section 9 · Kernel routines 🧠

87928 pages · page 388 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

T (continued)

tdme_settxpower(9)Sets the tx power for MLME_SET phyTransmitPower✨
tdp_mmu_unlink_sp(9)Remove a shadow page from the list of used pages✨
tdsignal(9)post signal to a thread, process, or process group✨
tdsignal(9freebsd)post signal to a thread, process, or process group✨
tdx_hcall_get_quote(9)Wrapper to request TD Quote using GetQuote hypercall.✨
tdx_mcall_extend_rtmr(9)Wrapper to extend RTMR registers using TDG.MR.RTMR.EXTEND TDCALL.✨
tdx_mcall_get_report0(9)Wrapper to get TDREPORT0 (a.k.a. TDREPORT subtype 0) using TDG.MR.REPORT TDCALL.✨
teardown_percpu_nmi(9)undoes NMI setup of IRQ line✨
tee_bnxt_copy_coredump(9)Copy coredump from the allocated memory Uses an OP-TEE call to copy coredump✨
tee_bnxt_fw_load(9)Load the bnxt firmware Uses an OP-TEE call to start a secure boot process. Returns 0 on success, negative errno otherwise.✨
tee_client_cancel_req(9)Request cancellation of the previous open- session or invoke-command operations in a Trusted Application✨
tee_client_close_context(9)Close a TEE context✨
tee_client_close_session(9)Close a session to a Trusted Application✨
tee_client_get_version(9)Query version of TEE✨
tee_client_invoke_func(9)Invoke a function in a Trusted Application✨
tee_client_open_context(9)Open a TEE context✨
tee_client_open_session(9)Open a session to a Trusted Application✨
tee_client_system_session(9)Declare session as a system session✨
tee_device_alloc(9)Allocate a new struct tee_device instance✨
tee_device_get(9)Increment the user count for a tee_device✨
tee_device_put(9)Decrease the user count for a tee_device✨
tee_device_register(9)Registers a TEE device✨
tee_device_set_dev_groups(9)Set device attribute groups✨
tee_device_unregister(9)Removes a TEE device✨
tee_get_drvdata(9)Return driver_data pointer✨
TEE_IOC_CANCEL(9)Cancels an open session or invoke✨
TEE_IOC_CLOSE_SESSION(9)Closes a session✨
TEE_IOC_INVOKE(9)Invokes a function in a Trusted Application✨
TEE_IOC_OPEN_SESSION(9)opens a session to a Trusted Application✨
TEE_IOC_SHM_ALLOC(9)allocate shared memory✨
TEE_IOC_SHM_REGISTER(9)Register shared memory argument✨
TEE_IOC_SHM_REGISTER_FD(9)register a shared memory from a file descriptor✨
TEE_IOC_SUPPL_RECV(9)Receive a request for a supplicant function✨
TEE_IOC_SUPPL_SEND(9)Send a response to a received request✨
TEE_IOC_VERSION(9)query version of TEE✨
tee_mm_communicate(9)Pass a buffer to StandaloneMM running in TEE✨
tee_protmem_static_pool_alloc(9)Create a protected memory manager✨
tee_session_calc_client_uuid(9)Calculates client UUID for session✨
tee_shm_alloc_dma_mem(9)Allocate DMA memory as shared memory object✨
tee_shm_alloc_kernel_buf(9)Allocate kernel shared memory for a particular TEE client driver✨
tee_shm_alloc_priv_buf(9)Allocate shared memory for private use by specific TEE driver✨
tee_shm_alloc_user_buf(9)Allocate shared memory for user space✨
tee_shm_free(9)Free shared memory✨
tee_shm_get_fd(9)Increase reference count and return file descriptor✨
tee_shm_get_from_id(9)Find shared memory object and increase reference count✨
tee_shm_get_id(9)Get id of a shared memory object✨
tee_shm_get_pa(9)Get physical address of a shared memory plus an offset✨
tee_shm_get_page_offset(9)Get shared buffer offset from page start✨
