📦 linux-manual

82568 pages · page 73 of 413

D (continued)

do_attr_changes(9)change inode attributes.✨
do_bridge_resource_split(9)find one node of resources that aren't in use✨
do_brk_flags(9)Increase the brk vma if the flags match.✨
do_budget_space(9)reserve flash space for index and data growth.✨
do_calc_lpt_geom(9)calculate sizes for the LPT area.✨
do_commit(9)commit the journal.✨
do_cros_ec_cmd_xfer_spi(9)Transfer a message over SPI and receive the reply✨
do_cros_ec_pkt_xfer_spi(9)Transfer a packet over SPI and receive the reply✨
do_disable_cpu_turbo(9)internal turbo disable function✨
do_div(9)returns 2 values: calculate remainder and update new dividend✨
do_dsemulret(9)Return from a delay slot 'emulation' frame✨
do_each_subsys_mask(9)filter for_each_subsys with a bitmask✨
do_enable_cpu_turbo(9)internal turbo enable function✨
do_error(9)Something unexpected has happened during a lock request✨
do_filldir_main(9)read out directory entries✨
do_find_free_space(9)find a data LEB with free space.✨
do_flash_update(9)Excute flash update (write image or CVPD)✨
do_fpu_inst(9)Handle reserved instructions for FPU emulation✨
do_freezer_trap(9)handle the freezer jobctl trap✨
do_fw_call_hvc(9)Call system-level platform management layer (HVC)✨
do_fw_call_smc(9)Call system-level platform management layer (SMC)✨
do_get_kexec_buffer(9)Get address and size of device tree property✨
do_gfs2_set_flags(9)set flags on an inode✨
do_gro(9)perform Generic Receive Offload ingress packet processing✨
do_grow(9)Touch and update inode size✨
do_inode_permission(9)UNIX permission checking✨
do_int80_emulation(9)32-bit legacy syscall C entry from asm✨
do_jobctl_trap(9)take care of ptrace jobctl traps✨
do_kernel_power_off(9)Execute kernel power-off handler call chain✨
do_kernel_restart(9)Execute kernel restart handler call chain✨
do_kill_orphans(9)remove orphan inodes from the index.✨
do_lock_mount(9)acquire environment for mounting✨
do_lookup_nm(9)look up a "hashed" node.✨
do_make_pnode_dirty(9)mark a pnode dirty.✨
do_mem_probe(9)validate a memory region for PCMCIA use✨
do_mmap(9)Perform a userland memory mapping into the current process address space of length @len with protection bits @prot, mmap flags @flags (from which VMA flags will be inferred), and any additional VMA…✨
do_notify_parent_cldstop(9)notify parent of stopped/continued state change✨
do_otp_lock(9)[DEFAULT] Lock OTP block area✨
do_otp_read(9)[DEFAULT] Read OTP block area✨
do_otp_write(9)[DEFAULT] Write OTP block area✨
do_output_char(9)output one character✨
do_passive_init(9)complete probing when partner device is detected.✨
do_pata_set_dmamode(9)Initialize host controller PATA PIO timings✨
do_pci_add_dynid(9)Add a new PCI device ID to this driver and re-probe✨
do_pci_match_id(9)See if a PCI ID matches a given pci_id table✨
do_pre_bridge_resource_split(9)find node of resources that are unused✨
do_promote(9)promote as many requests as possible on the current queue✨
do_reset(9)issue a reset command✨
do_set_multicast_list(9)set/clear multicast filter✨
do_setattr(9)Smack process attribute setting✨
do_settimeofday64(9)Sets the time of day.✨
do_shash(9)Do a synchronous hash operation in software✨
do_shrink(9)make a file smaller✨
do_siga_output(9)perform SIGA-w/wt function✨
do_signal_stop(9)handle group stop for SIGSTOP and other stop signals✨
do_sigtimedwait(9)wait for queued signals specified in @which✨
do_smart_update(9)optimized update_queue✨
do_smart_wakeup_zero(9)wakeup all wait for zero tasks✨
do_splice_direct(9)splices data directly between two files✨
do_sync_erase(9)run the erase worker synchronously.✨
do_sysinfo(9)fill in sysinfo struct✨
do_truncation(9)truncate an inode.✨
do_unregister_con_driver(9)unregister console driver from console layer✨
do_validate_mem(9)low level validate a memory region for PCMCIA use✨
do_work(9)do one pending work.✨
do_write_orph_node(9)write a node to the orphan head.✨
do_xfer(9)Do one transfer✨
