section 9 · Kernel routines 🧠

87928 pages · page 62 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

C (continued)

cxgb4_ptp_gettime(9)Reads the current time from the hardware clock✨
cxgb4_ptp_init(9)initialize PTP for devices which support it✨
cxgb4_ptp_is_ptp_rx(9)determine whether RX packet is PTP or not✨
cxgb4_ptp_is_ptp_tx(9)determine whether TX packet is PTP or not✨
cxgb4_ptp_read_hwstamp(9)read timestamp for TX event PTP message✨
cxgb4_ptp_settime(9)Set the current time on the hardware clock✨
cxgb4_ptp_stop(9)disable PTP device and stop the overflow check✨
cxgb4_ptprx_timestamping(9)Enable Timestamp for RX PTP event message✨
cxgb4_reclaim_completed_tx(9)reclaims completed Tx descriptors✨
cxgb4_ring_tx_db(9)check and potentially ring a Tx queue's doorbell✨
cxgb4_sched_class_alloc(9)allocate a scheduling class✨
cxgb4_sched_class_bind(9)Bind an entity to a scheduling class✨
cxgb4_sched_class_free(9)free a scheduling class✨
cxgb4_sched_class_unbind(9)Unbind an entity from a scheduling class✨
cxgb4_set_rspq_intr_params(9)set a queue's interrupt holdoff parameters✨
cxgb4_sgetim_to_hwtstamp(9)convert sge time stamp to hw time stamp✨
cxgb4_smt_alloc_switching(9)Allocates an SMT entry for switch filters.✨
cxgb4_smt_release(9)Release SMT entry✨
cxgb4_unregister_uld(9)unregister an upper-layer driver✨
cxgb4_vf_eth_xmit(9)add a packet to an Ethernet TX queue✨
cxgb4_write_rss(9)write the RSS table for a given port✨
cxgb4_write_sgl(9)populate a scatter/gather list for a packet✨
cxgb4vf_change_mac(9)Update match filter for a MAC address.✨
cxgb4vf_get_port_mask(9)Get port mask for the VF based on mac address stored on the adapter✨
cxgb_fcoe_disable(9)disable FCoE offload✨
cxgb_fcoe_enable(9)enable FCoE offload features✨
cxgb_up(9)enable the adapter✨
cxl core(9)✨
cxl core hdm(9)✨
cxl core pci(9)✨
cxl core region(9)✨
cxl features(9)✨
cxl mbox(9)✨
cxl mem(9)✨
cxl objects(9)✨
cxl pci(9)✨
cxl pmem(9)✨
cxl port(9)✨
cxl registers(9)✨
cxl_acpi_evaluate_qtg_dsm(9)Retrieve QTG ids via ACPI _DSM✨
cxl_add_ep(9)register an endpoint's interest in a port✨
cxl_calc_interleave_pos(9)calculate an endpoint position in a region✨
cxl_coordinates_combine(9)Combine the two input coordinates✨
cxl_count_regblock(9)Count instances of a given regblock type.✨
cxl_decoder_add(9)Add a decoder with targets✨
cxl_decoder_add_locked(9)Add a decoder with targets✨
cxl_decoder_init(9)Common decoder setup / initialization✨
cxl_dev_state_identify(9)Send the IDENTIFY command to the device.✨
cxl_endpoint_decoder_alloc(9)Allocate an endpoint decoder✨
cxl_endpoint_gather_bandwidth(9)collect all the endpoint bandwidth in an xarray✨
cxl_endpoint_get_perf_coordinates(9)Retrieve performance numbers stored in dports of CXL path✨
cxl_enumerate_cmds(9)Enumerate commands for a device.✨
cxl_find_nvdimm_bridge(9)find a bridge device relative to a port✨
cxl_find_regblock(9)Locate register blocks by type✨
cxl_find_regblock_instance(9)Locate a register block by type / index✨
