section 9 · Kernel routines 🧠

87928 pages · page 437 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

Z (continued)

zd_op_tx(9)transmits a network frame to the device✨
zd_rx_rate(9)report zd-rate✨
zd_usb_disable_tx(9)disable transmission✨
zd_usb_enable_tx(9)enables transmission✨
zd_usb_tx(9)initiates transfer of a frame of the device✨
zero_dent_node_unused(9)zero out unused fields of an on-flash directory entry node.✨
zero_ino_node_unused(9)zero out unused fields of an on-flash inode node.✨
zero_region(9)Read-only region prefilled with zeroes✨
zero_trun_node_unused(9)zero out unused fields of an on-flash truncation node.✨
zerocopy_sg_from_iter(9)Build a zerocopy datagram from an iov_iter✨
zfcp_adapter_enqueue(9)enqueue a new adapter to the list✨
zfcp_adapter_release(9)remove the adapter from the resource list✨
zfcp_ccw_activate(9)activate adapter and wait for it to finish✨
zfcp_ccw_notify(9)ccw notify function✨
zfcp_ccw_probe(9)probe function of zfcp driver✨
zfcp_ccw_remove(9)remove function of zfcp driver✨
zfcp_ccw_set_offline(9)set_offline function of zfcp driver✨
zfcp_ccw_set_online(9)set_online function of zfcp driver✨
zfcp_ccw_shutdown(9)handle shutdown from cio✨
zfcp_dbf_adapter_register(9)registers debug feature for an adapter✨
zfcp_dbf_adapter_unregister(9)unregisters debug feature for an adapter✨
zfcp_dbf_hba_bit_err(9)trace event for bit error conditions✨
zfcp_dbf_hba_def_err(9)trace event for deferred error messages✨
zfcp_dbf_hba_fsf_fces(9)trace event for fsf responses related to FC Endpoint Security (FCES)✨
zfcp_dbf_hba_fsf_reqid(9)trace only the tag and a request ID✨
zfcp_dbf_hba_fsf_res(9)trace event for fsf responses✨
zfcp_dbf_hba_fsf_resp_suppress(9)true if we should not trace by default✨
zfcp_dbf_hba_fsf_response(9)trace event for request completion✨
zfcp_dbf_hba_fsf_uss(9)trace event for an unsolicited status buffer✨
zfcp_dbf_hba_uas(9)trace event for sysfs unit add store✨
zfcp_dbf_rec_run(9)trace event related to running recovery✨
zfcp_dbf_rec_run_lvl(9)trace event related to running recovery✨
zfcp_dbf_rec_run_wka(9)trace wka port event with info like running recovery✨
zfcp_dbf_rec_trig(9)trace event related to triggered recovery✨
zfcp_dbf_rec_trig_lock(9)trace event related to triggered recovery with lock✨
zfcp_dbf_san_in_els(9)trace event for incoming ELS✨
zfcp_dbf_san_req(9)trace event for issued SAN request✨
zfcp_dbf_san_res(9)trace event for received SAN request✨
zfcp_dbf_scsi_abort(9)trace event for SCSI command abort✨
zfcp_dbf_scsi_common(9)Common trace event helper for scsi.✨
zfcp_dbf_scsi_devreset(9)Trace event for Logical Unit or Target Reset.✨
zfcp_dbf_scsi_eh(9)Trace event for special cases of scsi_eh callbacks.✨
zfcp_dbf_scsi_fail_send(9)trace event for failure to send SCSI command✨
zfcp_dbf_scsi_nullcmnd(9)trace NULLify of SCSI command in dev/tgt-reset.✨
zfcp_dbf_scsi_result(9)trace event for SCSI command completion✨
zfcp_diag_adapter_free(9)Frees all adapter diagnostics allocations.✨
zfcp_diag_adapter_setup(9)Setup storage for adapter diagnostics.✨
zfcp_diag_support_sfp(9)Return %true if the @adapter supports reporting SFP Data.✨