do_xfer_with_response(9)Do one transfer and wait until the delayed response is received✨
do_xmote(9)Calls the DLM to change the state of a lock✨
doc_backup_oob(9)Backup OOB into docg3 structure✨
doc_block_isbad(9)Checks whether a block is good or not✨
doc_delay(9)delay docg3 operations✨
doc_ecc_bch_fix_data(9)Fix if need be read data from flash✨
doc_ecc_disable(9)Disable Hamming and BCH ECC hardware calculator✨
doc_erase(9)Erase a portion of the chip✨
doc_erase_block(9)Erase a couple of blocks✨
doc_fill_autooob(9)Fill a 16 bytes OOB from 8 non-ECC bytes✨
doc_get_bch_hw_ecc(9)Get hardware calculated BCH ECC✨
doc_get_erase_count(9)Get block erase count✨
doc_get_op_status(9)get erase/write operation status✨
doc_guess_autoecc(9)Guess autoecc mode from mbd_oob_ops✨
doc_hamming_ecc_init(9)Initialize hardware Hamming ECC engine✨
doc_page_finish(9)Ends reading/writing of a flash page✨
doc_probe_device(9)Check if a device is available✨
doc_read_data_area(9)Read data from data area✨
doc_read_oob(9)Read out of band bytes from flash✨
doc_read_page_ecc_init(9)Initialize hardware ECC engine✨
doc_read_page_finish(9)Ends reading of a flash page✨
doc_read_page_getbytes(9)Reads bytes from a prepared page✨
doc_read_page_prepare(9)Prepares reading data from a flash page✨
doc_read_seek(9)Set both flash planes to the specified block, page for reading✨
doc_release_device(9)Release a docg3 floor✨
doc_set_asic_mode(9)Set the ASIC mode✨
doc_set_device_id(9)Sets the devices id for cascaded G3 chips✨
doc_set_driver_info(9)Fill the mtd_info structure and docg3 structure✨
doc_set_extra_page_mode(9)Change flash page layout✨
doc_set_reliable_mode(9)Sets the flash to normal or reliable data mode✨
doc_setup_addr_sector(9)Setup blocks/page/ofs address for one plane✨
doc_setup_writeaddr_sector(9)Setup blocks/page/ofs address for one plane✨
doc_write_data_area(9)Write data into data area✨
doc_write_erase_wait_status(9)wait for write or erase completion✨
doc_write_oob(9)Write out of band bytes to flash✨
doc_write_page(9)Write a single page to the chip✨
doc_write_page_ecc_init(9)Initialize hardware BCH ECC engine✨
doc_write_page_putbytes(9)Writes bytes into a prepared page✨
doc_write_seek(9)Set both flash planes to the specified block, page for writing✨
docg3_probe(9)Probe the IO space for a DiskOnChip G3 chip✨
docg3_release(9)Release the driver✨
docg3_resume(9)Awakens docg3 floor✨
docg3_suspend(9)Put in low power mode the docg3 floor✨
dock_in_progress(9)see if we are in the middle of handling a dock event✨
dock_notify(9)Handle ACPI dock notification.✨
dock_present(9)see if the dock station is present.✨
domain_dirty_limits(9)calculate thresh and bg_thresh for a wb_domain✨
domain_is_scoped(9)Check if an interaction from a client/sender to a server/receiver should be restricted based on scope controls.✨
domain_scope_le(9)Checks domain ordering for scoped ptrace✨
domain_setup_l3_mon_state(9)Initialise domain monitoring structures.✨
done_already(9)determine if a reference has been done already.✨
done_seqretry(9)end seqlock_t "locking or lockless" reader section✨
done_seqretry_irqrestore(9)end a seqlock_t lockless reader, or a non- interruptible locking reader section✨
down(9)acquire the semaphore✨
down_interruptible(9)acquire the semaphore unless interrupted✨
down_killable(9)acquire the semaphore unless killed✨
down_timeout(9)acquire the semaphore within a specified time✨
down_trylock(9)try to acquire the semaphore, without waiting✨
dp cec helpers(9)✨
dp dual mode helpers(9)✨
dp helpers(9)✨
dp mst helper(9)✨
dp83td510_cable_test_get_alcd_status(9)Get the status of the ALCD test for the DP83TD510 PHY.✨
dp83td510_cable_test_get_status(9)Get the status of the cable test for the DP83TD510 PHY.✨
dp83td510_cable_test_get_tdr_status(9)Get the status of the TDR test for the DP83TD510 PHY.✨
dp83td510_cable_test_start(9)Start the cable test for the DP83TD510 PHY.✨
dp83td510_update_stats(9)Update the PHY statistics for the DP83TD510 PHY.✨