cxl_hb_gather_bandwidth(9)handle the host bridge level bandwidth collection✨
cxl_hdm_decode_init(9)Setup HDM decoding for the endpoint✨
cxl_internal_send_cmd(9)Kernel internal interface to send a mailbox command✨
cxl_mem_abort_fw_xfer(9)Abort an in-progress FW transfer✨
cxl_mem_activate_fw(9)Activate Firmware✨
cxl_mem_get_event_records(9)Get Event Records from the device✨
cxl_mem_get_fw_info(9)Get Firmware info✨
cxl_mem_get_partition_info(9)Get partition info✨
cxl_mem_sanitize(9)Send a sanitization command to the device.✨
cxl_payload_from_user_allowed(9)Check contents of in_payload.✨
cxl_pci_get_latency(9)calculate the link latency for the PCIe link✨
cxl_port_attach_region(9)track a region's interest in a port by endpoint✨
cxl_port_pick_region_decoder(9)assign or lookup a decoder for a region✨
cxl_probe_component_regs(9)Detect CXL Component register blocks✨
cxl_probe_device_regs(9)Detect CXL Device register blocks✨
cxl_region_shared_upstream_bandwidth_update(9)Recalculate the bandwidth for the region✨
cxl_region_update_bandwidth(9)Update the bandwidth access coordinates of a region✨
cxl_root_decoder_alloc(9)Allocate a root level decoder✨
cxl_rp_gather_bandwidth(9)handle the root port level bandwidth collection✨
cxl_set_capacity(9)initialize dpa by a driver without a mailbox.✨
cxl_switch_decoder_alloc(9)Allocate a switch level decoder✨
cxl_switch_gather_bandwidth(9)collect all the bandwidth at switch level in an xarray✨
cxl_validate_cmd_from_user(9)Check fields for CXL_MEM_SEND_COMMAND.✨
cxl_validate_translation_params(9)✨
cxl_walk_cel(9)Walk through the Command Effects Log.✨
cy82c693_set_dmamode(9)set initial DMA mode data✨
cy82c693_set_piomode(9)set initial PIO mode data✨
cy8c95x0_regmap_read_bits(9)reads a register using the regmap cache✨
cy8c95x0_regmap_update_bits(9)updates a register using the regmap cache✨
cy8c95x0_regmap_write_bits(9)writes a register using the regmap cache✨
cyapa_i2c_write(9)Execute i2c block data write operation✨
cyclecounter_cyc2ns(9)converts cycle counter cycles to nanoseconds✨
cypress_nor_determine_addr_mode_by_sr1(9)Determine current address mode (3 or 4-byte) by querying status register 1 (SR1).✨
cypress_nor_get_page_size(9)Get flash page size configuration.✨
cypress_nor_quad_enable_volatile(9)enable Quad I/O mode in volatile register.✨
cypress_nor_set_addr_mode_nbytes(9)Set the number of address bytes mode of current address mode.✨
cypress_nor_set_octal_dtr(9)Enable or disable octal DTR on Cypress flashes.✨
cypress_nor_sr_ready_and_clear(9)Query the Status Register of each die by using Read Any Register command to see if the whole flash is ready for new commands and clear it if there are any errors.✨
cz_ih_decode_iv(9)decode an interrupt vector✨
cz_ih_disable_interrupts(9)Disable the interrupt ring buffer✨
cz_ih_enable_interrupts(9)Enable the interrupt ring buffer✨
cz_ih_get_wptr(9)get the IH ring buffer wptr✨
cz_ih_irq_disable(9)disable interrupts✨
cz_ih_irq_init(9)init and enable the interrupt ring✨
cz_ih_set_rptr(9)set the IH ring buffer rptr✨