zfcp_diag_update_buffer_limited(9)Collect diagnostics and update a diagnostics buffer rate limited.✨
zfcp_diag_update_config_data_buffer(9)Implementation of &typedef zfcp_diag_update_buffer_func to collect and update Config Data.✨
zfcp_diag_update_port_data_buffer(9)Implementation of &typedef zfcp_diag_update_buffer_func to collect and update Port Data.✨
zfcp_diag_update_xdata(9)Update a diagnostics buffer.✨
zfcp_erp_adapter_reopen(9)Reopen adapter.✨
zfcp_erp_adapter_reset_sync(9)Really reopen adapter and wait.✨
zfcp_erp_adapter_shutdown(9)Shutdown adapter.✨
zfcp_erp_clear_adapter_status(9)clear adapter status bits✨
zfcp_erp_clear_lun_status(9)clear lun status bits✨
zfcp_erp_clear_port_status(9)clear port status bits✨
zfcp_erp_lun_reopen(9)initiate reopen of a LUN✨
zfcp_erp_lun_shutdown(9)Shutdown LUN✨
zfcp_erp_lun_shutdown_wait(9)Shutdown LUN and wait for erp completion✨
zfcp_erp_notify(9)Trigger ERP action.✨
zfcp_erp_port_forced_reopen(9)Forced close of port and open again✨
zfcp_erp_port_reopen(9)trigger remote port recovery✨
zfcp_erp_port_shutdown(9)Shutdown port✨
zfcp_erp_set_adapter_status(9)set adapter status bits✨
zfcp_erp_set_lun_status(9)set lun status bits✨
zfcp_erp_set_port_status(9)set port status bits✨
zfcp_erp_thread_kill(9)Stop ERP thread.✨
zfcp_erp_thread_setup(9)Start ERP thread for adapter✨
zfcp_erp_timeout_handler(9)Trigger ERP action from timed out ERP request✨
zfcp_erp_try_rport_unblock(9)unblock rport if no more/new recovery✨
zfcp_erp_wait(9)wait for completion of error recovery on an adapter✨
zfcp_fc_enqueue_event(9)safely enqueue FC HBA API event from irq context✨
zfcp_fc_fcp_tm(9)Setup FCP command as task management command.✨
zfcp_fc_incoming_els(9)handle incoming ELS✨
zfcp_fc_ns_gid_pn(9)initiate GID_PN nameserver request✨
zfcp_fc_plogi_evaluate(9)evaluate PLOGI playload✨
zfcp_fc_post_event(9)post event to userspace via fc_transport✨
zfcp_fc_scan_ports(9)scan remote ports and attach new ports✨
zfcp_fc_scsi_to_fcp(9)setup FCP command with data from scsi_cmnd✨
zfcp_fc_sg_free_table(9)free memory used by scatterlists✨
zfcp_fc_sg_setup_table(9)init scatterlist and allocate, assign buffers✨
zfcp_fc_sym_name_update(9)Retrieve and update the symbolic port name✨
zfcp_fc_test_link(9)lightweight link test procedure✨
zfcp_fc_trigger_did_lookup(9)trigger the d_id lookup using a GID_PN request✨
zfcp_fsf_abort_fcp_cmnd(9)abort running SCSI command✨
zfcp_fsf_close_lun(9)close LUN✨
zfcp_fsf_close_physical_port(9)close physical port✨
zfcp_fsf_close_port(9)create and send close port request✨
zfcp_fsf_close_wka_port(9)create and send close wka port request✨
zfcp_fsf_exchange_config_data_sync(9)Request information about FCP channel.✨
zfcp_fsf_exchange_port_data(9)request information about local port✨
zfcp_fsf_exchange_port_data_sync(9)Request information about local port.✨
zfcp_fsf_fcp_cmnd(9)initiate an FCP command (for a SCSI command)✨
zfcp_fsf_fcp_handler_common(9)FCP response handler common to I/O and TMF.✨
zfcp_fsf_fcp_task_mgmt(9)Send SCSI task management command (TMF).✨
zfcp_fsf_open_lun(9)open LUN✨
zfcp_fsf_open_port(9)create and send open port request✨