dp83tg720_cable_test_get_status(9)Get the status of the cable test for the DP83TG720 PHY.✨
dp83tg720_cable_test_start(9)Start the cable test for the DP83TG720 PHY.✨
dp83tg720_get_next_update_time(9)Return next polling interval for PHY state✨
dp83tg720_update_stats(9)Update the PHY statistics for the DP83TD510 PHY.✨
dp_aux_ep_dev_release(9)Free memory for the dp_aux_ep device✨
dp_aux_ep_match(9)The match function for the dp_aux_bus.✨
dp_aux_ep_probe(9)The probe function for the dp_aux_bus.✨
dp_aux_ep_remove(9)The remove function for the dp_aux_bus.✨
dp_aux_ep_shutdown(9)The shutdown function for the dp_aux_bus.✨
DPAA2 FD - Frame Descriptor APIs for DPAA2(9)✨
dpaa2_caam_enqueue(9)enqueue a crypto request✨
dpaa2_cscn_state_congested(9)Check congestion state✨
dpaa2_dq_byte_count(9)Get the byte count in dequeue response✨
dpaa2_dq_fd(9)Get the frame descriptor in dequeue response✨
dpaa2_dq_flags(9)Get the stat field of dequeue response✨
dpaa2_dq_fqid(9)Get the fqid in dequeue response✨
dpaa2_dq_frame_count(9)Get the frame count in dequeue response✨
dpaa2_dq_is_pull(9)Check whether the dq response is from a pull command.✨
dpaa2_dq_is_pull_complete(9)Check whether the pull command is completed.✨
dpaa2_dq_odpid(9)Get the odpid field in dequeue response✨
dpaa2_dq_seqnum(9)Get the seqnum field in dequeue response✨
dpaa2_fd_get_addr(9)get the addr field of frame descriptor✨
dpaa2_fd_get_bpid(9)Get the bpid field in the frame descriptor✨
dpaa2_fd_get_ctrl(9)Get the control bits in the frame descriptor✨
dpaa2_fd_get_flc(9)Get the flow context in the frame descriptor✨
dpaa2_fd_get_format(9)Get the format field in the frame descriptor✨
dpaa2_fd_get_frc(9)Get the frame context in the frame descriptor✨
dpaa2_fd_get_len(9)Get the length in the frame descriptor✨
dpaa2_fd_get_offset(9)Get the offset field in the frame descriptor✨
dpaa2_fd_set_addr(9)Set the addr field of frame descriptor✨
dpaa2_fd_set_bpid(9)Set the bpid field of frame descriptor✨
dpaa2_fd_set_ctrl(9)Set the control bits in the frame descriptor✨
dpaa2_fd_set_flc(9)Set the flow context field of frame descriptor✨
dpaa2_fd_set_format(9)Set the format field of frame descriptor✨
dpaa2_fd_set_frc(9)Set the frame context in the frame descriptor✨
dpaa2_fd_set_len(9)Set the length field of frame descriptor✨
dpaa2_fd_set_offset(9)Set the offset field of frame descriptor✨
dpaa2_fl_get_addr(9)get the addr field of FLE✨
dpaa2_fl_get_bpid(9)Get the bpid field in the FLE✨
dpaa2_fl_get_ctrl(9)Get the control bits in the FLE✨
dpaa2_fl_get_flc(9)Get the flow context in the FLE✨
dpaa2_fl_get_format(9)Get the format field in the FLE✨
dpaa2_fl_get_frc(9)Get the frame context in the FLE✨
dpaa2_fl_get_len(9)Get the length in the FLE✨
dpaa2_fl_get_offset(9)Get the offset field in the frame list entry✨
dpaa2_fl_is_final(9)Check final bit in FLE✨
dpaa2_fl_set_addr(9)Set the addr field of FLE✨
dpaa2_fl_set_bpid(9)Set the bpid field of FLE✨
dpaa2_fl_set_ctrl(9)Set the control bits in the FLE✨
dpaa2_fl_set_final(9)Set the final bit in FLE✨
dpaa2_fl_set_flc(9)Set the flow context field of FLE✨
dpaa2_fl_set_format(9)Set the format field of FLE✨
dpaa2_fl_set_frc(9)Set the frame context in the FLE✨
dpaa2_fl_set_len(9)Set the length field of FLE✨
dpaa2_fl_set_offset(9)Set the offset field of FLE✨
dpaa2_io_create(9)create a dpaa2_io object.✨
dpaa2_io_down(9)release the dpaa2_io object.✨
dpaa2_io_get_adaptive_coalescing(9)Query adaptive coalescing state✨
dpaa2_io_get_cpu(9)get the cpu associated with a given DPIO object✨
dpaa2_io_get_irq_coalescing(9)Get the current IRQ coalescing parameters✨
dpaa2_io_irq(9)ISR for DPIO interrupts✨
dpaa2_io_query_bp_count(9)Query the number of buffers currently in a buffer pool.✨
dpaa2_io_query_fq_count(9)Get the frame and byte count for a given fq.✨
dpaa2_io_service_acquire(9)Acquire buffers from a buffer pool.✨
dpaa2_io_service_deregister(9)The opposite of 'register'.✨
dpaa2_io_service_enqueue_fq(9)Enqueue a frame to a frame queue.✨