📦 linux-manual

82568 pages · page 183 of 413

I (continued)

ixgbe_out_i2c_byte_ack(9)Send I2C byte with ack✨
ixgbe_parse_dev_caps(9)Parse device capabilities✨
ixgbe_parse_e610_caps(9)Parse common device/function capabilities✨
ixgbe_parse_fdir_dev_caps(9)Parse LIBIE_AQC_CAPS_FD device caps✨
ixgbe_parse_func_caps(9)Parse function capabilities✨
ixgbe_parse_valid_functions_cap(9)Parse LIBIE_AQC_CAPS_VALID_FUNCTIONS caps✨
ixgbe_parse_vf_dev_caps(9)Parse LIBIE_AQC_CAPS_VF device caps✨
ixgbe_parse_vf_func_caps(9)Parse LIBIE_AQC_CAPS_VF function caps✨
ixgbe_parse_vsi_dev_caps(9)Parse LIBIE_AQC_CAPS_VSI device caps✨
ixgbe_parse_vsi_func_caps(9)Parse LIBIE_AQC_CAPS_VSI function caps✨
ixgbe_pcie_from_parent(9)Determine whether PCIe info should come from parent✨
ixgbe_pcie_timeout_poll(9)Return number of times to poll for completion✨
ixgbe_pf_handle_tx_hang(9)handle Tx hang on PF✨
ixgbe_poll(9)NAPI Rx polling callback✨
ixgbe_poll_eerd_eewr_done(9)Poll EERD read or EEWR write status✨
ixgbe_poll_flash_update_done_X540(9)Poll flash update status✨
ixgbe_poll_for_ack(9)Wait for message acknowledgement✨
ixgbe_poll_for_msg(9)Wait for message notification✨
ixgbe_probe(9)Device Initialization Routine✨
ixgbe_probe_phy(9)Probe a single address for a PHY✨
ixgbe_process_link_status_event(9)process the link event✨
ixgbe_process_skb_fields(9)Populate skb header fields from Rx descriptor✨
ixgbe_ptp_adjfine_82599(9)✨
ixgbe_ptp_adjfine_X550(9)✨
ixgbe_ptp_adjtime(9)✨
ixgbe_ptp_check_pps_event(9)✨
ixgbe_ptp_clear_tx_timestamp(9)utility function to clear Tx timestamp state✨
ixgbe_ptp_convert_to_hwtstamp(9)convert register value to hw timestamp✨
ixgbe_ptp_create_clock(9)✨
ixgbe_ptp_feature_enable(9)✨
ixgbe_ptp_gettimex(9)✨
ixgbe_ptp_hwtstamp_get(9)get current hardware timestamping configuration✨
ixgbe_ptp_hwtstamp_set(9)user entry point for timestamp mode✨
ixgbe_ptp_init(9)✨
ixgbe_ptp_init_systime(9)Initialize SYSTIME registers✨
ixgbe_ptp_overflow_check(9)watchdog task to detect SYSTIME overflow✨
ixgbe_ptp_read_82599(9)read raw cycle counter (to be used by time counter)✨
ixgbe_ptp_read_X550(9)read cycle counter value✨
ixgbe_ptp_reset(9)✨
ixgbe_ptp_rx_hang(9)detect error case when Rx timestamp registers latched✨
ixgbe_ptp_rx_pktstamp(9)utility function to get RX time stamp from buffer✨
ixgbe_ptp_rx_rgtstamp(9)utility function which checks for RX time stamp✨
ixgbe_ptp_set_timestamp_mode(9)setup the hardware for the requested mode✨
ixgbe_ptp_settime(9)✨
ixgbe_ptp_setup_sdp_X540(9)✨
ixgbe_ptp_setup_sdp_X550(9)✨
ixgbe_ptp_start_cyclecounter(9)create the cycle counter from hw✨
ixgbe_ptp_stop(9)close the PTP device✨
ixgbe_ptp_suspend(9)stop PTP work items✨
ixgbe_ptp_tx_hang(9)detect error case where Tx timestamp never finishes✨
ixgbe_ptp_tx_hwtstamp(9)utility function which checks for TX time stamp✨
ixgbe_ptp_tx_hwtstamp_work(9)✨
ixgbe_pull_tail(9)ixgbe specific version of skb_pull_tail✨