zfcp_fsf_open_wka_port(9)create and send open wka-port request✨
zfcp_fsf_req_complete(9)process completion of a FSF request✨
zfcp_fsf_req_dismiss_all(9)dismiss all fsf requests✨
zfcp_fsf_req_free(9)free memory used by fsf request✨
zfcp_fsf_reqid_check(9)validate req_id contained in SBAL returned by QDIO✨
zfcp_fsf_scnprint_fc_security(9)translate FC Endpoint Security flags into mnemonics and place in a buffer✨
zfcp_fsf_send_ct(9)initiate a Generic Service request (FC-GS)✨
zfcp_fsf_send_els(9)initiate an ELS command (FC-FS)✨
zfcp_fsf_status_read(9)send status read request✨
zfcp_get_port_by_wwpn(9)find port in port list of adapter by wwpn✨
zfcp_port_enqueue(9)enqueue port to port list of adapter✨
zfcp_qdio_allocate(9)allocate queue memory and initialize QDIO data✨
zfcp_qdio_close(9)close qdio queues for an adapter✨
zfcp_qdio_fill_next(9)Fill next sbale, only for single sbal requests✨
zfcp_qdio_open(9)prepare and initialize response queue✨
zfcp_qdio_real_bytes(9)count bytes used✨
zfcp_qdio_req_init(9)initialize qdio request✨
zfcp_qdio_sbal_get(9)get free sbal in request queue, wait if necessary✨
zfcp_qdio_sbal_limit(9)set the sbal limit for a request in q_req✨
zfcp_qdio_sbale_curr(9)return current sbale on req_q for a request✨
zfcp_qdio_sbale_req(9)return pointer to sbale on req_q for a request✨
zfcp_qdio_sbals_from_sg(9)fill SBALs from scatter-gather list✨
zfcp_qdio_send(9)send req to QDIO✨
zfcp_qdio_set_data_div(9)set data division count✨
zfcp_qdio_set_sbale_last(9)set last entry flag in current sbale✨
zfcp_qdio_set_scount(9)set SBAL count value✨
zfcp_qdio_siosl(9)Trigger logging in FCP channel✨
zfcp_qdio_skip_to_last_sbale(9)skip to last sbale in sbal✨
zfcp_reqlist_add(9)Add entry to reqlist✨
zfcp_reqlist_alloc(9)Allocate and initialize reqlist✨
zfcp_reqlist_apply_for_all(9)apply a function to every request.✨
zfcp_reqlist_find(9)Lookup FSF request by its request id✨
zfcp_reqlist_find_rm(9)Lookup request by id and remove it from reqlist✨
zfcp_reqlist_free(9)Free allocated memory for reqlist✨
zfcp_reqlist_isempty(9)Check whether the request list empty✨
zfcp_reqlist_move(9)Move all entries from reqlist to simple list✨
zfcp_scsi_adapter_register(9)Allocate and register SCSI and FC host with SCSI midlayer✨
zfcp_scsi_adapter_unregister(9)Unregister SCSI and FC host from SCSI midlayer✨
zfcp_scsi_dev_lun(9)Return SCSI device LUN as 64 bit FCP LUN✨
zfcp_scsi_dif_sense_error(9)Report DIF/DIX error as driver sense error✨
zfcp_scsi_set_prot(9)Configure DIF/DIX support in scsi_host✨
zfcp_scsi_sysfs_host_reset(9)Support scsi_host sysfs attribute host_reset.✨
zfcp_scsi_task_mgmt_function(9)Send a task management function (sync).✨
zfcp_scsi_terminate_rport_io(9)Terminate all I/O on a rport✨
zfcp_status_read_refill(9)refill the long running status_read_requests✨
zfcp_unit_add(9)add unit to unit list of a port.✨
zfcp_unit_find(9)Find and return zfcp_unit with specified FCP LUN✨
zfcp_unit_queue_scsi_scan(9)Register configured units on port✨
zfcp_unit_release(9)Drop reference to zfcp_port and free memory of zfcp_unit.✨
zfcp_unit_remove(9)Remove entry from list of configured units✨
zfcp_unit_scsi_scan(9)Register LUN with SCSI midlayer✨