tee_shm_get_pages(9)Get list of pages that hold shared buffer✨
tee_shm_get_size(9)Get size of shared memory buffer✨
tee_shm_get_va(9)Get virtual address of a shared memory plus an offset✨
tee_shm_is_dynamic(9)Check if shared memory object is of the dynamic kind✨
tee_shm_pool_free(9)Free a shared memory pool✨
tee_shm_put(9)Decrease reference count on a shared memory handle✨
tee_shm_register_fd(9)Register shared memory from file descriptor✨
tee_shm_register_kernel_buf(9)Register kernel shared memory for a particular TEE client driver✨
tee_shm_register_user_buf(9)Register a userspace shared memory buffer✨
teedev_close_context(9)closes a struct tee_context✨
teedev_ctx_get(9)Increment the reference count of a context✨
teedev_ctx_put(9)Decrease reference count on a context✨
teedev_open(9)Open a struct tee_device✨
tegra114_car_barrier(9)wait for pending writes to the CAR to complete✨
tegra114_clock_assert_dfll_dvco_reset(9)assert the DFLL's DVCO reset✨
tegra114_clock_deassert_dfll_dvco_reset(9)deassert the DFLL's DVCO reset✨
tegra114_clock_tune_cpu_trimmers_high(9)use high-voltage propagation delays✨
tegra114_clock_tune_cpu_trimmers_init(9)set up and enable clk prop delays✨
tegra114_clock_tune_cpu_trimmers_low(9)use low-voltage propagation delays✨
tegra124_132_clock_init_post(9)clock initialization postamble for T124/T132✨
tegra124_132_clock_init_pre(9)clock initialization preamble for T124/T132✨
tegra124_car_barrier(9)wait for pending writes to the CAR to complete✨
tegra124_clock_apply_init_table(9)initialize clocks on Tegra124 SoCs✨
tegra124_clock_assert_dfll_dvco_reset(9)assert the DFLL's DVCO reset✨
tegra124_clock_deassert_dfll_dvco_reset(9)deassert the DFLL's DVCO reset✨
tegra124_clock_init(9)Tegra124-specific clock initialization✨
tegra132_clock_apply_init_table(9)initialize clocks on Tegra132 SoCs✨
tegra132_clock_init(9)Tegra132-specific clock initialization✨
tegra210_car_barrier(9)wait for pending writes to the CAR to complete✨
tegra210_clock_apply_init_table(9)initialize clocks on Tegra210 SoCs✨
tegra210_clock_assert_dfll_dvco_reset(9)assert the DFLL's DVCO reset✨
tegra210_clock_deassert_dfll_dvco_reset(9)deassert the DFLL's DVCO reset✨
tegra210_clock_init(9)Tegra210-specific clock initialization✨
tegra_cvb_add_opp_table(9)build OPP table from Tegra CVB tables✨
tegra_dc_state_setup_clock(9)check clock settings and store them in atomic state✨
tegra_dfll_register(9)probe a Tegra DFLL device✨
tegra_dfll_resume(9)reinitialize DFLL on resume✨
tegra_dfll_runtime_resume(9)enable all clocks needed by the DFLL✨
tegra_dfll_runtime_suspend(9)disable all clocks needed by the DFLL✨
tegra_dfll_suspend(9)check DFLL is disabled✨
tegra_dfll_unregister(9)release all of the DFLL driver resources for a device✨
tegra_emc_rate_requests_init(9)Initialize EMC rate request tracking✨
tegra_emc_set_max_rate(9)Update maximum rate request for a request type✨
tegra_emc_set_min_rate(9)Update minimum rate request for a request type✨
tegra_get_cpu_powergate_id(9)convert from CPU ID to partition ID✨
tegra_i2c_writel(9)safely write to an I2C client controller register✨
tegra_init_apbmisc(9)Initializes Tegra APBMISC and Strapping registers.✨
tegra_ivc_notified(9)handle internal messages @ivc pointer of the IVC channel✨
tegra_ivc_read_advance(9)Advance the read queue @ivc pointer of the IVC channel✨
tegra_ivc_read_get_next_frame(9)Peek at the next frame to receive @ivc pointer of the IVC channel✨