ixgbe_put_phy_token(9)Put the token for shared PHY access✨
ixgbe_raise_eeprom_clk(9)Raises the EEPROM's clock input.✨
ixgbe_raise_i2c_clk(9)Raises the I2C SCL clock✨
ixgbe_read_analog_reg8_82598(9)Reads 8 bit Atlas analog register✨
ixgbe_read_analog_reg8_82599(9)Reads 8 bit Omer analog register✨
ixgbe_read_cs4227(9)Read CS4227 register✨
ixgbe_read_ee_aci_buffer_e610(9)Read EEPROM words via ACI✨
ixgbe_read_ee_aci_e610(9)Read EEPROM word using the admin command.✨
ixgbe_read_eeprom_82599(9)Read EEPROM word using fastest available method✨
ixgbe_read_eeprom_bit_bang_generic(9)Read EEPROM word using bit-bang✨
ixgbe_read_eeprom_buffer_82599(9)Read EEPROM word(s) using fastest available method✨
ixgbe_read_eeprom_buffer_bit_bang(9)Read EEPROM using bit-bang✨
ixgbe_read_eeprom_buffer_bit_bang_generic(9)Read EEPROM using bit-bang✨
ixgbe_read_eerd_buffer_generic(9)Read EEPROM word(s) using EERD✨
ixgbe_read_eerd_buffer_X540(9)Read EEPROM word(s) using EERD✨
ixgbe_read_eerd_generic(9)Read EEPROM word using EERD✨
ixgbe_read_eerd_X540(9)Read EEPROM word using EERD✨
ixgbe_read_flash_module(9)Read a word from one of the main NVM modules✨
ixgbe_read_flat_nvm(9)Read portion of NVM by flat offset✨
ixgbe_read_i2c_byte_82599(9)Reads 8 bit word over I2C✨
ixgbe_read_i2c_byte_generic(9)Reads 8 bit word over I2C✨
ixgbe_read_i2c_byte_generic_int(9)Reads 8 bit word over I2C✨
ixgbe_read_i2c_byte_generic_unlocked(9)Reads 8 bit word over I2C✨
ixgbe_read_i2c_combined_generic(9)Perform I2C read combined operation✨
ixgbe_read_i2c_combined_generic_int(9)Perform I2C read combined operation✨
ixgbe_read_i2c_combined_generic_unlocked(9)Do I2C read combined operation✨
ixgbe_read_i2c_eeprom_82598(9)Reads 8 bit word over I2C interface.✨
ixgbe_read_i2c_eeprom_generic(9)Reads 8 bit EEPROM word over I2C interface✨
ixgbe_read_i2c_phy_82598(9)Reads 8 bit word over I2C interface.✨
ixgbe_read_i2c_sff8472_82598(9)Reads 8 bit word over I2C interface.✨
ixgbe_read_i2c_sff8472_generic(9)Reads 8 bit word over I2C interface✨
ixgbe_read_iosf_sb_reg_x550a(9)Read from IOSF PHY register✨
ixgbe_read_mbx(9)Reads a message from the mailbox✨
ixgbe_read_mbx_pf(9)Read a message from the mailbox✨
ixgbe_read_mng_if_sel_x550em(9)Read NW_MNG_IF_SEL register✨
ixgbe_read_netlist_module(9)Read data from the netlist module area✨
ixgbe_read_nvm_module(9)Read from the active main NVM module✨
ixgbe_read_nvm_sr_copy(9)Read a word from the Shadow RAM copy✨
ixgbe_read_orom_module(9)Read from the active Option ROM module✨
ixgbe_read_pba_string_e610(9)Read PBA string from NVM✨
ixgbe_read_pba_string_generic(9)Reads part number string from EEPROM✨
ixgbe_read_pe(9)Read register from port expander✨
ixgbe_read_phy_reg_generic(9)Reads a value from a specified PHY register using the SWFW lock - this function is needed in most cases✨
ixgbe_read_phy_reg_mdi(9)read PHY register✨
ixgbe_read_phy_reg_x550a(9)Reads specified PHY register✨
ixgbe_read_posted_mbx(9)Wait for message notification and receive message✨