D

d_add(9)add dentry to hash queues✨
d_add_ci(9)lookup or allocate new dentry with case-exact name✨
d_alloc(9)allocate a dcache entry✨
d_alloc_pseudo(9)allocate a dentry (for lookup-less filesystems)✨
d_ancestor(9)search for an ancestor✨
d_backing_inode(9)Get upper or lower inode we should be using✨
d_delete(9)delete a dentry✨
d_delete_notify(9)delete a dentry and call fsnotify_delete()✨
d_drop(9)drop a dentry✨
d_find_alias(9)grab a hashed alias of inode✨
d_find_any_alias(9)find any alias for a given inode✨
d_hash_and_lookup(9)hash the qstr then search for a dentry✨
d_inode(9)Get the actual inode of this dentry✨
d_inode_rcu(9)Get the actual inode of this dentry with READ_ONCE()✨
d_instantiate(9)fill in inode information for a dentry✨
d_invalidate(9)detach submounts, prune dcache, and drop✨
d_lookup(9)search for a dentry✨
d_namespace_path(9)lookup a name associated with a given path✨
d_obtain_alias(9)find or allocate a DISCONNECTED dentry for a given inode✨
d_obtain_root(9)find or allocate a dentry for a given inode✨
d_path(9)return the path of a dentry✨
d_real(9)Return the real dentry✨
d_real_inode(9)Return the real inode hosting the data✨
d_really_is_negative(9)Determine if a dentry is really negative (ignoring fallthroughs)✨
d_really_is_positive(9)Determine if a dentry is really positive (ignoring fallthroughs)✨
d_rehash(9)add an entry back to the hash✨
d_same_name(9)compare dentry name with case-exact name✨
d_splice_alias(9)splice a disconnected dentry into the tree if one exists✨
d_unhashed(9)is dentry hashed✨
d_walk(9)walk the dentry tree✨
da7210_set_dai_pll(9)Configure the codec PLL✨
da8xx_cfgchip_register_usb1_clk48(9)Register a new USB 1.1 PHY clock✨
da8xx_musb_disable(9)disable HDRC and flush interrupts✨
da8xx_musb_enable(9)enable interrupts✨
da8xx_rproc_callback(9)inbound virtqueue message handler✨
dal_cmd_table_helper_transmitter_bp_to_atom(9)Translate the Transmitter to the corresponding ATOM BIOS value✨
dal_cmd_table_helper_transmitter_bp_to_atom2(9)Translate the Transmitter to the corresponding ATOM BIOS value✨
DALSMC_MSG_BacoAudioD3PME(9)Wake the audio block from D3/BACO.✨
DALSMC_MSG_GetMsgHeaderVersion(9)Query the DALSMC header version running on PMFW.✨
DALSMC_MSG_IndicatePstateStatus(9)Indicate to PMFW various DMU behaviors required to support UCLK P-state, for example whether or not DMU needs to modulate refresh rate to perform UCLK switches.✨
DALSMC_MSG_ReturnHardMinStatus(9)Query outstanding hard-min request status.✨
DALSMC_MSG_SetDisplayIdleOptimizations(9)Notify PMFW of DCN idle-state conditions.✨
DALSMC_MSG_SetHardMinByFreq(9)Set a lower bound frequency constraint on a PPCLK.✨
DALSMC_MSG_SetMinDeepSleepDcfclk(9)Set the minimum DCFCLK frequency in deep sleep.✨
DALSMC_MSG_SetStutterEfficiency(9)Report DCN stutter efficiency to PMFW.✨
DALSMC_MSG_TestMessage(9)Test interface connectivity.✨
DALSMC_MSG_TransferTableSmu2Dram(9)Transfer a PMFW table into DRAM. DALSMC_MSG_TransferTableDram2Smu - Transfer a DRAM buffer into PMFW.✨
DALSMC_MSG_UpdateUTMQoSRequest(9)Update the active UTM QoS bandwidth/latency request.✨
damage tracking(9)✨
damageclips (int)(9)✨
damon_call(9)Invoke a given function on DAMON worker thread (kdamond).✨
damon_commit_ctx(9)Commit parameters of a DAMON context to another.✨
damon_initialized(9)Return if DAMON is ready to be used.✨
damon_is_registered_ops(9)Check if a given damon_operations is registered.✨
damon_is_running(9)Returns if a given DAMON context is running.✨
damon_kdamond_pid(9)Return pid of a given DAMON context's worker thread.✨
damon_nr_accesses_mvsum(9)Returns moving sum access frequency score.✨
damon_nr_running_ctxs(9)Return number of currently running contexts.✨
damon_probe_hits_wsum(9)Returns probe hits weighted sum of a region.✨
damon_register_ops(9)Register a monitoring operations set to DAMON.✨
damon_select_ops(9)Select a monitoring operations to use with the context.✨
damon_set_attrs(9)Set attributes for the monitoring.✨
damon_set_region_system_rams_default(9)Set the region of the given monitoring target as requested, or to cover all 'System RAM' resources.✨
damon_set_schemes(9)Set data access monitoring based operation schemes.✨
damon_start(9)Starts the monitorings for a given group of contexts.✨
damon_stop(9)Stops the monitorings for a given group of contexts.✨
damon_update_region_access_rate(9)Update the access rate of a region.✨
damos_commit_quota_goals(9)Commit DAMOS quota goals to another quota.✨
damos_filter_for_ops(9)Return if the filter is ops-handled one.✨
damos_filters_default_reject(9)decide whether to reject memory that didn't match with any given filter.✨
damos_sysfs_populate_region_dir(9)Populate a schemes tried region dir.✨
damos_walk(9)Invoke a given functions while DAMOS walk regions.✨
dap8211r_config_init(9)Initialize PHY✨
dap8211r_modify_ext(9)Modify extended register bits✨
dap8211r_read_ext(9)Read extended register✨
dasd_biodasdinfo(9)fill out the dasd information structure✨
dat_crstep_xchg_atomic(9)Atomically exchange a gmap CRSTE with another.✨
dat_entry_walk(9)Walk the gmap page tables.✨
dat_perform_essa(9)Perform ESSA actions on the PGSTE.✨
dat_set_cmma_bits(9)Set CMMA bits for a range of guest pages.✨
dat_test_age_gfn(9)Test young.✨
Data messages(9)✨
Data path helpers(9)✨
data_key_init(9)initialize data key.✨
data_nodes_cmp(9)compare 2 data nodes.✨
data_race(9)mark an expression as containing intentional data races✨
data_read(9)Read function for "data" sysfs attribute✨
data_vio_allocate_data_block(9)Allocate a data block.✨
data_vls_operational(9)Verify if data VL BCT credits and MTU are both set.✨
databuf_lo_before_commit(9)Scan the data buffers, writing as we go✨
datagram_poll(9)generic datagram poll✨
datagram_poll_queue(9)same as datagram_poll, but on a specific receive queue✨
Datapath(9)✨
dataref and headerless skbs(9)✨
davinci_emac_exit(9)EMAC driver module exit✨
davinci_emac_init(9)EMAC driver module init✨
davinci_emac_probe(9)EMAC device probe✨
davinci_emac_remove(9)EMAC device remove✨
davinci_lpsc_clk_register(9)register LPSC clock✨
davinci_pll_auxclk_register(9)Register bypass clock (AUXCLK)✨