tegra_ivc_reset(9)initiates a reset of the shared memory state @ivc pointer of the IVC channel✨
tegra_ivc_write_advance(9)Advance the write queue @ivc pointer of the IVC channel✨
tegra_ivc_write_get_next_frame(9)Poke at the next frame to transmit @ivc pointer of the IVC channel✨
tegra_mipi_disable(9)Disable the Tegra MIPI calibration device.✨
tegra_mipi_enable(9)Enable the Tegra MIPI calibration device.✨
tegra_mipi_finish_calibration(9)Finish the Tegra MIPI calibration sequence.✨
tegra_mipi_free(9)Free a Tegra MIPI calibration device.✨
tegra_mipi_request(9)Request a Tegra MIPI calibration device.✨
tegra_mipi_start_calibration(9)Start the Tegra MIPI calibration sequence.✨
tegra_pmc_cpu_is_powered(9)check if CPU partition is powered✨
tegra_pmc_cpu_power_on(9)power on CPU partition✨
tegra_pmc_cpu_remove_clamping(9)remove power clamps for CPU partition✨
tegra_pmc_io_pad_power_disable(9)disable power to I/O pad✨
tegra_pmc_io_pad_power_enable(9)enable power to I/O pad✨
tegra_pmc_powergate_power_off(9)power off partition✨
tegra_pmc_powergate_power_on(9)power on partition✨
tegra_pmc_powergate_remove_clamping(9)remove power clamps for partition✨
tegra_pmc_powergate_sequence_power_up(9)power up partition✨
tegra_powergate_is_powered(9)check if partition is powered✨
tegra_powergate_set(9)set the state of a partition✨
tegra_qspi_handle_timeout(9)Handle transfer timeout with hardware check✨
tegra_soctherm_set_hwtrips(9)set HW trip point from DT data✨
tegra_uart_wait_cycle_time(9)Wait for N UART clock periods✨
telem_device_free(9)Callback to free the telem_device_data structure.✨
telem_device_probe(9)Callback when creating a new device.✨
telem_open(9)Callback for when the device node is opened.✨
telemetry_clear_pltdata(9)Clear the platform specific Data✨
telemetry_get_evtname(9)Checkif platform config is valid✨
telemetry_get_pltdata(9)Return telemetry platform config✨
telemetry_get_trace_verbosity(9)Get the IOSS & PSS Trace verbosity✨
telemetry_raw_read_eventlog(9)Fetch the Telemetry log from PSS or IOSS✨
telemetry_read_eventlog(9)Fetch the Telemetry log from PSS or IOSS✨
telemetry_read_events(9)Fetches samples as specified by evtlog.telem_evt_id✨
telemetry_set_pltdata(9)Set the platform specific Data✨
telemetry_set_trace_verbosity(9)Update the IOSS & PSS Trace verbosity✨
temperature_from_RAM(9)Convert the read info to temperature✨
teo-description(9)✨
teo_enable_device(9)Initialize the governor's data for the target CPU.✨
teo_find_shallower_state(9)Find shallower idle state matching given duration.✨
teo_reflect(9)Note that governor data for the CPU need to be updated.✨
teo_select(9)Selects the next idle state to enter.✨
teo_update(9)Update CPU metrics after wakeup.✨
TEST(9)Defines the test function and creates the registration stub✨
Test mode(9)✨
test__insn_x86(9)test x86 instruction decoder - new instructions.✨
test__keep_tracking(9)test using a dummy software event to keep tracking.✨
test__parse_no_sample_id_all(9)test parsing with no sample_id_all bit set.✨
test__perf_time_to_tsc(9)test converting perf time to TSC.✨
test__sample_parsing(9)test sample parsing.✨
test__switch_tracking(9)test using sched_switch and tracking events.✨
test_and_change_bit(9)Change a bit and return its old value✨
test_and_clear_bit(9)Clear a bit and return its old value✨