ixgbe_read_reg(9)Read from device register✨
ixgbe_read_sr_area_size(9)Read an area size from a Shadow RAM word✨
ixgbe_read_sr_base_address(9)Read the value of a Shadow RAM pointer word✨
ixgbe_read_sr_buf_aci(9)Read Shadow RAM buffer via ACI✨
ixgbe_read_sr_word_aci(9)Reads Shadow RAM via ACI✨
ixgbe_read_vflinks(9)Read VFLINKS register✨
ixgbe_ready_eeprom(9)Polls for EEPROM ready✨
ixgbe_recovery_probe(9)Handle FW recovery mode during probe✨
ixgbe_reinit_fdir_tables_82599(9)Reinitialize Flow Director tables.✨
ixgbe_release_eeprom(9)Release EEPROM, release semaphores✨
ixgbe_release_eeprom_semaphore(9)Release hardware semaphore✨
ixgbe_release_nvm(9)Generic request for releasing the NVM ownership✨
ixgbe_release_res(9)release a common resource✨
ixgbe_release_swfw_sync(9)Release SWFW semaphore✨
ixgbe_release_swfw_sync_semaphore(9)Release hardware semaphore✨
ixgbe_release_swfw_sync_X540(9)Release SWFW semaphore✨
ixgbe_release_swfw_sync_X550em(9)Release SWFW semaphore✨
ixgbe_release_swfw_sync_x550em_a(9)Release SWFW semaphore✨
ixgbe_remove(9)Device Removal Routine✨
ixgbe_request_irq(9)initialize interrupts✨
ixgbe_request_msix_irqs(9)Initialize MSI-X interrupts✨
ixgbe_reset_cs4227(9)Reset CS4227 using port expander✨
ixgbe_reset_hw_82598(9)Performs hardware reset✨
ixgbe_reset_hw_82599(9)Perform hardware reset✨
ixgbe_reset_hw_e610(9)Perform hardware reset✨
ixgbe_reset_hw_X540(9)Perform hardware reset✨
ixgbe_reset_phy_fw(9)Reset firmware-controlled PHYs✨
ixgbe_reset_phy_generic(9)Performs a PHY reset✨
ixgbe_reset_phy_nl(9)Performs a PHY reset✨
ixgbe_reset_pipeline_82599(9)perform pipeline reset✨
ixgbe_restart_an_internal_phy_x550em(9)restart autonegotiation for the internal PHY✨
ixgbe_restore_mdd_vf_x550(9)restore VF that was disabled during MDD event✨
ixgbe_reuse_rx_page(9)page flip buffer and store it back on the ring✨
ixgbe_rss_indir_tbl_entries(9)Return RSS indirection table entries✨
ixgbe_rx_checksum(9)indicate in skb if hw indicated a good cksum✨
ixgbe_rx_is_fcoe(9)check the rx desc for incoming pkt type✨
ixgbe_schedule_fw_event(9)schedule Firmware event✨
ixgbe_send_component_table(9)Send PLDM component table to firmware✨
ixgbe_send_package_data(9)Send record package data to firmware✨
ixgbe_send_vf_link_status(9)send link status data to VF✨
ixgbe_service_task(9)manages and runs subtasks✨
ixgbe_service_timer(9)Timer Call-back✨
ixgbe_set_all_vfs(9)update vfs queues✨
ixgbe_set_dcb_sriov_queues(9)Allocate queues for SR-IOV devices w/ DCB✨
ixgbe_set_eee_capable(9)helper function to determine EEE support on X550 and E610✨
ixgbe_set_fw_drv_ver_generic(9)Sends driver version to firmware✨
ixgbe_set_fw_drv_ver_x550(9)Sends driver version to firmware✨
ixgbe_set_fw_version(9)Set FW version✨
ixgbe_set_fw_version_e610(9)Set FW version specifically on E610 adapters✨
ixgbe_set_hard_rate_select_speed(9)Set module link speed✨
ixgbe_set_i2c_data(9)Sets the I2C data bit✨