zfcp_unit_sdev(9)Return SCSI device for zfcp_unit✨
zfcp_unit_sdev_status(9)Return zfcp LUN status for SCSI device✨
zfree(9)kernel memory management routines✨
zl10036_attach(9)Attach a zl10036 tuner to the supplied frontend structure.✨
zl3073x_chan_df_offset_get(9)get cached df_offset vs tracked reference✨
zl3073x_chan_df_offset_set(9)write delta frequency offset to hardware✨
zl3073x_chan_is_ho_ready(9)check if holdover is ready✨
zl3073x_chan_is_locked(9)check if channel is locked to a reference✨
zl3073x_chan_lock_state_get(9)get DPLL channel lock state✨
zl3073x_chan_mode_get(9)get DPLL channel operating mode✨
zl3073x_chan_mode_is_auto(9)check if channel is in automatic mode✨
zl3073x_chan_mode_is_nco(9)check if channel is in NCO mode✨
zl3073x_chan_mode_is_reflock(9)check if channel is in reflock mode✨
zl3073x_chan_mode_set(9)set DPLL channel operating mode✨
zl3073x_chan_mode_supports_tie(9)check if channel mode supports TIE write✨
zl3073x_chan_nco_mode_set(9)switch DPLL channel to NCO mode✨
zl3073x_chan_phase_step(9)execute one output phase step operation✨
zl3073x_chan_ref_get(9)get manually selected reference✨
zl3073x_chan_ref_is_selectable(9)check if reference is selectable✨
zl3073x_chan_ref_prio_get(9)get reference priority✨
zl3073x_chan_ref_prio_set(9)set reference priority✨
zl3073x_chan_ref_set(9)set manually selected reference✨
zl3073x_chan_refsel_ref_get(9)get currently selected reference in auto mode✨
zl3073x_chan_refsel_state_get(9)get reference selection state✨
zl3073x_chan_state_fetch(9)fetch DPLL channel state from hardware✨
zl3073x_chan_state_get(9)get current DPLL channel state✨
zl3073x_chan_state_set(9)commit DPLL channel state changes to hardware✨
zl3073x_chan_state_update(9)update DPLL channel status from HW✨
zl3073x_chan_tie_write(9)adjust DPLL phase using TIE write✨
zl3073x_chan_tod_adjust(9)atomic ToD read-modify-write with rollover guard✨
zl3073x_chan_tod_ctrl(9)issue ToD command✨
zl3073x_chan_tod_read(9)read ToD registers after issuing a command✨
zl3073x_chan_tod_ready_wait(9)wait for ToD semaphore to clear✨
zl3073x_chan_tod_write(9)write ToD registers and trigger 1 Hz update✨
zl3073x_dev_is_ref_phase_comp_32bit(9)check ref phase comp register size✨
zl3073x_dev_out_dpll_get(9)get DPLL ID the output is driven by✨
zl3073x_dev_out_is_diff(9)check if the given output is differential✨
zl3073x_dev_out_is_enabled(9)check if the given output is enabled✨
zl3073x_dev_out_is_stepped(9)check if output is in step-time mask✨
zl3073x_dev_out_synth_get(9)get synth connected to given output✨
zl3073x_dev_output_pin_freq_get(9)get output pin frequency✨
zl3073x_dev_output_pin_is_enabled(9)check if the given output pin is enabled✨
zl3073x_dev_phase_meas_setup(9)setup phase offset measurement✨
zl3073x_dev_probe(9)initialize zl3073x device✨
zl3073x_dev_ref_freq_get(9)get input reference frequency✨
zl3073x_dev_ref_is_diff(9)check if the given input reference is differential✨
zl3073x_dev_start(9)Start normal operation✨
zl3073x_dev_stop(9)Stop normal operation✨
zl3073x_dev_synth_freq_get(9)get synth current freq✨
zl3073x_devlink_flash_finish(9)Leave flash mode and resume normal operation✨