test_and_clear_wake_up_bit(9)clear a bit if it was set: wake up anyone waiting on that bit✨
test_and_clear_young_ptes(9)Mark PTEs that map consecutive pages of the same folio as old✨
test_and_set_bit(9)Set a bit and return its old value✨
test_and_set_bit_lock(9)Set a bit and return its old value, for lock✨
test_event_set(9)Sends command to EC to cause an EC test event.✨
TEST_F(9)Emits test registration and helpers for fixture-based test cases✨
TEST_HARNESS_MAIN(9)Simple wrapper to run the test harness✨
test_kuid_root_in_ns_init_ns_nonzero(9)Test kuid_root_in_ns with init namespace and non-zero UID✨
test_kuid_root_in_ns_init_ns_uid0(9)Test kuid_root_in_ns with init namespace and UID 0✨
test_kuid_root_in_ns_with_different_mappings(9)Test with multiple namespaces✨
test_kuid_root_in_ns_with_mapping(9)Test kuid_root_in_ns with namespace where uid 0 maps to different kuid✨
test_pages_isolated(9)check if pageblocks in range are isolated✨
TEST_SIGNAL(9)✨
test_vfsuid_root_in_currentns_init_ns(9)Test vfsuid_root_in_currentns with init ns✨
test_vfsuid_root_in_currentns_invalid(9)Test vfsuid_root_in_currentns with invalid vfsuid✨
test_vfsuid_root_in_currentns_nonzero(9)Test vfsuid_root_in_currentns with non-zero UID✨
testenv(9)kernel environment variable functions✨
testenv(9freebsd)kernel environment variable functions✨
testmode_show(9)debugfs: show usb test mode state✨
testmode_write(9)change usb test mode state.✨
text_poke(9)Update instructions on a live kernel✨
text_poke_copy(9)Copy instructions into (an unused part of) RX memory✨
text_poke_early(9)Update instructions on a live kernel at boot time✨
text_poke_kgdb(9)Update instructions on a live kernel by kgdb✨
text_poke_set(9)memset into (an unused part of) RX memory✨
textsearch_destroy(9)destroy a search configuration✨
textsearch_find(9)start searching for a pattern✨
textsearch_find_continuous(9)search a pattern in continuous/linear data✨
textsearch_get_pattern(9)return head of the pattern✨
textsearch_get_pattern_len(9)return length of the pattern✨
textsearch_next(9)continue searching for a pattern✨
textsearch_prepare(9)Prepare a search✨
textsearch_register(9)register a textsearch module✨
textsearch_unregister(9)unregister a textsearch module✨
tfind(9)find thread, process and process group by number✨
tg3_io_error_detected(9)called when PCI error is detected✨
tg3_io_resume(9)called when traffic can start flowing again.✨
tg3_io_slot_reset(9)called after the pci bus has been reset.✨
tgafb_blank(9)Optional function. Blanks the display.✨
tgafb_check_var(9)Optional function. Validates a var passed in.✨
tgafb_fillrect(9)REQUIRED function. Can use generic routines if non acclerated hardware and packed pixel based. Draws a rectangle on the screen.✨
tgafb_imageblit(9)REQUIRED function. Can use generic routines if non acclerated hardware and packed pixel based. Copies a image from system memory to the screen.✨
tgafb_set_par(9)Optional function. Alters the hardware state.✨
tgafb_setcolreg(9)Optional function. Sets a color register.✨
th1520_aon_call_rpc(9)Send an RPC request to the TH1520 AON subsystem✨
th1520_aon_deinit(9)Clean up TH1520 AON firmware protocol interface✨
th1520_aon_init(9)Initialize TH1520 AON firmware protocol interface✨
th1520_aon_power_update(9)Change power state of a resource via TH1520 AON✨
TH_LOG(9)✨
thaw_glock(9)thaw out a glock which has an unprocessed reply waiting✨