ixgbe_set_interrupt_capability(9)set MSI-X or MSI if supported✨
ixgbe_set_ivar(9)set the IVAR registers, mapping interrupt causes to vectors✨
ixgbe_set_lan_id_multi_port_pcie(9)Set LAN id for PCIe multiple port devices✨
ixgbe_set_lan_id_multi_port_pcie_82598(9)Set LAN id for PCIe multiple port devices.✨
ixgbe_set_mac(9)Change the Ethernet Address of the NIC✨
ixgbe_set_mac_anti_spoofing(9)Enable/Disable MAC anti-spoofing✨
ixgbe_set_mdio_speed(9)Set MDIO clock speed✨
ixgbe_set_mta(9)Set bit-vector in multicast table✨
ixgbe_set_mux(9)Set mux for port 1 access with CS4227✨
ixgbe_set_num_queues(9)Allocate queues for device, feature dependent✨
ixgbe_set_pcie_completion_timeout(9)set pci-e completion timeout✨
ixgbe_set_phy_power_e610(9)Control power for copper PHY✨
ixgbe_set_prio_tc_map(9)Configure netdev prio tc map✨
ixgbe_set_rar_generic(9)Set Rx address register✨
ixgbe_set_rss_queues(9)Allocate queues for RSS✨
ixgbe_set_rx_mode(9)Unicast, Multicast and Promiscuous mode set✨
ixgbe_set_rxpba_82598(9)Initialize RX packet buffer✨
ixgbe_set_rxpba_generic(9)Initialize RX packet buffer✨
ixgbe_set_soft_rate_select_speed(9)Set module link speed✨
ixgbe_set_sriov_queues(9)Allocate queues for SR-IOV devices✨
ixgbe_set_vf_link_state(9)Set link state✨
ixgbe_set_vf_rx_tx(9)Set VF rx tx✨
ixgbe_set_vfta_82598(9)Set VLAN filter table✨
ixgbe_set_vfta_generic(9)Set VLAN filter table✨
ixgbe_set_vlan_anti_spoofing(9)Enable/Disable VLAN anti-spoofing✨
ixgbe_set_vmdq_82598(9)Associate a VMDq set index with a rx address✨
ixgbe_set_vmdq_generic(9)Associate a VMDq pool index with a rx address✨
ixgbe_set_vmdq_san_mac_generic(9)Associate VMDq pool index with a rx address✨
ixgbe_setup_all_rx_resources(9)allocate all queues Rx resources✨
ixgbe_setup_all_tx_resources(9)allocate all queues Tx resources✨
ixgbe_setup_copper_link_82598(9)Set the PHY autoneg advertised field✨
ixgbe_setup_copper_link_82599(9)Set the PHY autoneg advertised field✨
ixgbe_setup_eee_e610(9)Enable/disable EEE support✨
ixgbe_setup_fc_backplane_x550em_a(9)Set up flow control✨
ixgbe_setup_fc_e610(9)Set up flow control✨
ixgbe_setup_fc_generic(9)Set up flow control✨
ixgbe_setup_fc_x550em(9)Set up flow control✨
ixgbe_setup_fcoe_ddp_resources(9)setup all fcoe ddp context resources✨
ixgbe_setup_fw_link(9)Setup firmware-controlled PHYs✨
ixgbe_setup_ixfi_x550em_x(9)MAC specific iXFI configuration✨
ixgbe_setup_kr_speed_x550em(9)Configure the KR PHY for link speed.✨
ixgbe_setup_kr_x550em(9)Configure the KR PHY✨
ixgbe_setup_link_e610(9)Set up link✨
ixgbe_setup_mac_link_82598(9)Set MAC link speed✨
ixgbe_setup_mac_link_82599(9)Set MAC link speed✨
ixgbe_setup_mac_link_multispeed_fiber(9)Set MAC link speed✨
ixgbe_setup_mac_link_sfp_n(9)Setup internal PHY for native SFP✨
ixgbe_setup_mac_link_sfp_x550a(9)Setup internal PHY for SFP✨
ixgbe_setup_mac_link_sfp_x550em(9)Configure the KR PHY for SFP.✨
ixgbe_setup_mac_link_smartspeed(9)Set MAC link speed using SmartSpeed✨