx_data_arbiter_82599(9)Config Tx Data arbiter✨
ixgbe_dcb_config_tx_desc_arbiter_82598(9)Config Tx Desc. arbiter✨
ixgbe_dcb_config_tx_desc_arbiter_82599(9)Config Tx Desc. arbiter✨
ixgbe_dcb_hw_config(9)Config and enable DCB✨
ixgbe_dcb_hw_config_82598(9)Config and enable DCB✨
ixgbe_dcb_hw_config_82599(9)Configure and enable DCB✨
ixgbe_dcbnl_getapp(9)retrieve the DCBX application user priority✨
ixgbe_del_sanmac_netdev(9)Removes the SAN MAC address to the corresponding netdev->dev_addrs✨
ixgbe_detect_eeprom_page_size_generic(9)Detect EEPROM page size✨
ixgbe_determine_active_flash_banks(9)Discover active bank for each module✨
ixgbe_device_supports_autoneg_fc(9)Check if phy supports autoneg flow control✨
ixgbe_devlink_destroy_regions(9)Destroy devlink regions✨
ixgbe_devlink_devcaps_snapshot(9)Capture a snapshot of device capabilities✨
ixgbe_devlink_init_regions(9)Initialize devlink regions✨
ixgbe_devlink_nvm_read(9)Read a portion of NVM flash content✨
ixgbe_devlink_nvm_snapshot(9)Capture a snapshot of the NVM content✨
ixgbe_devlink_register_port(9)Register devlink port✨
ixgbe_devlink_reload_empr_finish(9)finishes EMP reset✨
ixgbe_devlink_reload_empr_start(9)Start EMP reset to activate new firmware✨
ixgbe_devlink_set_switch_id(9)Set unique switch ID based on PCI DSN✨
ixgbe_disable_link_status_events(9)disable link status events✨
ixgbe_disable_mc_generic(9)Disable multicast address in RAR✨
ixgbe_disable_mdd_x550(9)disable malicious driver detection✨
ixgbe_disable_pcie_primary(9)Disable PCI-express primary access✨
ixgbe_disable_rx_buff_generic(9)Stops the receive data path✨
ixgbe_disable_rx_e610(9)Disable RX unit✨
ixgbe_disable_tx_laser_multispeed_fiber(9)Disable Tx laser✨
ixgbe_discover_dev_caps(9)Read and extract device capabilities✨
ixgbe_discover_flash_size(9)Discover the available flash size✨
ixgbe_discover_func_caps(9)Read and extract function capabilities✨
ixgbe_dma_sync_frag(9)perform DMA sync for first frag of SKB✨
ixgbe_enable_lasi_ext_t_x550em(9)Enable external Base T PHY interrupts✨
ixgbe_enable_link_status_events(9)enable link status events✨
ixgbe_enable_mc_generic(9)Enable multicast address in RAR✨
ixgbe_enable_mdd_x550(9)enable malicious driver detection✨
ixgbe_enable_rx_buff_generic(9)Enables the receive data path✨
ixgbe_enable_rx_dma_82599(9)Enable the Rx DMA unit on 82599✨
ixgbe_enable_rx_dma_generic(9)Enable the Rx DMA unit✨
ixgbe_enable_tx_laser_multispeed_fiber(9)Enable Tx laser✨
ixgbe_enter_lplu_e610(9)Transition to low power states✨
ixgbe_enumerate_functions(9)Get the number of ports this device has✨
ixgbe_erase_nvm_module(9)Erase an NVM module and await firmware completion✨